Author |
Message |
Esa Etelävuori
|
Posted: Thu 10 Feb, 2005 5:27 am Post subject: |
|
|
Thanks Mac! I'm really enjoying your photos. I'm mainly focused on Oakeshott swords, but some pistols you phographed are a real joy. I think those are banned where I live (Finland), but still I can feel the goodness of them.
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Fri 11 Feb, 2005 12:32 pm Post subject: |
|
|
Jeff Millet has added the single 'MacLeod' pistol to the auction block, at antiqueguns.com !
http://www.antiqueguns.com/auction/item.cgi?jmillet/jmillet-48
Wish I had the extra $$ , Mac
This is an exquisite and high quality, fully-engraved Scottish officer\'s style \"Ram\'s-Horn\" butt flintlock pistol by the famed maker MacLeod. Circa 1820. It is engraved overall with thistles, flowers, scrolls, sunbursts, chevrons, dotted lines and infills; \"Mac Leod\" is hand-engraved on the lockplate (see photos). This pistol measures approximately 12 inches in overall length, with a 7-inch round barrel that becomes octagonal and flares toward the muzzle. Rear sight on a standing flange; no front sight as typical for the type. Note the rare, reverse-curved \"ram\'s-horn\" reinforced flint cock. Most screw heads are also engraved. Of all-steel construction, and completely original including the ball trigger, finely-formed touch hole pricker, and multi-stage turned ramrod. Complete with an original, nicely-shaped and decorated belt hook mounted on the left side. MacLeod is believed to have worked in the famed Scottish gunmaking capital of Doune (the location of his shop has not been confirmed by arms historians). His quality arms are marked with post-1813 Birmingham view and proof marks, doubtless to satisfy a more discerning Lowland clientele. In all, a very desirable piece.
Attachment: 121.87 KB
Attachment: 117.85 KB
Attachment: 119.51 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Wed 16 Feb, 2005 1:29 pm Post subject: |
|
|
My Vegas acquisitions arrived today .....
First up is my little Lynn Dawson piece .... all one once of 'er !
OL - 3 1/2"
BL - 2 " (including ricasso area)
BL - 1 1/2" (cutting area)
BT - 3/16" ( a hair over)
Grip length - 1 1/2"
Grip Thickness - 5/8" (including spine)
Weight - 1 oz.
* I believe Lynn said the grip was fossilized walrus bone but I'll have to double check that ?
I should probably ask her again what the steel mix is, too, as I've forgotten ?
Mac
Attachment: 45.55 KB
Attachment: 58.11 KB
Attachment: 63.6 KB
Attachment: 76.26 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Wed 16 Feb, 2005 1:41 pm Post subject: |
|
|
Next is the basket-hilted sabre I bought from Jeff Millet Co.
This piece, as mentioned above, turned out to be an E.B. Erickson hilt that was coupled with an antique blade !
The sword has a wonderful old look and feel to it and makes a great addition to my collection !
Mac
Weight - 1 lb. 15 1/4 oz.
OL - 34 3/4"
BL - 29 3/8"
BW - 1 1/8"
BT - 3/16"
POB - 3"
False edge - 8 3/4"
Fuller(s) width - 5/16"
Grip length - 4"
Pommel Dia. - 1 1/2"
Pommel height - 1 1/4"
Basket length - 4 1/2"
Basket height - 4"
Basket width - 3 7/8" (at widest point)
Saltire diamond plates - 1 1/4" x 1 1/8"
Attachment: 73.92 KB
Attachment: 69.66 KB
Attachment: 46.77 KB
Attachment: 93.6 KB
Attachment: 91.63 KB
Attachment: 81.52 KB
Attachment: 86.8 KB
Attachment: 104.29 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Stephen A. Fisher
Location: Kentucky USA Joined: 17 Oct 2003
Posts: 455
|
Posted: Wed 16 Feb, 2005 2:41 pm Post subject: |
|
|
Mac,
Thanks for posting those pics! I'd say you have another fine addition to your basket-hilt family.
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Wed 16 Feb, 2005 3:57 pm Post subject: |
|
|
Thanks, Stephen !
Here's a few more shots ....... Mac
Attachment: 107.04 KB
Attachment: 52.33 KB
Attachment: 70.37 KB
Attachment: 85.67 KB
Attachment: 69.58 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Patrick Kelly
|
Posted: Wed 16 Feb, 2005 4:16 pm Post subject: |
|
|
Love those hardwood floors Mac.
"In valor there is hope.".................. Tacitus
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Wed 16 Feb, 2005 4:39 pm Post subject: |
|
|
Patrick Kelly wrote: | Love those hardwood floors Mac. |
Hi Patrick
Actually they're softwood floors ;-)
The floors here are all wide-board pine with them big square head nails holding everything down !
Occationally I have to get out the hammer and bang a few down !
And the creeking always gives me that "easy country charm" feeling that John Denver sang so sweet about :-)
(my daughter will never be able to sneek out of this place at night ;-)
Mac
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
Last edited by Thomas McDonald on Wed 16 Feb, 2005 5:16 pm; edited 1 time in total
|
|
|
|
Steve Grisetti
|
Posted: Wed 16 Feb, 2005 4:40 pm Post subject: |
|
|
Thomas McDonald wrote: | Next is the basket-hilted sabre I bought from Jeff Millet Co.
This piece, as mentioned above, turned out to be an E.B. Erickson hilt that was coupled with an antique blade !
The sword has a wonderful old look and feel to it and makes a great addition to my collection !
Mac
Weight - 1 lb. 15 1/4 oz.
OL - 34 3/4"
BL - 29 3/8"
BW - 1 1/8"
BT - 3/16"
POB - 3"
False edge - 8 3/4"
Fuller(s) width - 5/16"
Grip length - 4"
Pommel Dia. - 1 1/2"
Pommel height - 1 1/4"
Basket length - 4 1/2"
Basket height - 4"
Basket width - 3 7/8" (at widest point)
Saltire diamond plates - 1 1/4" x 1 1/8" |
Mac,
According to the numbers, the weight seems light, and POB close. How does your new "baby" feel in the hand?
|
|
|
|
Steve Grisetti
|
Posted: Wed 16 Feb, 2005 4:44 pm Post subject: |
|
|
Thomas McDonald wrote: | Patrick Kelly wrote: | Love those hardwood floors Mac. |
Hi Patrick
Actually there softwood floors ;-)
The floors here are all wide-board pine with them big square head nails holding everything down !
Occationally I have to get out the hammer and bang a few down !
And the creeking always gives me that "easy country charm" feeling that John Denver sang so sweet about :-)
(my daughter will never be able to sneek out of this place at night ;-)
Mac |
Creaking wood floors were never a problem for my daughter. Here in Florida, we get the "charm" of concrete slabs!! Of course, most homes are single storey anyway, so the wayward youths can just jump out the window
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Wed 16 Feb, 2005 5:14 pm Post subject: |
|
|
Steve Grisetti wrote: | Mac,
According to the numbers, the weight seems light, and POB close. How does your new "baby" feel in the hand? |
Hi Steve
The sword feels nice in hand ..... very light & fast !
It's a little shorter, blade length-wise, than I'm used to .... and gives it a bit of a hanger feel !
It actually has a good 'blade presence' to it ..... I think the POB is where it should be !
All 4 of my Vince Evans baskethilts balence within 3" inches, as does my antique Irish hilt, but I think the perfection in feel with these pieces comes from the maker, or slipper, knowing what mass needs to stay, or go, more than any of its numbers! (Peter Johnsson did a post that really helped explain this stuff)
Mac
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Steve Grisetti
|
Posted: Wed 16 Feb, 2005 5:26 pm Post subject: |
|
|
Thomas McDonald wrote: |
I think the perfection in feel with these pieces comes from the maker, or slipper, knowing what mass needs to stay, or go, more than any of its numbers! (Peter Johnsson did a post that really helped explain this stuff)
|
Yeah, Mac. The art of constructing a sword, while effected by the numbers, seems to go way beyond just the numbers to, well, art.
Steve
|
|
|
|
Ben Sweet
|
Posted: Wed 16 Feb, 2005 7:09 pm Post subject: |
|
|
Good grab Mac you dont know how close you came on not getting it when you get a chance take some pics on it next to some other basket cases so we can see how it compares in size and looks..glad it found a good home
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Thu 17 Feb, 2005 9:42 am Post subject: |
|
|
Ben Sweet wrote: | Good grab Mac you dont know how close you came on not getting it when you get a chance take some pics on it next to some other basket cases so we can see how it compares in size and looks..glad it found a good home |
Hi Ben
Yes .... and I do appreciate your indecision on this one ;-)
Actually, I initially hesitated too ..... as Vince had shown it to me right when I'd arrived !
But at that point I'd not had the chance to really see what else was there, so I passed it by !
(or I should say .... what else was there that I could afford, as there was plently I wish I could have left with :-)
Eventually I did go back , though, and secured it from the busy buying wallet of one Ben Sweet ! ;-)
Anyways .... ask and ye shall receive, mi amigo !
Shots of my new one with my other Eljay baskethilts, with my antique 'Irish' hilt, and my Vince Evans !
You take care, Ben ! Mac
Attachment: 75.07 KB
Attachment: 75.96 KB
Attachment: 64.02 KB
Attachment: 66.32 KB
Attachment: 70.62 KB
Attachment: 42.1 KB
Attachment: 64 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
William Goodwin
|
Posted: Thu 17 Feb, 2005 10:03 am Post subject: |
|
|
What a brilliant bouquet of baskets you have amassed there Mac!
Bill
Roanoke Sword Guilde
roanokeswordguilde@live.com
"I was born for this" - Joan of Arc
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Thu 17 Feb, 2005 10:56 am Post subject: |
|
|
William Goodwin wrote: | What a brilliant bouquet of baskets you have amassed there Mac! Bill |
Thanks, William !
They do have a bouquet quality about them, when gathered !
And like them pretty roses ya gotta watch out for the sharp bits ;-)
Mac
Attachment: 59.92 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
Ben Sweet
|
Posted: Thu 17 Feb, 2005 1:23 pm Post subject: |
|
|
Thanks Mac for taking the time to do the shoot! Looks great, all of them! That is some serious Metal Art
Quote: | busy buying wallet of one Ben Sweet ! |
don't know what your talking about
|
|
|
|
Thomas McDonald
myArmoury Alumni
|
Posted: Fri 18 Feb, 2005 1:16 pm Post subject: |
|
|
Might as well throw in a few other angles since I shot 'em ! Mac
Attachment: 95.51 KB
Attachment: 100.61 KB
Attachment: 90.28 KB
Attachment: 124.04 KB
'Gott Bewahr Die Oprechte Schotten'
XX ANDRIA XX FARARA XX
Mac's PictureTrail
|
|
|
|
|