Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Castle Keep Petersen Type A sword Reply to topic
This is a standard topic  
Author Message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Tue 28 Jan, 2020 2:20 pm    Post subject: Castle Keep Petersen Type A sword         Reply with quote

So, my Castle Keep custom Petersen type A late migration period.early viking age sword is finished and shipping out soon! The blade is EN45 steel. The guard and pommel are stainless,and the upper pommel has silver wire inlaying the grooves. The grip and scabbard are wood bound in natural vegetable tanned leather. The scabbard bar is carved horn. The metrics I gave him are 28" long blade that is 45mm wide at the base and tapers down to 40mm wide at the tip. The thickness is 4mm thick at the base and tapers down to 3mm at the end of the fuller, then tapers down to 2mm before the tip. The sword is not an exact duplicate of any one piece but instead is based on the small end of the historical metrics for Geibig type one blades, as Dr. Petersen was very vague about the blades on this type except that they were some of the smallest viking age swords.


 Attachment: 233.66 KB
[ Download ]

 Attachment: 235.42 KB
[ Download ]

 Attachment: 220.43 KB
[ Download ]
View user's profile Send private message
J.D. Crawford




Location: Toronto
Joined: 25 Dec 2006

Spotlight topics: 1
Posts: 1,903

PostPosted: Wed 29 Jan, 2020 11:54 am    Post subject:         Reply with quote

Nice clean work there from Mr. Miller. Can't wait for my commission to come up.

You've got some interesting choices there: the natural leather grip and scabbard, small size, the relatively short fuller for an Oakeshott type X (Geibig type 1?).

I'm partial to bigger, later blade types myself.
View user's profile Send private message Visit poster's website
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Wed 29 Jan, 2020 12:00 pm    Post subject:         Reply with quote

Thanks. Yeah, it’s hardly a blade type you see very often. I was primarily drawn to the Type A being the oldest of the Petersen typology, but the small size and non pattern welded blades were a plus. I’m not a very big guy and having a pattern welded custom sword would have been way beyond feasible for my budget.
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

PostPosted: Wed 29 Jan, 2020 1:07 pm    Post subject:         Reply with quote

It's an attractive sword but why are the hilt components done in stainless steel?
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Wed 29 Jan, 2020 1:25 pm    Post subject:         Reply with quote

Jeremy V. Krause wrote:
It's an attractive sword but why are the hilt components done in stainless steel?


Because that’s what Rob works with for Hilts apparently. He said he didn’t have the setup for mild steel and adding it would have pushed the sword beyond my budget. Why, I don’t know but I know he uses stainless and bronze for hilts, and stainless was closer to the original iron than bronze. I’m not complaining although I thought it odd.
View user's profile Send private message
Henry R. Gower




Location: United States
Joined: 09 Dec 2013
Likes: 7 pages

Posts: 124

PostPosted: Wed 29 Jan, 2020 4:18 pm    Post subject: Petersen Type A Sword         Reply with quote

That leather color is very attractive and appealing, except that my experiences with similar leathers on antiquarian books tell me it is very easy to stain-even from oils in your hands. I would only want to handle that leather wearing white gloves, like they use in some museums and auction houses, for certain types of collectibles. Once light leather gets stained, I know of no way to bring it back to like new, which is a pity.
Best of luck, though,
Henry
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Fri 31 Jan, 2020 5:15 am    Post subject:         Reply with quote

Well I got word the sword arrived in America this morning so hopefully I’ll have some hands on thoughts on it real soon.
View user's profile Send private message
Lee O'Hagan




Location: Northamptonshire,England
Joined: 30 Sep 2003
Likes: 6 pages

Posts: 529

PostPosted: Fri 31 Jan, 2020 12:43 pm    Post subject:         Reply with quote

There was a thread a little while ago discussing how many makers use stainless of one type or another as a hilt material,
nothing unusual

having swords from this maker that have hilt materials from stainless to wrought iron to bronze to bone I don't doubt you will be happy with it,
I know a few of the fittings I have if done differently would have been well outside my budget at the time,
it looks a fine sword overall,
a healthy waxing to the leather will have it age naturally and it will look really nice,
excellent sword maker, Cool
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Fri 31 Jan, 2020 2:12 pm    Post subject:         Reply with quote

What’s really interesting is this manuscript page. Of all the colors to depict the scabbard and possibly the grip as, the artist chose this.


 Attachment: 82.17 KB
6D006438-E0CC-4FD6-96CB-7923010DA617.jpeg

View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Wed 05 Feb, 2020 7:32 am    Post subject:         Reply with quote

Well, it’s out for delivery now! I’ll have my own thoughts later today.
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Thu 06 Feb, 2020 10:24 am    Post subject:         Reply with quote

It is AWESOME!!!! It has a POB of around 7” but is very light, making a very aggressive sword.
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Thu 06 Feb, 2020 12:05 pm    Post subject:         Reply with quote

Imgur album linked here.

https://imgur.com/a/ILJ92lT
View user's profile Send private message
Tyler C.




Location: Canada
Joined: 20 Aug 2019
Reading list: 2 books

Posts: 160

PostPosted: Thu 06 Feb, 2020 3:37 pm    Post subject:         Reply with quote

Gorgeous blade. I personally love that hilt type (and Petersen type H and I).

Is the emblem inlaid in another metal or is it etched?
View user's profile Send private message
Erik Taliaferro




Location: Corpus Christi
Joined: 17 Dec 2019

Posts: 12

PostPosted: Thu 06 Feb, 2020 3:43 pm    Post subject:         Reply with quote

Tyler C. wrote:
Gorgeous blade. I personally love that hilt type (and Petersen type H and I).

Is the emblem inlaid in another metal or is it etched?


It’s etched. It has some red specks on the mark but they wiped right off with an oil cloth.
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Castle Keep Petersen Type A sword
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum