| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term. Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
Author |
Message |
Michael Olsen
|
Posted: Sat 23 Dec, 2006 4:02 pm Post subject: Federschwerter Lengths |
|
|
During a few recent looks into Meyer's fechtbuch, I became inspired to find as much statistical information on as many extant examples of the "federschwerter" as possible. I have browsed around the web, checked some trusted websites, looked in a few forums, and PMed a couple of individuals on these boards and came up with surprisingly little solid information. My suspicion that there are relatively few carefully guarded "federschwerter" around seems to have been confirmed.
If anyone has any sourced information on the length of historic (not modern reproduction) federschwerter, please let me know. Most importantly, please list:
the source of the information
any specific identifying information (serial #'s, etc)
any measurements
Hopefully this thread will provide a collective insight into what seems to be a historically common but recently rare historical training tool. Thanks.
|
|
|
|
David Welch
|
Posted: Sat 23 Dec, 2006 7:42 pm Post subject: |
|
|
Derek Wassom has some measurements from a swiss museum here:
http://www.thearma.org/spotlight/swiss-swords.html
And I have one made based off of the measurements from one in Poland from a group of swords Jake Norwood had commisioned, but it is on loan at the moment so I can't give you the exact measurements. They are basically made to the size of the sword you are wanting to train to use. Mine are "longsword" sized.
"A sword never kills anybody; it is a tool in the killer's hand."
Lucius Annaeus Seneca 4BC-65AD
|
|
|
|
Michael Olsen
|
Posted: Sat 23 Dec, 2006 8:20 pm Post subject: |
|
|
David Welch wrote: | Derek Wassom has some measurements from a swiss museum here:
http://www.thearma.org/spotlight/swiss-swords.html
And I have one made based off of the measurements from one in Poland from a group of swords Jake Norwood had commisioned, but it is on loan at the moment so I can't give you the exact measurements. They are basically made to the size of the sword you are wanting to train to use. Mine are "longsword" sized. |
I am familiar with that one, and the one from which Jake had commissioned his. In fact, that is the only information I've been able to locate. Thanks for the info though - this reminded me to bookmark it.
I understand that they can be made to size, but I'm interested in finding out the basic physical properties of the historic tools.
|
|
|
|
Craig Peters
|
Posted: Mon 25 Dec, 2006 9:07 am Post subject: |
|
|
I saw an antique Federschwerter recently in a museum in Darmstadt, south of Frankfurt am Main. I didn't take any measurements of it, but I do have a photo. Theoretically, with some clever mathematics, you might be able to figure out how long it was. I noticed too that it had an extreme distal taper, starting at about 1 cm thick near the ricasso, which appeared to widen about a milimeter or two over the next inch or so, and then tapered gradually so that by the time one reached the "point" of the sword it was about as thin as the edge on a regular sword. Since I didn't do precision measurements on it, I can't be more precise than that, and there may have been other subtle changes in the taper that I missed. Nevertheless, it gives you a general idea of what the blade is like.
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|