Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Need help with cleaning rust off weapons and armor Reply to topic
This is a standard topic  
Author Message
Jonathan S




Location: Peterson AFB, CO
Joined: 08 Nov 2006

Posts: 4

PostPosted: Thu 09 Nov, 2006 6:40 am    Post subject: Need help with cleaning rust off weapons and armor         Reply with quote

Hey all I am kind of new to this forum but I was thrilled to actually find something out here with stuff I enjoy. Especially one I can access past all the firewalls and blocks at work ha. But anyhow I have recently gotten back my sword and armor which I havent had with me for about a year now and rust has built up on it pretty well. I am not sure on the best way to get rid of it and clean the armor. Protect it possibly from rusting to badly in future events. Any of your help and assistance on the best way to go about all this would be greatly appreciated. Also another thing is I am thinking of sharpening a sword and I would like to know the best thing to use to sharpen it. I dont know proper oils and tools to use to do it. Once again I really appreciate any help and look forward to hearing back from everyone. Thank you.
View user's profile Send private message
Bruno Giordan





Joined: 28 Sep 2005

Spotlight topics: 1
Posts: 919

PostPosted: Thu 09 Nov, 2006 7:10 am    Post subject: Re: Need help with cleaning rust off weapons and armor         Reply with quote

Jonathan S wrote:
Hey all I am kind of new to this forum but I was thrilled to actually find something out here with stuff I enjoy. Especially one I can access past all the firewalls and blocks at work ha. But anyhow I have recently gotten back my sword and armor which I havent had with me for about a year now and rust has built up on it pretty well. I am not sure on the best way to get rid of it and clean the armor. Protect it possibly from rusting to badly in future events. Any of your help and assistance on the best way to go about all this would be greatly appreciated. Also another thing is I am thinking of sharpening a sword and I would like to know the best thing to use to sharpen it. I dont know proper oils and tools to use to do it. Once again I really appreciate any help and look forward to hearing back from everyone. Thank you.


Olive oil and steel wool.

Pumice powder would be fantastic for finishing but I don't know if it is available in USA.

It is used by furniture restorers

Use some furniture wax to protect your armor, it will keep a lot.

FIREWALLS

My workplace firewall (with privoxy) classifies myArmoury.com as a dangerous website (arms and explosives)

I don't know who is the bigot that compiles the lists but he must be a really idiotic man.
View user's profile Send private message
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Sat 11 Nov, 2006 11:15 am    Post subject: Re: Need help with cleaning rust off weapons and armor         Reply with quote

Bruno Giordan wrote:
Jonathan S wrote:
Hey all I am kind of new to this forum but I was thrilled to actually find something out here with stuff I enjoy. Especially one I can access past all the firewalls and blocks at work ha. .
FIREWALLS

My workplace firewall ... classifies myArmoury.com as a dangerous website (arms and explosives) ....
My situation also. I can't even glance at the site during lunch, after hours, etc., when I'm working "for free". Nor even in the evenings when I am travelling on business, unless I am in a location with it's own web access.

Jonathan S wrote:
... But anyhow I have recently gotten back my sword and armor which I havent had with me for about a year now and rust has built up on it pretty well. I am not sure on the best way to get rid of it and clean the armor. Protect it possibly from rusting to badly in future events....
In addition to Bruno's comments, you will find several threads in the forum regarding rust and maintenance if you use the search function. Also, in the Features, there is a useful article on maintenance: Care and Maintenance of the Modern Replica

"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message
Thomas Watt




Location: Metrowest Boston
Joined: 19 Sep 2006
Reading list: 7 books

Posts: 159

PostPosted: Sat 11 Nov, 2006 3:00 pm    Post subject:         Reply with quote

Not to hijack the questioner's thread, but how about either automotive wax or carnuba floor wax for maintaining the blade?

And as to firewalls... yeah, I get that too. This site is blocked from my work access so I can only drop in during off-hours.

Have 11 swords, 2 dirks, half a dozen tomahawks and 2 Jeeps - seem to be a magnet for more of all.
View user's profile Send private message
Hugo Voisine





Joined: 25 Feb 2006
Reading list: 7 books

Posts: 336

PostPosted: Sat 11 Nov, 2006 3:22 pm    Post subject:         Reply with quote

Quote:
Not to hijack the questioner's thread, but how about either automotive wax or carnuba floor wax for maintaining the blade?


I've been using for Turtle Wax on several of my "working blades" (the ones I use often) for around one year now and it worked great. I found it great for cleaning the blades after sparring or after a cutting session...
View user's profile Send private message
Andy Biggers




Location: Barrie, Ontario, Canada
Joined: 11 Aug 2006

Posts: 22

PostPosted: Mon 13 Nov, 2006 9:05 am    Post subject:         Reply with quote

Hi,

I would like to comment on the portion of your question concerning the sharpening of one of your swords. If your sword is an expensive high quality piece and you do not have any prior experience in sharpening or honing blades, I would strongly urge you to have the piece sharpened by an experienced bladesmith rather than tackling the job on your own. This is even more especially true is the blade in question is relatively long. I have seen more swords ruined by botched do-it-yourself sharpening jobs than by any other means save for damage caused by abusive use.

Sharpening is a real specialty -- particularly on long blades with complex profiles. No matter what you decide, do not even contemplate using a bench or disk grinder -- your will produce a hidious edge and likely destroy the heat treatment of the blade in the process. If the edge of the sword in question already has a "near" edge on it -- that is to say, a formed edge that simply needs to be brought to a good edge, wet honing with a series of increasingly fine stones is probably the way to go. If moderate to considerable stock removal is required to put a good edge on the blade, it may well require wet grinding then honing -- but again, even if you have the correct equipment, I would not recommend your tackling the job on your own.

Gain say who dare!
View user's profile Send private message
P Ballou




Location: N California
Joined: 05 Oct 2006

Posts: 28

PostPosted: Mon 13 Nov, 2006 10:03 am    Post subject:         Reply with quote

I like to use Break Free's CLP. This is a multipurpose fluid that Cleans, Lubricates, and Protects ("CLP"). According to Break Free, it is used by the US Military to maintain its weaponry, exceeding MIL-L-63460 requirements. It is also the oil "strongly recommended" by Albion Swords Ltd for regular maintenance of their products. In California, we can buy it at Big 5 Sporting Goods, but I don't know about other areas. It comes in a squirt bottle or spray can.
View user's profile Send private message
Allen Andrews




Location: Maine USA
Joined: 17 Oct 2006
Reading list: 5 books

Posts: 305

PostPosted: Mon 13 Nov, 2006 10:47 am    Post subject:         Reply with quote

Funny you should mention that, I started using Breakfree CLP back in the early 80's as a Gunner's Mate in the USCG. I continue to use it in many applications, one of which is keeping my non-stainless cutlery rust free Happy
View user's profile Send private message
Michal Plezia
Industry Professional



Location: Poland
Joined: 07 Oct 2005
Likes: 2 pages
Reading list: 1 book

Posts: 585

PostPosted: Mon 13 Nov, 2006 2:55 pm    Post subject:         Reply with quote

For long term storage I use synthetic engine oil(of course new-not from the engine Wink ) To remove rust I put some oil on the loofah/coarse spoonge designed for washing very dirty dishes.And it is working.
www.elchon.com

Polish Guild of Knifemakers

The sword is a weapon for killing, the art of the sword is the art of killing. No matter what fancy words you use or what titles you put to
it that is the only truth.
View user's profile Send private message Visit poster's website
Patrick Kelly




Location: Wichita, Kansas
Joined: 17 Aug 2003
Reading list: 42 books

Spotlight topics: 2
Posts: 5,739

PostPosted: Mon 13 Nov, 2006 3:00 pm    Post subject:         Reply with quote

I'll recommend Renaissance Wax since someone undoubtedly will before long. It's supposed to be the miracle stuff of the A&A world. Museums use it quite a bit. I've used it on a helmet that sees little handling and a lot of sitting on the shelf and it requires litle to no attention. I use an oil called Ballistol, applied with a rag. It may require a little more effort but it is cheaper and results in a nice seasoned patina over time, something you won't get with a sealer like wax. I've also used Breakfree to good effect. That's even cheaper for me since I can get it in bulk from my agency.

There's nothing wrong with firewalls at work. Afterall, some employers actually expect their employees to work for their paychecks. Old fashioned I know but old attitudes die hard. Wink
View user's profile Send private message AIM Address
Bruno Giordan





Joined: 28 Sep 2005

Spotlight topics: 1
Posts: 919

PostPosted: Tue 14 Nov, 2006 10:03 am    Post subject:         Reply with quote

Patrick Kelly wrote:
I'll recommend Renaissance Wax since someone undoubtedly will before long. It's supposed to be the miracle stuff of the A&A world. Museums use it quite a bit. I've used it on a helmet that sees little handling and a lot of sitting on the shelf and it requires litle to no attention. I use an oil called Ballistol, applied with a rag. It may require a little more effort but it is cheaper and results in a nice seasoned patina over time, something you won't get with a sealer like wax. I've also used Breakfree to good effect. That's even cheaper for me since I can get it in bulk from my agency.

There's nothing wrong with firewalls at work. Afterall, some employers actually expect their employees to work for their paychecks. Old fashioned I know but old attitudes die hard. Wink


Well, it depends on wether you are using the net while you are active or when you are in a legitimate pause.

I work for a cultural instituton, so access to websites treating historical topics is considered normal, often it is a good thing simply to scour the web in order to discover interesting websites for our clients.

For comemrcial companies, obviously none should expect to be given a pay for pursuing his own hobby while at work, but there are legitimate pauses that most people exploit to read newspapers or simply to rest.


What is strange is that this website is classified as an extremist one , this blocking lists are shared also with communities like high schools, universities and possibly parental control apps.

This classification is simply outrageus, being also outrageus the existenc of political censorhip in what are considered mature democracies.


[/b]
View user's profile Send private message
Chad Arnow
myArmoury Team


myArmoury Team

PostPosted: Tue 14 Nov, 2006 10:08 am    Post subject:         Reply with quote

Please don't let this become a political discussion. Please keep your posts on-topic.
Happy

ChadA

http://chadarnow.com/
View user's profile Send private message Send e-mail Visit poster's website


Display posts from previous:   
Forum Index > Off-topic Talk > Need help with cleaning rust off weapons and armor
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum