| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
| Author |
Message |
|
Sam Arwas
Location: Australia Joined: 02 Dec 2015
Posts: 92
|
 Posted: Sat 03 Mar, 2018 7:04 pm Post subject: Replica Dark age swords pommel construction question |
 |
|
I've been looking to get a decent mid-range Viking/Dark age sword. So far all the ones I've looked at have a one-piece pommel with an exposed peen at the end, even Albion ones. I find this rather inauthentic and would much prefer something with a separate pommel-cap covering the peen, especially when the pommel is clearly shaped to resemble a traditional multi-part design.
Are any of the regular companies offering what I'm looking for in the $300-600USD range?
|
|
  |
 |
|
Arne G.
|
| Posted: Sat 03 Mar, 2018 7:49 pm Post subject: Re: Replica Dark age swords pommel construction question |
|
|
| Sam Arwas wrote: | I've been looking to get a decent mid-range Viking/Dark age sword. So far all the ones I've looked at have a one-piece pommel with an exposed peen at the end, even Albion ones. I find this rather inauthentic and would much prefer something with a separate pommel-cap covering the peen, especially when the pommel is clearly shaped to resemble a traditional multi-part design.
Are any of the regular companies offering what I'm looking for in the $300-600USD range? |
Actually, only the earliest offerings by Albion (which are already sold out) had the simulated two piece construction. Everything else that is intended to be two pieces riveted together is in fact just that.
However, no one does this in the low-mid price range you are looking at. You'll either have to save enough to get one of the Albions or a custom maker that will do this, or live with a one piece construction (I think Del Tins, which are in your price range, do this).
|
|
 |
|
|
Sam Arwas
Location: Australia Joined: 02 Dec 2015
Posts: 92
|
| Posted: Sat 03 Mar, 2018 8:23 pm Post subject: Re: Replica Dark age swords pommel construction question |
|
|
| Arne G. wrote: | | Sam Arwas wrote: | I've been looking to get a decent mid-range Viking/Dark age sword. So far all the ones I've looked at have a one-piece pommel with an exposed peen at the end, even Albion ones. I find this rather inauthentic and would much prefer something with a separate pommel-cap covering the peen, especially when the pommel is clearly shaped to resemble a traditional multi-part design.
Are any of the regular companies offering what I'm looking for in the $300-600USD range? |
Actually, only the earliest offerings by Albion (which are already sold out) had the simulated two piece construction. Everything else that is intended to be two pieces riveted together is in fact just that.
However, no one does this in the low-mid price range you are looking at. You'll either have to save enough to get one of the Albions or a custom maker that will do this, or live with a one piece construction (I think Del Tins, which are in your price range, do this). |
I'd prefer Valiant Armory or even Darksword over Del Tin. While I am reasonably happy with tbe one Del Tin I own (a falchion) I don't like the way they are always built without an edge (Darksword's new range is built sharp) and they all seem to be excessively heavy.
|
|
|
|
|
Leo Todeschini
Industry Professional
|
|
 |
|
Mikko Kuusirati
|
| Posted: Sun 04 Mar, 2018 4:10 am Post subject: |
|
|
There are also several types of Viking age swords with openly one-piece pommels, and some of the two-piece pommels have a visible peen. Examples of both can be seen in e.g. Ian Peirce's Swords of the Viking Age. Only the Sith deal in absolutes. 
"And sin, young man, is when you treat people like things. Including yourself. That's what sin is."
— Terry Pratchett, Carpe Jugulum
|
|
|
|
|
Luka Borscak
|
| Posted: Wed 14 Mar, 2018 12:33 pm Post subject: |
|
|
| Leo Todeschini wrote: | Well Sam,
Good news.
I was looking at a 10thC Viking sword at the BM a few years ago and it had what was clearly a one piece pommel, with a visible peen, that had been made to look like a two piece. Basically exactly what most makers make now. Not very common perhaps, but they did it.
Failing that yes you will need to go to a custom maker (like me!)
Tod |
Do you maybe remember what pommel type was it?
|
|
|
|
|
Ryan Renfro
|
|
|
|
|
Ryan Renfro
|
| Posted: Thu 15 Mar, 2018 11:48 am Post subject: |
|
|
| Quote: | | Do you maybe remember what pommel type was it? |
I think this may have been the viking-age Witham sword, no 1848,1021.1.
(Image posted with permission).
 Attachment: 66.51 KB
|
|
|
|
|
Leo Todeschini
Industry Professional
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic