Albion Knight issues -- myArmoury.com

Jonathan Blair · Posted: Fri 21 Apr, 2017 9:03 am Post subject: Albion Knight issues

Last year, I purchased a brand new Albion Knight with scabbard from Albion. After the 6+ months of waiting, I received the sword in November. When I opened it up, I noticed a slight click when I'd dry handle the sword. I brought this up with Mike Sigman, who told me that it was just settling and should go away.

Well, this morning I went to pick up my Knight, and it sounds like crepe paper when I touch the grip. Crackling, popping, clicking. The side of the grip near the guard is loose and I can press against it and it moves. I have never cut with it and have only dry handled the blade. We had thunderstorms go through the area and I think the humidity caused something inside to swell or shift and break.

Any suggestions?

Mark Moore · Posted: Fri 21 Apr, 2017 9:24 am Post subject:

For a sword of that caliber(and price), I would expect no issues like THAT. Eek!

I would re-contact Albion ASAP. Wink

....McM

Brian K. · Industry Professional

Yes, contact Mike and send it back. At this point the grip has shown it's true colors and any adjustment for the better is not going to happen.

Jonathan Blair · Posted: Fri 21 Apr, 2017 10:55 am Post subject:

Thanks for all the replies so far. I e-mailed this morning and described the problem. Hopefully I'll hear something back sometime today, but I doubt it.

Brian K. · Industry Professional

Mark Moore · Posted: Fri 21 Apr, 2017 12:13 pm Post subject:

I'm sure you will hear back SOMETHING soon. This isn't a problem Albion would take lightly. It sounds to me like the problem is in the wood of the grip. Maybe shrunken? I don't think Albion uses any type of shims, but I could be wrong. Good luck!...McM

Joe Fults · Posted: Fri 21 Apr, 2017 2:00 pm Post subject:

Joe Fults · Posted: Fri 21 Apr, 2017 2:04 pm Post subject:

Mark Tan · Posted: Fri 21 Apr, 2017 6:53 pm Post subject:

My ringeck had the same problem upon delivery, and i hear other people with albion swords have the same issue. I do think albion needs to fix this, especially considering their price point and reputation. Mike gave me the same explanation, and the sound got worse with time.

I fixed the problem my wicking loctite 290 between the blade and guard. You can try it if you don't wanna send the sword back

Sam Barris · Posted: Fri 21 Apr, 2017 8:39 pm Post subject:

I've never known Albion to not have top notch customer service. I'm sure this will be resolved.

Mark Moore · Posted: Wed 03 May, 2017 1:05 am Post subject:

Well, Jonathan...It's been a while now. What news on your Knight? Good news, we hope! Happy

....McM

Jonathan Blair · Posted: Wed 03 May, 2017 6:17 am Post subject:

It has been sent back and is at the cutler shop now. How long it will take is unknown (it has been there since last Thursday). Regardless of how long it takes, the proof will be in the taste of the pudding.

Jonathan Blair · Posted: Mon 15 May, 2017 1:13 pm Post subject:

My Knight has returned with the problem fixed. Many thanks to Albion!

Mark Moore · Posted: Mon 15 May, 2017 1:51 pm Post subject:

Good to hear! Did they happen to say WHY this occurred? .....McM

Jonathan Blair · Posted: Tue 16 May, 2017 8:32 am Post subject:

Unfortunately, no. 'tis a mystery.

Mark Moore · Posted: Tue 16 May, 2017 9:50 am Post subject:

Really?

I find it truly hard to believe that they didn't offer *some kind* of explanation---besides 'just settling'. Since other Albion owners have had similar issues, it kinda makes one wonder---maybe they got a bad batch of wood? And---how many more might be out there? Question

.....McM

Jonathan Blair · Posted: Wed 17 May, 2017 6:18 am Post subject:

I've asked what the cause was. I'll report back with what I find out.

Jonathan Blair · Posted: Thu 18 May, 2017 5:38 am Post subject:

According to Mike, it was cracked and broken epoxy under the wood that did it.