Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > An Attempt on Baselard: From an Old File to the Dagger Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Mon 23 Dec, 2013 2:27 pm    Post subject: An Attempt on Baselard: From an Old File to the Dagger         Reply with quote

As I already have almost completely finished Rondel-dagger, it's quite normal to want to make the other four of the basic dagger types.

First the baselard was started. As there are several different styles exist, I stopped my attention on this one



Well, I like also the double-T design but now I was restrained by the piece of steel I had.
Let me tell some words about the steel. As the name of the thread implies, I'll use an old file for this project. This gives me some clue about its type - this should be U9, U10 or (unlikely, but plausible) - U12. All these are good tool steels, where U (from Russian word uglerod - Carbon) stands (quite obviously) for Carbon, while 9, 10 and 12 are the Carbon content in the steel (0,9%, 1,0% and 1,2% respectively).

And the work began......
The file with ground teeth and "sharpened" tip (actually, this was done some time ago)



First I wanted to lengthen the forward part of the future blade
Heating



and forging



and again, and again..... until I reached the length I wanted.



After that I lengthened the tang - the one I had was really very short. After some time I already had almost twice longer one



and had nothing more to do but to forge the cutting edges of the blade. Well, this tool steel is not the easiest one to work on, but I think I've done it.


"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury


Last edited by Boris Bedrosov on Mon 23 Dec, 2013 4:10 pm; edited 1 time in total
View user's profile Send private message Visit poster's website
P Ullrich





Joined: 26 Apr 2013

Posts: 50

Feedback score: None
PostPosted: Mon 23 Dec, 2013 2:43 pm    Post subject:         Reply with quote

Well done! Looks like a fun project
View user's profile Send private message Send e-mail
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Fri 27 Dec, 2013 1:53 pm    Post subject:         Reply with quote

Today I made some good progress on both blades.
After some normalization the blade was stripped off from the black oxides; this was done by hand-drill and steel wire-brush



Also all excessive metal was removed by some minor cutting and grinding; and the shape and edges were made symetrical. I call all this proccess "calibration".
The rest of the work was simple grinding using a belt-grinder.

The blade after the first, initial pass with grit #40 - I have really A LOT black spots, dents and imperfections



On the belt-grinder again. This is the third pass with grit #40 - after it the blade was looking quite better.



And finally - the blade after the pass with grit #60



I still have some black spots, but far fewer. Actually, the only one that boders me is the spot in the area of the shoulders of the tang at the bottom - I think I won't be able to sand it completely without damiging the edge or altering the cross-section. Anyway - it will be a good hallmark of the hand-forging.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Ian Hutchison




Location: Louisiana / Nordrhein-Westholland
Joined: 27 Nov 2007

Posts: 625

Feedback score: None
PostPosted: Fri 27 Dec, 2013 4:22 pm    Post subject:         Reply with quote

Very nice, Boris. I will be interested to see this one finished. I'm always surprised that you have multiple projects at the same time, all at a high standard, and I can barely manage one at a time!
'We are told that the pen is mightier than the sword, but I know which of these weapons I would choose.' - Adrian Carton de Wiart
View user's profile Send private message
Bjorn Hagstrom




Location: Höör, Skane
Joined: 25 Oct 2007
Likes: 1 page
Reading list: 8 books

Posts: 355

Feedback score: None
PostPosted: Sat 28 Dec, 2013 6:17 am    Post subject:         Reply with quote

I love your posts, Boris! Please keep them coming Happy
And my all time favorite dagger is the baselard, so looking forward to see this one progress!

There is nothing quite as sad as a one man conga-line...
View user's profile Send private message MSN Messenger
Richard Rohlin





Joined: 02 Jan 2009

Posts: 5

Feedback score: None
PostPosted: Thu 02 Jan, 2014 12:31 pm    Post subject:         Reply with quote

Boris,

Once again, I am watching your posts with a mixture of jealousy and intense interest. Can't wait to see what you do with this one!
View user's profile Send private message Send e-mail
Radovan Geist




Location: Slovakia
Joined: 19 Aug 2010
Likes: 5 pages

Posts: 399

Feedback score: None
PostPosted: Tue 07 Jan, 2014 4:53 am    Post subject:         Reply with quote

a very promising beginning:)
I wouldn´t be too worried about those black spots, unless they are too deep. You can still polish them with iron brush, and little irregularity could even give the blade a feel of "authenticity" (but of course, that´s a matter of a personal preference).

I´m looking forward to updates.
View user's profile Send private message
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Tue 07 Jan, 2014 5:16 am    Post subject:         Reply with quote

Well, actually I'm not quite worried by them - almost all will disappear when sanded.
And "yes" - the deepest could really give some touch of authenticity, something I really love.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Tue 04 Feb, 2014 1:28 pm    Post subject:         Reply with quote

I haven't written any post for a long time - I'd got some other problems to deal with recently; and the work with both daggers was in a short-time hiatus, but I hope now I'm back again.

Well, the progress so far includes heat-treatment, sanding and polishing of the blade

* after the heat-treatment - the blade was stripped-off from black oxides



** results from the sanding - after grits #120, #220 and some stones and sanding paper up to #600 respectively







*** and the final result after polishing





Although quite lesser, my nemesis with this project - the great black spot/depresion near the shoulders of the tang, still remains. But as already discussed - it will be the hallmark, showing the hand-work.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Tue 04 Feb, 2014 2:34 pm    Post subject:         Reply with quote

As I already have the blade finished, it's time to do some work on the hilt.

First, I cut two pieces of steel - 5 mm thick for the guard and 3 mm thick for the pommel; and cut the slots in them



After some bending and shaping I got the guard and pommel almost ready



And both plates after some initial sanding up to grit #120



Some test-fit - almost there, I just need the final, precise fitting of the guard







For the grip of this project I chose somewhat more ordinary wood - namely walnut. In this case it's exremely well dried - the tree has been cut down almost 20 years ago in 1996.
As the block was quite thick (6 cm) I needed to cut it alongside



in order to get a piece just one-third of this - 2 cm


"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Sat 15 Feb, 2014 4:10 pm    Post subject:         Reply with quote

* this is the way I imagine the grip of the baselard



** and some time later, when it was cut



*** as I was not fully satisfied by the shape of the guard, it was re-worked with adding of two trapezoid pieces on both ends





**** the grip in place after it was drilled alongside and matching slot for the tang was cut in



Now I must fit well the grip to both guard and pommel before peening all details in one assembly.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Kai Lawson





Joined: 26 Aug 2010
Likes: 7 pages

Posts: 589

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Sat 15 Feb, 2014 7:58 pm    Post subject:         Reply with quote

I love your WIP threads Mr. Bedrosov. They really inspire me to make more of my own stuff. The nice thing is, I can take similar materials and I have pictorial evidence of "what it can look like (if you do it right)"
"And they crossed swords."
--William Goldman, alias S. Morgenstern
View user's profile Send private message
Daniel Wallace




Location: Pennsylvania USA
Joined: 07 Aug 2011

Posts: 580

Feedback score: None
PostPosted: Sun 16 Feb, 2014 10:35 am    Post subject:         Reply with quote

can't wait to see this one finished
View user's profile Send private message
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Sat 22 Feb, 2014 4:28 pm    Post subject:         Reply with quote

The fitting of this grip turned out to be an interesting adventure - regardless what I've done I always got some air between the wood and metal. Finally, with help of some really thin strips of brass (0.25 mm) and even more thinner black paper, I managed to fill these spaces and to assemble the grip





The presence of the wood seriously altered my work - I had no other choice but to peen the tang cold.
Although the tang was annealed well, it started to show some cracks when the work progressed. So, the last couple of milimeters were hot-peened. This was quite challenging job - quick, but powerful heating to bright red, followed by even quicker peening. The walnut was saved, only the epoxy between the wood and pommel showed some strong signs of burning.
The rivet block is again modified nut.

Finally, I added four pins - a couple on each side. These were made from ordinary nails, cut in two - the longer pieces with the nail-heads were placed near the middle, while the shorter ones are near the ends.




"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Radovan Geist




Location: Slovakia
Joined: 19 Aug 2010
Likes: 5 pages

Posts: 399

Feedback score: None
PostPosted: Sun 23 Feb, 2014 10:39 pm    Post subject:         Reply with quote

Re: gaps between the wood and steel parts - don´t tell me about that: I was going through that nightmare this weekend, trying to fit handle on my Swiss short sword:) But you did much better! Nicely done, really.
View user's profile Send private message
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Sun 02 Mar, 2014 3:38 pm    Post subject:         Reply with quote

Recently, the baselard had some close encounter with the belt-grinder Laughing Out Loud





My aim here was to straighten the wood from the guard to pommel, in order to prepare it for shaping of the handle. All the curves were filed to their final shape and all excessive wood - removed.
Additionally, a couple of small but nasty cracks in the walnut I've got, were filled with epoxy.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Kai Lawson





Joined: 26 Aug 2010
Likes: 7 pages

Posts: 589

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Sun 02 Mar, 2014 5:26 pm    Post subject:         Reply with quote

What's your secret sir--long years of experience? Did you just eat your vegetables? Do you have powers? All your projects look great, and I know I learn loads just following them. You must be learning every day!
"And they crossed swords."
--William Goldman, alias S. Morgenstern
View user's profile Send private message
Radovan Geist




Location: Slovakia
Joined: 19 Aug 2010
Likes: 5 pages

Posts: 399

Feedback score: None
PostPosted: Mon 03 Mar, 2014 6:44 am    Post subject:         Reply with quote

that´s really neat:)
i cant wait for the final result
View user's profile Send private message
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Tue 04 Mar, 2014 5:54 pm    Post subject:         Reply with quote

Kai Lawson wrote:
What's your secret sir--long years of experience? Did you just eat your vegetables? Do you have powers? All your projects look great, and I know I learn loads just following them. You must be learning every day!


I don't think, there are some special secrets or powers - just work.
And actually, I don't consider myself some master - in my eyes, my works look somewhat childish, compared with the trully masterpieces, created by such people as Peter Johnsson, Leo Todeshini, Michael Pikula, Owen Bush ..... (just stopping, I don't want to miss someone I'm really learning from).

And, please, don't call me "Sir" or "Mr." anymore - OK? Wink
Just "Boris" is really absolutelly enough.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website
Boris Bedrosov
Industry Professional



Location: Bourgas, Bulgaria
Joined: 06 Nov 2005

Posts: 700

Feedback score: None
PostPosted: Wed 05 Mar, 2014 1:18 pm    Post subject:         Reply with quote

I rounded the corners of the grip and made another pass on the belt-grinder with #120. After that I handled this dagger as a real weapon for the very first time





Honestly, I'm not quite sure if this should be the correct cross-section of the grip - I shaped it in a way I felt it best for my personal taste.

"Everyone who has the right to wear a long sword, has to remember that his sword is his soul,
and he has to separate from it when he separates from his life"
Tokugawa Ieyasu

Find my works on Facebook:
Boris Bedrosov's Armoury
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > An Attempt on Baselard: From an Old File to the Dagger
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum