Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Historical Arms Talk > Custom Talhoffer-style buckler Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Mark T




PostPosted: Fri 03 Dec, 2010 2:35 am    Post subject: Custom Talhoffer-style buckler         Reply with quote

Hi all,

I'm thinking of asking Mark Vickers of St George Armoury to make me a custom buckler, based on the ones in Talhoffer's Fechtbuch (1467, as in the pic below - not the 'extra spikey' version shown in the 1459 Thott Codex).

Below are photos of Mark's standard version of this buckler; I'm going to request a spiked coppola/boss.

From a reproduction point of view, I have two questions:

Would a tubular handle like this have been used in period? The best view we have of the handle in Talhoffer is plate 238, and the handle shown there does appear to be tubular.

Question two:

Stephen Hand wrote:
The most important thing for I.33 is to have the handle set back enough that you can turn the buckler in your hand. I've seen many bucklers where the handle is flush with the back of the buckler, so you can't turn the buckler to lie along your arm.


Does the handle on Mark's version below look like it is set back far enough as Stephen describes? I think the side view photo here is not dead-on, but the handle does appear to be set back in the back view ... is it set back enough?

Thoughts, anyone?



 Attachment: 37.1 KB
Bucklers in Talhoffer w cleaner text.gif
Best view of bucklers in Talhoffer 1467

 Attachment: 29.63 KB
Talhoffer bucker by Mark Vickers - St George Armoury.jpg
Talhoffer buckler by Mark Vickers - St George Armoury

 Attachment: 19.18 KB
Talhoffer bucker by Mark Vickers - St George Armoury 2.jpg
Side view

 Attachment: 16.06 KB
Talhoffer bucker by Mark Vickers - St George Armoury 3.jpg
Handle

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!


Last edited by Mark T on Fri 03 Dec, 2010 2:54 am; edited 1 time in total
View user's profile Send private message
Mark T




PostPosted: Fri 03 Dec, 2010 2:49 am    Post subject:         Reply with quote

Here is the view of the buckler handle from Talhoffer's 1467 plate 238. I'll post two versions, as the handle detail is a little hard to make out. It's easier to see in Rector's Medieval combat.


 Attachment: 28.27 KB
Bucklers in Talhoffer w cleaner text 8.gif
Talhoffer 1467 plate 238 version 1

 Attachment: 24.54 KB
Talhoffer 1467 plate 238.jpg
Talhoffer 1467 plate 238 version 2

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Mark T




PostPosted: Fri 03 Dec, 2010 2:52 am    Post subject:         Reply with quote

And, just for comparison, the handle in Talhoffer 1459 (Thott Codex):


 Attachment: 173.85 KB
bucklers-in-Talhoffer-Thott-codex-600x385.gif


Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!


Last edited by Mark T on Fri 03 Dec, 2010 2:59 pm; edited 2 times in total
View user's profile Send private message
Craig Shackleton




Location: Ottawa, Canada
Joined: 20 Apr 2004
Likes: 1 page

Posts: 307

PostPosted: Fri 03 Dec, 2010 4:58 am    Post subject:         Reply with quote

There is a surviving example of a very similar buckler... somewhere. I've seen photos of it but I don't remember where. I don't know what the handles were like historically, at least not from looking at artifacts.

But!

That handle looks like it gives you enough room to turn the buckler on your hand if you want to. It's really about how deep the bowl is at the handle, so with a deep bowl, you don't need a set back handle.

Regardless, it is more effective (both faster and stronger) to switch your hand from pronated to supinated position to change the angle of the buckler, which does not require extra room in the boss. One of my bucklers has to be jammed onto my hand because the grip is so snug, but I can still use it for these techniques.

On the other hand. I am skeptical of the effectiveness of that style of buckler for I.33 for two reasons. The shape looks like it will make it difficult to do some of the transition that involve slipping your buckler under your sword arm. Also, the buckler is used for pinning in I.33, and never shown used for attacking directly. I suspect that the angled structure will be harder to pin with. These are my guesses having never used a buckler like that.

I do think it's a beautiful buckler, and I'd love to get one myself. If I did, I would certainly try it for I.33, I just wouldn't have high hopes. Talhoffer does his own cool stuff with that buckler, although he didn't leave us very much information about it.

If you do get this buckler, I'd love to hear how it works out for you. I really like this style and have thought about getting one for years. I don't know why I haven't yet.

Another maker that has similar bucklers is http://www.armorymarek.com/shields . In this case he's definitely got the handle running the wrong way (horizontal instead of vertical) but I imagine he could change that. The shape of the buckler is certainly lovely.

Ottawa Swordplay
View user's profile Send private message Visit poster's website
Craig Shackleton




Location: Ottawa, Canada
Joined: 20 Apr 2004
Likes: 1 page

Posts: 307

PostPosted: Fri 03 Dec, 2010 8:42 am    Post subject:         Reply with quote

The actual buckler I've seen is posted by Matt Easton (sort of) in this thread:

http://www.myArmoury.com/talk/viewtopic.php?t...p;start=20

Ottawa Swordplay
View user's profile Send private message Visit poster's website
Hugh Knight




Location: San Bernardino, CA
Joined: 26 Jan 2004
Reading list: 34 books

Posts: 739

PostPosted: Fri 03 Dec, 2010 1:46 pm    Post subject:         Reply with quote

Craig Shackleton wrote:
The actual buckler I've seen is posted by Matt Easton (sort of) in this thread:

http://www.myArmoury.com/talk/viewtopic.php?t...p;start=20


I have heard from someone who claims to have seen it that the piece to which you refer in the Bayrisches Armeemuseum is actually far too small to be a real buckler. Can anyone confirm or deny this?

One of my students, Greg Wosnak, a very talented armorer, made me a copy of the Talhoffer 1467 buckler. I like the rolled edge he applied because it matches the art and because it strengthens the rim; without it, the rim will get bent pretty easily.

My buckler is fairly small because that is my take on what the art tries to show; in particular, the boss is just big enough for my fist. If the buckler is too big my experience shows that many of the movements in Talhoffer and Lignitzer's plays become difficult to do because the buckler gets in the way. The size is about 13" x 11". We estimated this size by taking an average ratio between the buckler in Talhoffer and the length of the user's forearms (discarding the most extreme size in the art as an artistic anamoly). This is pretty rough, because the art varies significantly, but I think the proportion is reasonable.

The handle is flat stock with a wrap of heavy leather. To me, this gives a far better grip than the tubular handles I have seen, and seems to match what some buckler art shows.

Greg is an amazingly talented craftsman, and I am proud to be able to show off his handiwork.

Here is a link to a video the buckler in use so you can get a sense of the scale:
http://www.youtube.com/watch?v=ADySjvBMz54
(This is the first part of Lignitzer's first play of the buckler--the Zornhau Ort.)



 Attachment: 195.21 KB
My Buckler Front 1 small.JPG


 Attachment: 166.88 KB
My Buckler Back 1 small.JPG


Regards,
Hugh
www.schlachtschule.org
View user's profile Send private message Visit poster's website Yahoo Messenger
Craig Shackleton




Location: Ottawa, Canada
Joined: 20 Apr 2004
Likes: 1 page

Posts: 307

PostPosted: Fri 03 Dec, 2010 2:09 pm    Post subject:         Reply with quote

Hugh, that's a beautiful buckler. Does Greg sell them? The size looks good to me. I like an 11 inch diameter buckler when using a round one, because anything bigger hampers some of the techniques, at least a little.
Ottawa Swordplay
View user's profile Send private message Visit poster's website
Mark T




PostPosted: Fri 03 Dec, 2010 2:51 pm    Post subject:         Reply with quote

Hi Craig and Hugh,

Thanks for your replies.

Craig Shackleton wrote:
That handle looks like it gives you enough room to turn the buckler on your hand if you want to.


Great!

Craig Shackleton wrote:
On the other hand. I am skeptical of the effectiveness of that style of buckler for I.33 for two reasons. The shape looks like it will make it difficult to do some of the transition that involve slipping your buckler under your sword arm. Also, the buckler is used for pinning in I.33, and never shown used for attacking directly. I suspect that the angled structure will be harder to pin with. These are my guesses having never used a buckler like that.

I do think it's a beautiful buckler, and I'd love to get one myself. If I did, I would certainly try it for I.33, I just wouldn't have high hopes. Talhoffer does his own cool stuff with that buckler, although he didn't leave us very much information about it.


Yes, I'm curious to see what its pros and cons are. I was interested to read Martin Peter Forrester's comment in this thread about Hugh's Talhoffer buckler:

Martin Peter Forrester wrote:
V nice! I've been training for a bit with a similar buckler from Mark Vickers ... I find the scalloped bits great for bracing your sword against in defence, especially when guarding your shins against heavy pole arms. Hope you have as much fun as I'm having!


I'm not sure from the quote if that means that Martin is trying to use it in 'formal' Fechtbucher training, or in a more living history context, but it will be interesting to play with.

I'm keen to get one only partly to experiment and see what the practical/tactical advantages might be. Another reason is to put together a representative 'Talhoffer armoury' of one of each of the weapons in Talhoffer - I think that would make for a nice little collection.

The other reason for getting one is just to enjoy the sheer exuberance of the thing!

Thanks for the lead on Armory Marek's buckler; I hadn't seen that one yet. I'll post photos of it from his website here, to add to the discussion, for comparison, and possibly to send some orders his way.

Hugh Knight wrote:
One of my students, Greg Wosnak, a very talented armorer, made me a copy of the Talhoffer 1467 buckler. I like the rolled edge he applied because it matches the art and because it strengthens the rim; without it, the rim will get bent pretty easily.


Thanks for the tip about the rolled edges. I'll have to see if Mark will do that.

Hugh Knight wrote:
The handle is flat stock with a wrap of heavy leather. To me, this gives a far better grip than the tubular handles I have seen, and seems to match what some buckler art shows.


Does anyone have some examples of art showing leather-wrapped handles?



 Attachment: 60.45 KB
Talhoffer buckler by Armory Marek front.jpg
Talhoffer-style buckler by Armory Marek - front

 Attachment: 66.95 KB
Talhoffer buckler by Armory Marek back.jpg
Talhoffer-style buckler by Armory Marek - back

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Hugh Knight




Location: San Bernardino, CA
Joined: 26 Jan 2004
Reading list: 34 books

Posts: 739

PostPosted: Fri 03 Dec, 2010 3:11 pm    Post subject:         Reply with quote

Craig Shackleton wrote:
Hugh, that's a beautiful buckler. Does Greg sell them? The size looks good to me. I like an 11 inch diameter buckler when using a round one, because anything bigger hampers some of the techniques, at least a little.


Hi Craig,

Thank you very much. You'd have to ask Greg about that; as far as I know, he doesn't do production work at this time. If you send me a PM I will forward your e-mail address to him if you would like me to.

For my part, I think even the 11" round buckler's are a bit big. This one is less of a problem because of the shape, but my students all use 9" round bucklers and they work just fine. A bigger buckler isn't really necessary for early-period (NB: I don't understand I.33, so these comments don't include that source) buckler play because the buckler is never really used to block attacks, but only to create a zone defense (which is why the buckler is held so far from the body in guard), to protect the sword hand and to pin the opponent's sword or hand. That changes by Silver's day because the basket hilts protect the sword hand then, allowing the user to make active blocks with the buckler, but in Talhoffer, Lignitzer, and Kal there are no blocks with the buckler, just protection and pinning actions. Truthfully, a buckler is more of a gauntlet than a shield.

Regards,
Hugh
www.schlachtschule.org
View user's profile Send private message Visit poster's website Yahoo Messenger
Mark T




PostPosted: Fri 03 Dec, 2010 8:34 pm    Post subject:         Reply with quote

Hugh: I forgot to say thanks for having posted pics of yours on your original thread ... seeing those helped me explore options for getting my own made up.

Does anyone else have photos of a Talhoffer-style buckler they'd like to share, or experience in using one?

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Hugh Knight




Location: San Bernardino, CA
Joined: 26 Jan 2004
Reading list: 34 books

Posts: 739

PostPosted: Fri 03 Dec, 2010 9:58 pm    Post subject:         Reply with quote

Mark T wrote:
Hugh: I forgot to say thanks for having posted pics of yours on your original thread ... seeing those helped me explore options for getting my own made up.


Oh, you're welcome. To be honest, I'd forgotten that I'd posted the picture before, so I thought I was showing something new here.

Incidentally, this buckler is a real joy to practice with. The way the tips are shaped makes it ideal for catching sword and hands in some of Talhoffer's techniques.

Regards,
Hugh
www.schlachtschule.org
View user's profile Send private message Visit poster's website Yahoo Messenger
Mark T




PostPosted: Fri 03 Dec, 2010 11:47 pm    Post subject:         Reply with quote

Hugh Knight wrote:
Incidentally, this buckler is a real joy to practice with. The way the tips are shaped makes it ideal for catching sword and hands in some of Talhoffer's techniques.


That's what interests me most in commissioning one and experimenting with it, and this interest was in turn inspired by Bill Bagwell and James Keating's reserach into 'devil horns' guards and blade catchers in Bowie knives ... which, in turn, draw on the downturned guards of Renaissance parry daggers, and possibly even the Medieval 'Aunlaz' and 'antennae' guards before them ... such a simple design concept, but incredibly effective on a knife, so why not on a buckler?

That's what initially drew me to Mark Vicker's design - although I take your point about the need for rolled edges to prevent damage. I've also seen some discussion of the ability of rolled edges to trap sword tips; I'd be interested to hear if anyone has found this to be effective enough to actually use it in practice reliably.

While I'm beginning to prefer the lines of the Armory Marek buckler overall out of the three styles above - he just really seems to capture the 'three-dimensionality' of the images in Talhoffer - the example on his site doesn't have the curved tips, which seems like a key feature of this design ...

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Hugh Knight




Location: San Bernardino, CA
Joined: 26 Jan 2004
Reading list: 34 books

Posts: 739

PostPosted: Sat 04 Dec, 2010 1:20 am    Post subject:         Reply with quote

Mark T wrote:
That's what interests me most in commissioning one and experimenting with it, and this interest was in turn inspired by Bill Bagwell and James Keating's reserach into 'devil horns' guards and blade catchers in Bowie knives ... which, in turn, draw on the downturned guards of Renaissance parry daggers, and possibly even the Medieval 'Aunlaz' and 'antennae' guards before them ... such a simple design concept, but incredibly effective on a knife, so why not on a buckler?

That's what initially drew me to Mark Vicker's design - although I take your point about the need for rolled edges to prevent damage. I've also seen some discussion of the ability of rolled edges to trap sword tips; I'd be interested to hear if anyone has found this to be effective enough to actually use it in practice reliably.


None of the sources we have discuss or even hint at things like this. And, again, remember that the sources we have show no evidence for active blocking with bucklers.

Quote:
While I'm beginning to prefer the lines of the Armory Marek buckler overall out of the three styles above - he just really seems to capture the 'three-dimensionality' of the images in Talhoffer - the example on his site doesn't have the curved tips, which seems like a key feature of this design ...


Not only that, but his grip is perpendicular to the correct orientation, which should be along the long axis.

Regards,
Hugh
www.schlachtschule.org
View user's profile Send private message Visit poster's website Yahoo Messenger
Mark T




PostPosted: Sat 04 Dec, 2010 3:08 pm    Post subject:         Reply with quote

Here's another pic from the thread about Hugh's buckler which gives a different sense of its shape, as well as the curve on the tips that we're discussing:


 Attachment: 169.58 KB
Talhoffer-buckler-made-by-Greg-Wosnak-posted-by-Hugh-Knight-on-myA-23.06.09.gif


Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Bradley M Cramer Jr




Location: Pensacola
Joined: 04 Feb 2010

Posts: 1

PostPosted: Fri 11 Feb, 2011 3:19 pm    Post subject: buckler         Reply with quote

does anyone sell these?
View user's profile Send private message Send e-mail
Craig Shackleton




Location: Ottawa, Canada
Joined: 20 Apr 2004
Likes: 1 page

Posts: 307

PostPosted: Fri 11 Feb, 2011 5:32 pm    Post subject:         Reply with quote

I have now ordered one of these from Armory Marek, asking them to align the handle correctly, but I haven't received it yet. I ordered a few things from them, and I'll give a mini review once I have them.
Ottawa Swordplay
View user's profile Send private message Visit poster's website
Nathan Robinson
myArmoury Admin


myArmoury Admin

PostPosted: Fri 11 Feb, 2011 5:45 pm    Post subject: Re: buckler         Reply with quote

Bradley M Cramer Jr wrote:
does anyone sell these?


This topic discusses options for having one made.

.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
View user's profile Send private message Send e-mail Visit poster's website
Mark T




PostPosted: Sat 12 Feb, 2011 2:10 am    Post subject:         Reply with quote

Craig Shackleton wrote:
I have now ordered one of these from Armory Marek, asking them to align the handle correctly ... and I'll give a mini review once I have them.


Hi Craig,

Great! Please do ... I haven't ordered one yet, as some other projects came along - but am looking forward to hearing what you think about it.

Cheers!

Chief Librarian/Curator, Isaac Leibowitz Librarmoury

Schallern sind sehr sexy!
View user's profile Send private message
Craig Shackleton




Location: Ottawa, Canada
Joined: 20 Apr 2004
Likes: 1 page

Posts: 307

PostPosted: Wed 13 Apr, 2011 9:28 am    Post subject:         Reply with quote

I received my buckler (along with two messers and a longsword) from armory marek today.

They have posted new pictures on their website, which show my specific buckler. I'm guessing that based on the image I sent them from Talhoffer, they realized that their old grip style was incorrect.



The buckler is flatter than I expected. The crease lines are really just that; crease lines with no real depth. The upside is that the boss gives the impression of a point, but is not actually pointy. I won't be poking anyone with the point when I shieldknock.

It is also a little on the heavy side for my preference, but not outrageous, at 2 lb, 13 oz.. Still lighter than the lightest GDFB manhole cover/12 inch buckler. One reason it is heavy is that instead of rolling the edges, they welded on light round bar stock (~4mm).

The grip is just flat stock which I will need to wrap with something (or I may just replace it with a wooden grip).

The finish is good, service was great, and I am happy with the transaction.

As an aside, the other items I received are beautifully made, but slightly overbuilt. Since they arrived less than an hour ago, I have not played with them in earnest.

Ottawa Swordplay
View user's profile Send private message Visit poster's website
Simon G.




Location: Lyons, France
Joined: 02 Jun 2008

Spotlight topics: 1
Posts: 238

PostPosted: Wed 13 Apr, 2011 10:38 am    Post subject:         Reply with quote

Craig,

Congrats on your new buckler and other items. This buckler still looks very good if indeed a bit flat. I think if I ever get past my obsessing love of two-handed weapons and order a buckler, I'll get the same as yours.

I too recieved items from Armory Marek a little while ago and had the same impression as you - pretty but a bit overbuilt. I would be very interested in knowing which items you got and what's your impression of them, as I'll probably order again from Marek in the future. And I really need to get around to writing a review of the items I already bought...
View user's profile Send private message Send e-mail


Display posts from previous:   
Forum Index > Historical Arms Talk > Custom Talhoffer-style buckler
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum