| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term. Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
Author |
Message |
W. Blanchard
Location: Canada Joined: 04 Feb 2015
Posts: 2
|
Posted: Wed 04 Feb, 2015 11:44 am Post subject: Help in idenitying Powder Horn |
|
|
This Powder Horn has been in my families possession for at lest 73 years. There are no identifying Marks or Numbers on it. I thought at first it was Military but there are no War Marks and it seems too well made to be manufactured as a Novelty item. Anyone seen one like it?
Attachment: 335.69 KB
[ Download ]
Attachment: 331.83 KB
[ Download ]
Attachment: 298.8 KB
[ Download ]
|
|
|
|
Shahril Dzulkifli
|
Posted: Tue 24 Feb, 2015 5:44 pm Post subject: Help in Identifying Powder Horn |
|
|
I haven't seen this kind of powder horn before.
Any experts?
“You have power over your mind - not outside events. Realize this, and you will find strength”
- Marcus Aurelius
|
|
|
|
Lin Robinson
|
Posted: Wed 25 Feb, 2015 4:23 am Post subject: |
|
|
Identifying powder horns, absent markings, can be somewhat difficult because they were made over such a long period of time and in many locations for different uses. Yours appears to be an antique based on the spout attached to the tip and the metal base. I believe it may be a military priming horn used by an artillery battery to prime muzzle loading cannon. It may also have been used on board a ship. The valve is adjustable for the amount of priming or charge required and the lever is, of course, used to open the horn and pour the charge. The end of the spout would be covered when the valve was opened so there would be, in theory, no direct connection between the touch hole of the cannon and the powder supply in the horn when it was actually used. The tip would act as a measure, holding the correct amount of charge until it was time to pour it into the touch hole.
Artillery horns were usually very large since quite a bit of powder was used to insure ignition and therefore a larger reservoir was needed so the horn would not need frequent refilling. Yours is a bit small for an artillery horn but that does not mean it wasn't. Valves of the type on your horn were used on a lot of artillery horns but also on horns used with other arms. There were a lot of different valve arrangements in use. If this is an artillery horn I suspect it dates from early to mid-19th century.
It is also possible that this is not an artillery priming horn at all but one used with a musket although, of course, paper cartridges were almost always used during the muzzle loading era, rather than horns.
Absence of markings is curious, if it is indeed a military issue horn but not unknown.
I hope this helps but surely others will also offer ideas.
Lin Robinson
"The best thing in life is to crush your enemies, see them driven before you and hear the lamentation of their women." Conan the Barbarian, 1982
|
|
|
|
W. Blanchard
Location: Canada Joined: 04 Feb 2015
Posts: 2
|
Posted: Wed 25 Feb, 2015 8:26 am Post subject: |
|
|
Thanks Guys, Since I posted I found this on an Antique Site so at lest there is another one out there although it doesn't give any information on it.
http://oneofakindantiques.com/catalog/2582_an...horn_1.htm
I was hoping the time frame would be around the 1790's
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|