Author |
Message |
Mike Fletcher
Location: Auburn, CA USA Joined: 21 Aug 2003
Posts: 102
|
Posted: Fri 05 Dec, 2003 10:01 pm Post subject: |
|
|
I think it would also be nice to see customization options offered (engraving, inlay, bronze guard/pommel, etc.) as well as an expanded choice of standard grip colors.
Regards,
Mike
|
|
|
|
David Stokes
|
Posted: Fri 05 Dec, 2003 10:41 pm Post subject: |
|
|
Nathan Robinson wrote: | David Stokes wrote: | They wouldnt be under $1,000, but it would be interesting to see another quality company have a swing at it, especially a US company |
I admit my shortcomings on this topic, but I can't imagine a domestic company making a quality mounted US-made katana under $1,000 to compete with the Paul Chen/ Cold Steel/ Cicada Forge lines. |
Thats just my point. All of the albion mark swords are under a grand........... if they did production katanas, they would have to bust that price niche
|
|
|
|
Nathan Robinson
myArmoury Admin
|
Posted: Fri 05 Dec, 2003 10:58 pm Post subject: |
|
|
David Stokes wrote: | Thats just my point. All of the albion mark swords are under a grand........... if they did production katanas, they would have to bust that price niche |
Yeah, we're on the same page.
By the way, there will be Albion Mark NextGen swords costing over a grand. The price points are in the $650-$1,200 range.
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
|
|
|
|
Patrick Kelly
|
Posted: Fri 05 Dec, 2003 11:19 pm Post subject: |
|
|
I don't know if it would be a wise move.
It seems that Albion has more than enough on their plate at the moment. Throwing a dramatically different design like a katana in the mix would really slow things down, on the developmental side.
"In valor there is hope.".................. Tacitus
|
|
|
|
Brian M
Location: Austin, TX Joined: 01 Oct 2003
Posts: 500
|
Posted: Sat 06 Dec, 2003 12:51 am Post subject: |
|
|
I've always believed in the maxim "dance with who brung ya." With PJ on board, Euro-Medieval looks to be Albion's forte and I think it will profit them to go with that for now. In my personal opinion, let the Japanese/Asian specialist concerns satisfy the market for Katanas and the Euro specialists satisfy the market for Euro swords.
Keeping withing the realm of Euro-Medieval-ish:
--"Norman" Type-X
--single-edged Viking ( I know from talking to Mr. McHugh that this is a distinct possibility.)
--Falchion
--Grosse Messer
--Two-handed Swiss sabre (might have to be a plainer version sans complex hilt)
--Type-XIX
Perhaps several "single-edged" sword models could be released as a group: the Viking, Falchion, Grosse Messer, and Sabre, although the Sabres verge on the "complex hilt" category.
Brian M
|
|
|
|
David Stokes
|
Posted: Sat 06 Dec, 2003 11:43 pm Post subject: |
|
|
Very true patrick.
There is the western sword market and the japanese. Both seem to be equally as large, even though the Japanese side arguably doesnt has as much drastic (note drastic) variations in design, size ect......... I do think that market is well taken care of with a large variety of choices to choose from.
BUT Albion is making those highlander katanas, so maybe if they did a few limited edtions using the blades, but giving them a traditional mount. ....... but that wouldnt really constitute a entire LINE of swords.
Personally, i would be interested in seeing more sabers like the now discontiued Trafalgar........ It says it will be redesigned so i cant WAIT to see what they do with it.
I always loved the blade on that sword, but the hilt never really did it for me, so i cant wait to see what they have in store for us on that one!
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Darwin Todd
|
Posted: Tue 09 Dec, 2003 7:03 am Post subject: I would like to see... |
|
|
a couple more Latene Celtic swords, some 6th or 7th century Anglo-Saxon styles and a nice falcatta, one with a fairly sharp point and a horsehead grip.
|
|
|
|
Shawn Duncanson
Location: Spokane Wa Joined: 05 Dec 2003
Posts: 49
|
Posted: Wed 10 Dec, 2003 1:22 am Post subject: Two handed Sabers |
|
|
Two handed sabres are what I would love to see. I eventually want to have a custom sabre of this type made, first I wish to learn more so I can design it historically. Also some one said single edged viking sword? I havent seen one of these other than a langsaex, but not a full sized sword. A Viking Backsword sounds interesting to me. I love single edged Euro Weapons of all types. Also some continental basket hilts broadswords and backswords would be awesome
Not all who wander are lost.
|
|
|
|
Joe Fults
|
Posted: Wed 10 Dec, 2003 8:12 am Post subject: |
|
|
I'm thinking that "What yould you like to see?" is only somewhat useful for Albion to see answered. "What would several of us actually buy?" is a better question to answer.
"The goal shouldn’t be to avoid being evil; it should be to actively do good." - Danah Boyd
|
|
|
|
Nathan Bell
|
Posted: Wed 10 Dec, 2003 11:12 am Post subject: |
|
|
Joe Fults wrote: | I'm thinking that "What yould you like to see?" is only somewhat useful for Albion to see answered. "What would several of us actually buy?" is a better question to answer. |
What I would like to see AND would buy in the PJ/NG line are some La Tene I and La Tene II swords, early iron age blades (Iberian, Irish, Roman, Greek), Halstatt swords, etc.
As I understand it though, these designs are slated somewhere "out there" on the design boards, all in due time
So I can't complain.
|
|
|
|
Brian M
Location: Austin, TX Joined: 01 Oct 2003
Posts: 500
|
Posted: Wed 10 Dec, 2003 12:20 pm Post subject: |
|
|
Joe, certainly that is a valid question. When I posted the topic, it was with the understanding in my mind that people should also consider commercial viability. Perhaps I should have been more explicit. Nevertheless, I think the suggestions have been for the most part constructive and have kept in mind "marketability."
Some of the swords mentioned I believe would have a market simply because no one makes one. The "Viking backsword," as someone called it, was quite a prominent type in period -- perhaps a quarter or more of all Viking swords known? Yet, AFAIK, there is not one reproduction. For Viking afficianados it would be a great opportunity.
Some types, like the Falchion and Grosse Messer, are represented in the reproduction market, but only by "low-price-point" companies like MRL and Cold Steel. Perhaps customers would pay to see these types done to a higher level of accuracy and quality.
Others, like the "knightly" or "Norman" type-X, are much-reproduced but nevertheless this is a model you probably want in the product line eventually. I, for one, would purchase such a model if Albion releases one.
Regards,
Brian M
|
|
|
|
David McElrea
|
Posted: Wed 10 Dec, 2003 2:30 pm Post subject: |
|
|
Nathan Bell wrote:
Quote: |
What I would like to see AND would buy in the PJ/NG line are some La Tene I and La Tene II swords, early iron age blades (Iberian, Irish, Roman, Greek), Halstatt swords, etc.
|
I've a Next Gen "Baron" on order, and (after the Solingen, which would be my next choice) am plenty enamoured with a couple of the other Next Gens-- but I have to agree, I would love to see Peter's and Albion's "Next Gen" take on the La Tene I and II swords.
I would also be thrilled to see an Iron Age Irish sword (a good one). Do you have a particular one in mind Nathan? I only ask because a lot of the swords we see from that period (in Ireland) are not overly inspiring-- but I'm only going on what I have seen.
David
|
|
|
|
Nathan Bell
|
Posted: Thu 11 Dec, 2003 3:53 pm Post subject: |
|
|
Quote: | I would also be thrilled to see an Iron Age Irish sword (a good one). Do you have a particular one in mind Nathan? I only ask because a lot of the swords we see from that period (in Ireland) are not overly inspiring-- but I'm only going on what I have seen.
David |
Well, though not large, the Lisnacrogher is quite impressive in shape and geometery and cross section.
I also find the double-fullered specimen pictured quite intriguing, both in terms of blade and the rather intricate remaining bronze fitting.
I'd like to see a very nicely done PJ/NG of one of these (preferably the Lisnacrogher) with around a 16 1/2"--18" blade length...
Attachment: 11.63 KB
Attachment: 92.23 KB
|
|
|
|
David McElrea
|
Posted: Thu 11 Dec, 2003 4:55 pm Post subject: |
|
|
Quote: | Well, though not large, the Lisnacrogher is quite impressive in shape and geometery and cross section.
I also find the double-fullered specimen pictured quite intriguing, both in terms of blade and the rather intricate remaining bronze fitting.
|
Thanks Nathan-- I wasn't familiar with the Lisnacrogher sword (just the scabbard).
In re: the double fullered one in the lower pic, any idea of its measurements? Angus McBride did an illustration of Cuchulainn (and sword) some years back, and I am wondering if that sword might have been his inspiration. I'll have to track it down again-- it is more than possible that I am not remembering correctly.
David
|
|
|
|
Nathan Bell
|
Posted: Sat 13 Dec, 2003 10:11 am Post subject: |
|
|
David McElreaIn wrote: | re: the double fullered one in the lower pic, any idea of its measurements? David |
As you probably know, all the Irish "swords" that are thought to date from La Tene era are quite, quite small---more like large dagger size.
IIRC the Ballinderry sword (double fullered one) has a blade length of about 45 cm, and the Lisnacrogher is around 36 cm blade length... I alsdo seem to recall the Ballinderry being one of the longest Irish La Tene "swords" found yet...
If I had a custom Lisnacrogher made (still sorta on the back burner), I would probably have the maker fudge a bit and stretch the blade length out to maybe 41-43 cm or so.
|
|
|
|
Gabriel Stevens
|
Posted: Fri 19 Dec, 2003 9:36 am Post subject: |
|
|
I just noticed a little tiny note at the bottom of the page that has PJs drawings for those new swords Albion's doing. A coming soon for a type XIV and a Claymore...where's mac at? hehe....
|
|
|
|
Douglas Peters
Location: Baton Rouge,LA Joined: 17 Nov 2003
Posts: 25
|
Posted: Sat 20 Dec, 2003 8:34 pm Post subject: |
|
|
I'd personally like to see a single-handed Scottish sword, as I don't see very many good ones on the market. Also maybe a civil war era or napoleonic style sabre.
|
|
|
|
J.G. Grubbs
|
Posted: Sat 20 Dec, 2003 9:33 pm Post subject: |
|
|
I have to agree with some of the previous posts..I'd like to see a LaTene II piece. I've admired that sword very much for a long time. The XVIIIa on page 191 of"Records" would be fantastic, but would probably fit better in the PJ Museum line.
Regards,
"The reputation of a thousand years may be determined by the conduct of one hour."
Samurai Proverb
James Grubbs
|
|
|
|
Mark Moore
|
Posted: Mon 22 Dec, 2003 5:40 pm Post subject: Albions Next Next Next Generation swords.... |
|
|
I know for a fact that they are coming out with a Claymore, as well as other big two-handers.....about time. FREEEEEEEDOOOOOOOOMMMM!!!
|
|
|
|
|