| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Graham Shearlaw, Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler (View All Donors) |
| Author |
Message |
|
Nicolás B.
Location: Spain Joined: 07 Oct 2018
Posts: 8
|
 Posted: Thu 18 Oct, 2018 7:51 am Post subject: wood options for scabbard |
 |
|
I wanted to use poplar but i cant find it anywhere near to me , which wood would be a good option for it? Is beech a good option ? i can get it pretty easy here where i live .
thanks.
PS: about acidity and that stuff , it will be used for a wooden sword so i dont think that matter at all right?
|
|
  |
 |
Mikko Kuusirati
|
| Posted: Thu 18 Oct, 2018 4:29 pm Post subject: |
|
|
Indeed, for a wooden sword it should make no difference.
You might want to use the same wood as for the sword, though, just to minimize the chances of them warping differently with fluctuations in temperature and moisture.
"And sin, young man, is when you treat people like things. Including yourself. That's what sin is."
— Terry Pratchett, Carpe Jugulum
|
|
|
|
|
Harry Marinakis
|
| Posted: Thu 18 Oct, 2018 7:10 pm Post subject: |
|
|
Based on analysis of extant wood scabbards, all of the following woods have been used for scabbard cores:
- Alder
- Ash
- Beech
- Birch
- Cherry
- Hazel
- Lime
- Maple
- Oak
- Poplar
- Willow
Poplar is soft but fibrous. It doesn't carve very cleanly and you get lots of tearout. Not a pleasant wood with which to work.
Personally I prefer woods that carve and chisel cleanly, like birch. The fact that you don't get all the tearout seems to make it easier to carve and shape, even if the wood is a lot harder than poplar.
|
|
|
|
|
Mikko Kuusirati
|
| Posted: Fri 19 Oct, 2018 4:17 am Post subject: |
|
|
| Harry Marinakis wrote: | | Personally I prefer woods that carve and chisel cleanly, like birch. The fact that you don't get all the tearout seems to make it easier to carve and shape, even if the wood is a lot harder than poplar. |
Good birch is lovely, yeah. Just keep your tools sharp and the hardness should be no problem (and, of course, once you're done carving it's purely a good thing).
"And sin, young man, is when you treat people like things. Including yourself. That's what sin is."
— Terry Pratchett, Carpe Jugulum
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2025 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic