[Jim Austin]

In order to provide collectors with authentically forged axes I’ve been studying the historical techniques used to make Viking axes for about the last 2-1/2 years. I thought this work might be of some interest to the myArmoury community. I have long had a great interest in both axes and forge welding and decided to develop a procedure to make Viking style axes using the “asymmetric wrap” method. I don’t know how far back this method dates (Roman era?) but its use in the Viking era and after is much in evidence based of artifacts from those times. Although the method may seem a bit round-about, it is actually well suited to the simple tools and materials (bloomery iron) available to early blacksmiths.

Here are a few axes which I have forged by the asymmetric wrap method over the last 2 years:




Among the different techniques used for forging axes the Asymmetric Wrap method refers to drawing a shank on a bar of iron or steel, forging the features of the eye into the shank, and then folding it to close the eye. The resulting joint is forge-welded shut.

Here is the starting block with its shank forged and marked:
(Note: where it appears, the white card is marked with a 1" grid)



The shank is then shaped and folded into an eye as shown in these pictures:







This is followed by forge welding and finishing the eye:



This Youtube link shows the eye-welding process in near-real time:
http://www.youtube.com/watch?v=LaPR-us9kSU&feature=share

A finished eye:



After the eye is done I shape the blade and forge weld in a bit of 1075 steel.




This is followed by finish forging to get the final profile and thickness of the axe.




If the axe is intended for household use I forge the axe a bit thick and compact and leave the forge finish. If I’m making a fighting axe I forge the blade out wide and thin and usually grind and polish it to help reduce the weight.

So far most of the axes I have forged are in the style of Type G or Type M axes (Peterson typology), but the same techniques can be used to produce a wide variety of axes (Type A – Type M, the Wheeler designations, etc.) that might be of interest to collectors. Part of the challenge and satisfaction of this work is exploring such possibilities.

I hope that this has been of interest to you.

[Reece Nelson]

Wow, that's incredible! Really interesting read

I especially like how you did the the eye bit. Thanks for posting!

-Reece

[Kai Lawson]

These look really good! Love the visual tutorial, it really pulls it all together. Are these for sale?

[Peter Johnsson]

I own two of Jim´s axes.
They are outstanding for several reasons.

They are very fine axes, as axes go.

They express a unique beauty of form and proportion: an axe ay seem like a basic tool, but it is not. The axe of the old norse is a finely made and thought out object, developed by a people who lived and died by the axe. These axes are the result of a deep understanding of the object and their design is both ingenious and graceful.

Jim´s axes are the finest example I know to capture the subtleties of form and proportion in existence today.

[Christopher B Lellis]

Are you selling any of those axes?

How much for a fighting one?

[Robert Môc]

Really,really nice work.

[Matthew G.M. Korenkiewicz]

[Robin Smith]

So awesome... Very nice!

How do you handle sales? Is it by commission, or do you make what you want and offer for sale on your site? I am quite interested.

[Jeremy V. Krause]

We are fortunate to have Jim Austin doing this important work. Soon the collector may be able to obtain a fighting axe capturing the spirit and form of the originals.

Swords have rightly captured the attention of some fine, fine craftsman who have, over the past few years, brought us a level of authenticity unmatched and Jim is bringing these high standards to the axe.

As an aficionado of the late Viking, and High Medieval periods, I need a truly fine axe, or axes, to consider my collection representative.

[David Huggins]

I would echo everyone's words here Jim. Well done and thank you for sharing.

best
Dave

[Ian Hutchison]

A fighting axe with the correct profile would be great. I'd love to have one.

[Bruno Giordan]

Great approach to the problem, Jim.

I would like to understand better how to form the first stage of the blank, it appears quite complicated to me, with regard to the method you show in your interesting youtube video.

[Jean Thibodeau]

Very good looking elegant axes and very interesting seeing the process of making them.

[Michael K Wislon]

Jim,
I believe I've seen a couple axes of yours from one of your apprentices, Ryan B. If they are the same ones, I msut say they are quite awesome. The Dane axe he showed me a few weeks ago was light and fast. great work.

[D. Bell]

I brought a couple of axes from Jim in 2011 which I am very pleased with (there are some pictures here), and I hope to expand my collection later this year. If you want a high quality, authentically constructed viking age axe then I would recommend talking to Jim Austin.

[Johan Gemvik]

Jim, I've been thinking a lot in the last few years about how these were forged back in viking times and I think a lot of us on this forum have a special place in their hearts for the Viking style axe.

The method you present makes perfect sense looking at what the shape of the eye and the rest look in the museums today.
Thanks so much for sharing this!

[Jim Austin]

I'd like to thank everyone who looked in on this topic - especially those who had comments to share. If anyone still has questions I will be glad to try and answer them. I should mention that a more technically in-depth version of the tutorial (with about 50 photos) is posted here: http://forums.dfoggknives.com/index.php?showt...mp;page=10

To answer one particular, recurring question: I do sell these axes, though I have never advertised them before. Asymmetrically welded fighting-style axes in the Type G style have so far gone from between $400 and $450 (head only) depending on the size (edge lengths are usually between 6.5" and 7.5") and some aesthetic considerations. Larger Type M axes have gone for considerably more. I am also willing to consider commissions for other styles of axes, albeit at a slower pace, to try to help satisfy some of the wider demand from the arms-collecting community. This arrangement will work best if the interested person has some good pictorial and dimensional information to provide since my main role will be to provide traditional, high-quality blacksmithing solutions to the project. That said, these projects will have learning curves for me, and I will only tackle axes (and other items with time) which I can carry out by authentic techniques to my personal standards.

Again - Thanks! Jim.

[Scott Roush]

Great post!!!

Nobody has had a larger influence on my own feeble work in axes. I just wish someday that mine can attain Jim's level of purity and grace of lines.