Author |
Message |
Leo Todeschini
Industry Professional
|
Posted: Fri 03 Dec, 2010 3:20 pm Post subject: Tods Stuff does stocking fillers |
|
|
Hi All,
Well the holiday season is here again and so I will do a mamoth picture post of available items and maybe something can get on your wish list.
Obviously these pictures cannot really show detail, but if there is something you are interested in please email me on tod@todsstuff.co.uk and I will send you better pictures.
All prices are given in £Sterling; for US Dollar price multiply by 1.6 so £1 = $1.60, for Euro price multiply by 1.25, so £1 = 1.25 Euro. I accept Paypal.
Shipping will be £8 UK, £12 Europe, £15 US/Canada £18 Rest of World.
The picture called rondels, from left to right they are £180,220,250,170,170,170,170. Bottom rondel is 170
The picture called Bollocks, all are £120 except the triple which is £240
The picture called mil; top is 330, left top to bottom left 300,380,240. Top right to bottom right 210, 240, 200
The picture called eating. Top row from left to right 135, 85, 200, 85, 85, 80. bottom row from left to right 135, 95, 80, 70, 70, 70
The picture called cooks; Top row from left to right 250, 190, 240. bottom row from left to right 260, 250, 850
I hope something is of interest
Regards
Tod
Attachment: 190.59 KB
Attachment: 187.85 KB
Attachment: 166.14 KB
Attachment: 191.07 KB
Attachment: 182.55 KB
www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
|
|
|
|
Leo Todeschini
Industry Professional
|
Posted: Fri 03 Dec, 2010 3:35 pm Post subject: |
|
|
And the last couple of bits.
A Bec I saw in the Herman Historica catalogue and had to make and whilst I was carving the wax a customer suggested it would be nice for a linstock, so I made one of those as well.
On the Bec the blade is EN9 modified, which is about .75% carbon and the fist is bronze and the shaft is ash that has been blackened. £250
On the linstock the fist is bronze, the studs brass and the shaft ash. £180
Postage on these items will be £20UK, $60, 45 Euro
Thanks
Tod
Attachment: 172.24 KB
Attachment: 175.96 KB
Attachment: 169.72 KB
www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Jeremy V. Krause
|
Posted: Fri 03 Dec, 2010 5:17 pm Post subject: |
|
|
So tempting. . . .
But a quick question Tod, or for those who may know the answer to said inquiry.
Does your makers mark shaped like like a segmented circle denote the English Cutler line? Some pices have this and some do not i.e. my custom pieces. Is this your universal practice?
Again Tod, so many of this pieces show off your skill and attention to detail. BRAVO!
|
|
|
|
Mark T
|
Posted: Fri 03 Dec, 2010 5:17 pm Post subject: |
|
|
Tod: That Bauernwehr and by-knife is just gorgeous! I wonder if I started believing in Santa again if he'd become real ... does it work like that?
Chief Librarian/Curator, Isaac Leibowitz Librarmoury
Schallern sind sehr sexy!
|
|
|
|
Chad Arnow
myArmoury Team
|
Posted: Fri 03 Dec, 2010 8:21 pm Post subject: |
|
|
Jeremy V. Krause wrote: | Does your makers mark shaped like like a segmented circle denote the English Cutler line? Some pices have this and some do not i.e. my custom pieces. Is this your universal practice?
|
Not Tod, but the EC line does bear this mark, as do some of his custom pieces (but not all in my experience).
ChadA
http://chadarnow.com/
|
|
|
|
Matt Corbin
|
Posted: Fri 03 Dec, 2010 8:27 pm Post subject: |
|
|
Oh the incredible pain of having all my expendable income tied up in a custom sword order!!! The big seax in the top picture is absolutely taunting me
I really hope someone buys that one soon so I can maintain some pretense of willpower.
“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Matt Corbin
|
Posted: Fri 03 Dec, 2010 8:46 pm Post subject: |
|
|
Nathan Robinson wrote: | Matt Corbin wrote: | Oh the incredible pain of having all my expendable income tied up in a custom sword order!!! The big seax in the top picture is absolutely taunting me
I really hope someone buys that one soon so I can maintain some pretense of willpower. |
Want a better look? Check out this topic. |
Are you trying to torment me?
“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
|
|
|
|
Joe Fults
|
Posted: Sat 04 Dec, 2010 9:17 am Post subject: |
|
|
Thankfully I was able to get one of Tod's Bauernwehr and by-knife sets second hand before these posted up so I'm much better able to delay the gratification that buying one of these would bring. In an effort not to help everyone else struggling with temptation, I will say that the work is better in person than in the photos. Always a small detail or three that you just don't capture or notice in a picture.
In my experience the larger items are very substantial pieces that are well crafted but not machine perfect, which is nice. You can tell its something hand worked by a person with skill who cares about what he's doing. If you're on the fence about one of these, you better buy it before somebody else does!
"The goal shouldn’t be to avoid being evil; it should be to actively do good." - Danah Boyd
Last edited by Joe Fults on Sat 04 Dec, 2010 9:10 pm; edited 1 time in total
|
|
|
|
Johan Gemvik
|
Posted: Sat 04 Dec, 2010 9:49 am Post subject: |
|
|
Very nice as always.
"The Dwarf sees farther than the Giant when he has the giant's shoulder to mount on" -Coleridge
|
|
|
|
Leo Todeschini
Industry Professional
|
Posted: Sat 04 Dec, 2010 12:08 pm Post subject: |
|
|
Thanks for your support and glad I can tempt some of you!
Jeremy V Krause wrote Quote: | Does your makers mark shaped like like a segmented circle denote the English Cutler line? Some pices have this and some do not i.e. my custom pieces. Is this your universal practice?
|
For Tods Stuff pieces my practice is as follows.
My personal mark is a very medieval one and is the circle cut into 4. I should of course apply this to every piece that leaves my shop but somehow this does not always happen. Original Viking age pieces may have a makers name or motto, but not a mark and I have never got round to getting a viking age name, so I don't mark them at all.
Norman era stuff from 1066 to about 1230 were usually not marked, so I don't mark these either.
1230 through to 1650 I try to mark, but sometimes I forget in the heat of the moment. Most medieval and rennaissance pieces have my mark, but not all.
Post 1650 the style of mark changes again to a more text based form and I do not have a mark for this, so generally I do not mark items post 1650.
Pieces I master and use for casting will, if appropriate, carry my mark, so for instance the bec shown above carries my mark, while the Medieval mace shown on the English cutler pages did not seem appropriate to carry a mark, so I have not applied one.
Perhaps it was a mistake, but I use my same mark for English Cutler as for Tods Stuff and I probably should differentiate between the two however historically I have not done this, so both my custom work as Tods Stuff and my standard offering as The English Cutler carry the same mark. All English cutler knives, regardless of era carry my mark.
I hope this clarifies things a little.
Regards
Tod
www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
|
|
|
|
Philip Melhop
|
Posted: Sun 05 Dec, 2010 5:05 am Post subject: |
|
|
Aha! the 3rd sax down , on the right now lives in my knife box
Super work from Tod as always.
Phil
|
|
|
|
Jeremy V. Krause
|
Posted: Sun 05 Dec, 2010 11:18 am Post subject: |
|
|
Philip Melhop wrote: | Aha! the 3rd sax down , on the right now lives in my knife box
Super work from Tod as always.
Phil |
Congratulations! THat's a very handsome seax. Tod does great work with these.
|
|
|
|
Abe Zettek
|
Posted: Fri 04 Feb, 2011 1:23 pm Post subject: |
|
|
Since shear steel has been popping up in the forums lately, I thought I'd better make a comment here despite the fact that I have no pictures yet.
The top seax in the first picture is now in my possession. As always seems to be the case with Tod's work, it is really first class quality! The blade is shear steel made by Owen Bush, and I could not be happier with it. It has a more traditional quality to it, and looks fantastic, with enough 'figure' to just make it noticeable that it is made of shear steel. The copper and silver inlay done by Tod (I presume?) adds another beautiful element to the piece, although I might be biased since wire inlaying is my absolute favorite feature of ancient arms.
The handle of boxwood is simple, but well formed and proportioned. It feels good to hold, and has a bit of 'burl-looking' figure to it in some places. The blade appears to be strongly epoxied into place, and has held up to moderate use thus far with zero issues.
As good as the seax itself is, the sheath is quite something to behold! The brown leather has nice incised patterns along its length that add just the right amount of visual detail. These lines are complemented by the simple stamping along the bronze edge. The seax fits perfectly inside - not too tight, not too loose. The bronze rings for suspension are nicely done, and now hold two leather loops for belt attachment.
The piece has taken some long treks through frigid temperatures and blasting snow since I've had it, and it is still as good as new. I've wanted a seax from Tod's stuff for a while now and have admired Mr. Bush's blades, and so am privileged to have had the opportunity to finally purchase such a fine piece from two top-notch craftsmen.
|
|
|
|
Jeremy V. Krause
|
Posted: Fri 04 Feb, 2011 2:00 pm Post subject: |
|
|
Hi Abe,
So yours is the one with the three twisted inlayed lines? That's a really attractive seax! I really like the long handle length.
I share your love of inlay on historical pieces.
|
|
|
|
Abe Zettek
|
Posted: Wed 09 Feb, 2011 3:45 pm Post subject: |
|
|
Hi Jeremy, yes, mine is that one. A simple, but really nice inlay. The handle is something I like too - it is indeed very long, but gives a good feel. I find it allows for a wider range of grips, so if you need to chop for whatever reason, holding it further back makes the job easier, while finer tasks are best done while holding nearer the blade.
|
|
|
|
|