Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Historical Arms Talk > a bas-relief rubbing, Han Dynasty, latter half of the 2th c. Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Fri 22 Nov, 2013 7:38 am    Post subject: a bas-relief rubbing, Han Dynasty, latter half of the 2th c.         Reply with quote


Since the chariottes were no longer deployed for field battle, it is reasonable to consider this image was presenting the internal troops...

there are some points:
hand-halberd, it was only appeared during the Han Dynasty and seldom mentioned
saber and tassel, the shape of fittings are worth researching.
Gouxiang, a special type of buckler


Last edited by X Zhang on Fri 22 Nov, 2013 6:21 pm; edited 3 times in total
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Fri 22 Nov, 2013 7:52 am    Post subject:         Reply with quote






Gouxiang, the Han buckler
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Fri 22 Nov, 2013 7:59 am    Post subject:         Reply with quote







han saber blades
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Fri 22 Nov, 2013 8:07 am    Post subject:         Reply with quote


hand halberd


han halberd head


sheld pottery figurine in a tomb[/img]
View user's profile Send private message
Sam Gordon Campbell




Location: Australia.
Joined: 16 Nov 2008

Posts: 678

PostPosted: Fri 22 Nov, 2013 5:35 pm    Post subject:         Reply with quote

Hm. interesting finds.
I haven't seen much along the lines of these before.
Might have to do some reading myself.

Member of Australia's Stoccata School of Defence since 2008.
Host of Crash Course HEMA.
Founder of The Van Dieman's Land Stage Gladiators.
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Fri 22 Nov, 2013 6:04 pm    Post subject:         Reply with quote






a clearer copy
View user's profile Send private message
Mark Moore




Location: East backwoods-assed Texas
Joined: 01 Oct 2003
Likes: 6 pages
Reading list: 1 book

Posts: 2,294

PostPosted: Sat 23 Nov, 2013 5:30 am    Post subject:         Reply with quote

Very interesting. That's quite an interesting depiction of ancient Eastern warfare. Thanks for posting!....McM
''Life is like a box of chocolates...'' --- F. Gump
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Sat 23 Nov, 2013 5:49 pm    Post subject:         Reply with quote





and this... it is my latest finding in an Antique auctions website: Han dynasty halberd head and cord about two thousand years ago.
View user's profile Send private message
Greg E




Location: Nebraska
Joined: 14 Jul 2013
Likes: 8 pages
Reading list: 9 books

Posts: 111

PostPosted: Sat 23 Nov, 2013 7:56 pm    Post subject:         Reply with quote

I am amazed at how delicate thew sabre blades look. I am sure they weren't but they do look it.
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Sat 23 Nov, 2013 8:38 pm    Post subject:         Reply with quote

Greg E wrote:
I am amazed at how delicate thew sabre blades look. I am sure they weren't but they do look it.


er.......the blade are 6~8mm thick or even more......... it's much thicker than weapons of this kind.



2007, a guy re-ground a Han dynasty saber blade (but of course, doing that with a 2000-years-old antique is very controversial...). And there are some of the images he posted.

overlength:1207mm
bladelength:1007mm
wide, lower:27.5mm
thick, lower:8.8mm
wide, upper:19.2mm
thick, upper:5mm
weight:925g
View user's profile Send private message
Mark Moore




Location: East backwoods-assed Texas
Joined: 01 Oct 2003
Likes: 6 pages
Reading list: 1 book

Posts: 2,294

PostPosted: Sun 24 Nov, 2013 6:02 am    Post subject:         Reply with quote

OMG....I would be nerved out to the point of drinking to ever grind on a blade that old. Looks like he did a good job, though!.............McM
''Life is like a box of chocolates...'' --- F. Gump
View user's profile Send private message
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Sun 24 Nov, 2013 6:49 am    Post subject:         Reply with quote

Mark Moore wrote:
OMG....I would be nerved out to the point of drinking to ever grind on a blade that old. Looks like he did a good job, though!.............McM



BTW,i get a question about this: Is this kind of geometrical sword tips a unique Chinese style, or broadly used in other cultures? U know, it suddenly appeared in the 2nd century BC. and never existed before. was it affected by some foreign influences? I'm not sure.
View user's profile Send private message
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

PostPosted: Sun 24 Nov, 2013 12:22 pm    Post subject:         Reply with quote

Thank you for posting this. I find early Chinese steel metallurgy fascinating.
These "knife"-swords are very beautiful. Essential form and function.
I would love to try and make one.

Is there any remains of or clues to the kind of scabbards and/or carry system used for this kind of sword?
I have only seen images of blades.
I guess the hilt was wrapped with silk cord? Is this a probable assumption? Or a combination of wood or leather + over binding of silk?

The ring hilted knife had a very widespread popularity. A couple of centuries earlier Celtic warriors were using ring hilted knives: some say they were large carving knives. I think they had another more sinister use, knowing the popularity of taking the heads of defeated enemies in battle....
(The celtic knives looked very different from these Chinese swords, naturally. More like monster versions of the small ring hilted utility knife that was in use from central europe to the far easter reaches of the eurasian continent from the bronze age and onwards).

Thanks for posting this fascinating material!
View user's profile Send private message Visit poster's website
Timo Nieminen




Location: Brisbane, Australia
Joined: 08 May 2009
Likes: 1 page
Reading list: 1 book

Posts: 1,504

PostPosted: Sun 24 Nov, 2013 12:34 pm    Post subject:         Reply with quote

X Zhang wrote:
BTW,i get a question about this: Is this kind of geometrical sword tips a unique Chinese style, or broadly used in other cultures? U know, it suddenly appeared in the 2nd century BC. and never existed before. was it affected by some foreign influences? I'm not sure.


I don't know of anything like this earlier than the Chinese ones. The Chinese ring-pommel sabres are the first long swords of this general style. The steel ones might be the earliest; there are long bronze ring-pommel dao, but they appear to be of similar age, and are thought to be bronze copies of the steel dao (possibly for funerary use, rather than martial use).

Similar tips appear on some Han bronze handled knives (basically knife-size versions of the long sword), but I don't know of such tips earlier. It's possible that such knives are the ancestor of the long sword, but one would like to see a few earlier examples.

A possible ancestor of such Han knives and swords is the Ordos ring-pommel bronze knife. I haven't seen this "tanto" point (as modern knife makers call it) on any Ordos knives.

Ring-pommel steel dao appear at about the same time among the Xiongnu and others, and where preservation allows, the same "tanto" tip is sometimes used. AFAIK, the Chinese examples are older. However, there is more diversity of tip styles in the Xiongnu swords, so they are also a possible ancestor (with the Chinese adopting one of their many varieties).

The same style turns up in Korea and Japan, later. These are either Chinese-made or Chinese-influenced.

"In addition to being efficient, all pole arms were quite nice to look at." - Cherney Berg, A hideous history of weapons, Collier 1963.
View user's profile Send private message Visit poster's website
Timo Nieminen




Location: Brisbane, Australia
Joined: 08 May 2009
Likes: 1 page
Reading list: 1 book

Posts: 1,504

PostPosted: Sun 24 Nov, 2013 12:53 pm    Post subject:         Reply with quote

Peter Johnsson wrote:

Is there any remains of or clues to the kind of scabbards and/or carry system used for this kind of sword?
I have only seen images of blades.
I guess the hilt was wrapped with silk cord? Is this a probable assumption? Or a combination of wood or leather + over binding of silk?


Have read that some examples have been found with traces of silk on grip and pommel. Yang Hong (Weapons in Ancient China) shows one example (pg 211) that has traces of a cord wrap (I assume silk) over what looks like a built-up grip core. Hard to tell from the drawing, and those details aren't given in the text. On the previous page is one with a cord wrapped grip and pommel. Looks like different cord on pommel and grip.

Early suspension was the usual scabbard-slide. Square or flared scabbard bottom fittings (as used on earlier jian). The one on pg 210 in Yang Hong has a scabbard slide, doesn't show the bottom (it's missing), and the scabbard is spiral-wrapped (with silk ribbon?). That's the only scabbard I've seen with evidence of the covering. P-mounts and other styles with 2 suspension rings on one side of the scabbard (so a classic sabre suspension) turn up later, but I think there are 3rd century examples.

"In addition to being efficient, all pole arms were quite nice to look at." - Cherney Berg, A hideous history of weapons, Collier 1963.
View user's profile Send private message Visit poster's website
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

PostPosted: Sun 24 Nov, 2013 1:52 pm    Post subject:         Reply with quote

Thanks Timo!

I see them clearly before me.

:-)
View user's profile Send private message Visit poster's website
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Sun 24 Nov, 2013 11:17 pm    Post subject:         Reply with quote

Peter Johnsson wrote:
Thank you for posting this. I find early Chinese steel metallurgy fascinating.
These "knife"-swords are very beautiful. Essential form and function.
I would love to try and make one.

Is there any remains of or clues to the kind of scabbards and/or carry system used for this kind of sword?
I have only seen images of blades.
I guess the hilt was wrapped with silk cord? Is this a probable assumption? Or a combination of wood or leather + over binding of silk?

The ring hilted knife had a very widespread popularity. A couple of centuries earlier Celtic warriors were using ring hilted knives: some say they were large carving knives. I think they had another more sinister use, knowing the popularity of taking the heads of defeated enemies in battle....
(The celtic knives looked very different from these Chinese swords, naturally. More like monster versions of the small ring hilted utility knife that was in use from central europe to the far easter reaches of the eurasian continent from the bronze age and onwards).

Thanks for posting this fascinating material!


Er....Actually.....Y E S! i have some photos and pictures about that.



These are imitation from Northeast Asia about 1700~1500 years old. Decorative patterns may be different, but the general rig is quite similar.



This is an antique what was buried swamp in southern China. (it is exhumed from swamp is always well preserved.)

And....the carry system....


from 5th BC to 4th AD, chinese swjord/saber carry system was very extremely stable. We chinese call it "璏"(zhi) style(most Chinese did not know this ancient word although...... ). the “璏” means the “sword nose”, which is actually a belt loop.
Look at these pictures, the chariot driver of Terra Cotta Warriors.


And.......this is 璏


Last edited by X Zhang on Mon 25 Nov, 2013 2:24 am; edited 1 time in total
View user's profile Send private message
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

PostPosted: Mon 25 Nov, 2013 1:31 am    Post subject:         Reply with quote

Great information! Thank you!
View user's profile Send private message Visit poster's website
X Zhang





Joined: 07 Aug 2011

Posts: 40

PostPosted: Mon 25 Nov, 2013 5:51 am    Post subject:         Reply with quote

Peter Johnsson wrote:
Great information! Thank you!





bronze Scabbard chapes. From them you can understand the the cross section of scabbard.
Hope it can help

I have never seen any maker outside of china interest in Han dynasty saber. i am really looking forward to your works
View user's profile Send private message
Timo Nieminen




Location: Brisbane, Australia
Joined: 08 May 2009
Likes: 1 page
Reading list: 1 book

Posts: 1,504

PostPosted: Mon 25 Nov, 2013 11:55 am    Post subject:         Reply with quote

Ran into a paper describing analysis of leather on a Chinese scabbard: http://www.sciencedirect.com/science/article/...2511003763

Summary: Alum-tanned leather over wood core. 6th century BC, for a bronze sword.

"In addition to being efficient, all pole arms were quite nice to look at." - Cherney Berg, A hideous history of weapons, Collier 1963.
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Historical Arms Talk > a bas-relief rubbing, Han Dynasty, latter half of the 2th c.
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum