Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Were axes ever pattern-welded? Reply to topic
This is a standard topic  
Author Message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

PostPosted: Mon 20 Sep, 2021 8:09 am    Post subject: Were axes ever pattern-welded?         Reply with quote

I get it's a pretty basic question but I just don't have the information.

We know that many swords, knives, and spears pre- 1000 or so were pattern-welded by looking at historical pieces.

Is the same true for axes? If some were pattern-welded would only the edge be? Did it differ?
View user's profile Send private message
James Arlen Gillaspie
Industry Professional



Location: upstate NY
Joined: 10 Nov 2005

Posts: 587

PostPosted: Thu 23 Sep, 2021 10:01 am    Post subject:         Reply with quote

I have had a few roughly thousand year old Scandinavian fighting axe heads in my hands, but from the same find. They had a higher carbon piece wrapped around the edge, forge welded on, and quite noticeable even though covered with the classic thick black oxide typical of excavated pieces. Sorry, no photos; my clients don't like their stuff all over the internet. I wish they did, but not everyone is Wade Allen. Sad
jamesarlen.com
View user's profile Send private message Visit poster's website
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

PostPosted: Thu 23 Sep, 2021 11:54 am    Post subject:         Reply with quote

James Arlen Gillaspie wrote:
I have had a few roughly thousand year old Scandinavian fighting axe heads in my hands, but from the same find. They had a higher carbon piece wrapped around the edge, forge welded on, and quite noticeable even though covered with the classic thick black oxide typical of excavated pieces. Sorry, no photos; my clients don't like their stuff all over the internet. I wish they did, but not everyone is Wade Allen. Sad


It sounds like the pieces were forge-welded but not pattern-welded? I'm aware that nearly all viking era axes either had a complete iron body or an iron body with steely edge forge welded on.

Could you see the type of purposeful grain structure seen in migration and Viking era swords and spears?
View user's profile Send private message
Håvard Nygård




Location: Norway
Joined: 27 Oct 2019

Posts: 43

PostPosted: Fri 24 Sep, 2021 2:30 am    Post subject:         Reply with quote

According to Vikes book about viking weapons, the axes were never pattern welded. At least in the viking age.
The norse word "mal" translates to "pattern",are believed to be for pattern welded weapons, such as:

malaspjot = pattern welded spear
malasax = pattern welded sax
And many names for pattern welded swords are known, blodida and blodrefill. Which are believed to be the description of the patterns of the fuller of the blade. The blood that runs down on the pattern.

There were an distinction of weapons for war and tools for everyday use. The axe was predominantly made as a tool and used for war at necessity. The sax was a longer bladed weapon in early viking age and therefore has a deeper meaning to its continued pattern welded construction. The pattern welded weapons was mostly produced from 700-950 in the viking age. From 950 to 1100 the pattern welded blades were less and less common. The hilts and sockets of swords and spears were highly decorative but blades were of more simple construction.
The daneaxe is a weapon of war but never pattern welded as far as i know, and it was manufactured from ca year 950.

As to your question of if the edges are pattern welded, if would say no they never were. Of all the pictures and x-rays of weapons from research and museums all over Norway i have not seen pattern welding done on the edges on any weapon or tool.
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

PostPosted: Fri 24 Sep, 2021 6:51 am    Post subject:         Reply with quote

Håvard Nygård wrote:
According to Vikes book about viking weapons, the axes were never pattern welded. At least in the viking age.
The norse word "mal" translates to "pattern",are believed to be for pattern welded weapons, such as:

malaspjot = pattern welded spear
malasax = pattern welded sax
And many names for pattern welded swords are known, blodida and blodrefill. Which are believed to be the description of the patterns of the fuller of the blade. The blood that runs down on the pattern.

There were an distinction of weapons for war and tools for everyday use. The axe was predominantly made as a tool and used for war at necessity. The sax was a longer bladed weapon in early viking age and therefore has a deeper meaning to its continued pattern welded construction. The pattern welded weapons was mostly produced from 700-950 in the viking age. From 950 to 1100 the pattern welded blades were less and less common. The hilts and sockets of swords and spears were highly decorative but blades were of more simple construction.
The daneaxe is a weapon of war but never pattern welded as far as i know, and it was manufactured from ca year 950.

As to your question of if the edges are pattern welded, if would say no they never were. Of all the pictures and x-rays of weapons from research and museums all over Norway i have not seen pattern welding done on the edges on any weapon or tool.


fascinating. Thanks for your reply.

That's just the type of information I was looking for.
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Were axes ever pattern-welded?
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum