| Author |
Message |
Sean Flynt
|
 Posted: Thu 08 Dec, 2011 7:38 am Post subject: English Cutler Kit |
 |
|
I got one of the eating knife kits from The English Cutler http://www.todsstuff.co.uk/theenglishcutler/k....htm#thumb to build alongside Tod's recent contest (thanks for the inspiration and materials, Tod!). I figured that would be a good way to impose a deadline on the work so it wouldn't sit in a drawer for months. The result is below. This was a very enjoyable project and I'm pleased with the results. It's given me confidence and skills to take on some other languishing knife projects. With the notable exception of the pins and thread, everything here is from the kit--blade, cherrywood (yes, I dyed cherrywood,) leather for internal and external scabbard and leather thong. I didn't use the kit's brass rod for pins because I wanted a specific and somewhat modern look of black and steel.
I used nails for the pins. I should have followed Tod's instructions for the back seam of the external scabbard but instead tried to get cute with a fine whip stitch through the edges of the seam. Bad idea. I saved it, but it wasn't worth the extra effort to use that method. Do yourself a favor and use the thread and needles Tod supplies, following his instructions for a saddle stitch.
So, what I have is a very nice late medieval-ish knife with some modern notes--something for a stylish German banker's desk, perhaps. On second thought, maybe European bankers shouldn't be allowed sharps right now.
 Attachment: 36.01 KB
Attachment: 41.85 KB
Attachment: 192.98 KB
Attachment: 219.33 KB
Attachment: 201.9 KB
-Sean
Author of the Little Hammer novel
https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
|
|
   |
 |
|
Jonathan Hopkins
|
| Posted: Thu 08 Dec, 2011 10:57 am Post subject: |
|
|
Beautiful work, Sean. We all knew it would be! 
|
|
|
|
|
Sean Flynt
|
|
|
|
|
Henrik Bjoern Boegh
Location: Agder, Norway Joined: 03 Mar 2004
Posts: 386
|
| Posted: Thu 08 Dec, 2011 1:38 pm Post subject: |
|
|
That's a stunning knife, Sean! Well done!!!
Cheers,
Henrik
Constant and true.
|
|
|
|
|
Sean Flynt
|
|
|
|
|
Leo Todeschini
Industry Professional
|
|
|
|
|
Sean Flynt
|
|
|
|
|
|
Aleksei Sosnovski
|
| Posted: Fri 09 Dec, 2011 1:31 pm Post subject: |
|
|
Sorry for hijack this thread, but I don't want to start my own. My knife inspired by Leo's competition. I did not buy Leo's kit (sorry, but making the blade is the biggest fun for me  ) but made the whole knife myself. It was the first thing that I heat treated in my self-made electric kiln but it came out perfectly, hardened to estimated 56 HRC and razor sharp. The only power tools I used were a cordless drill and a variable RPM angle grinder. Unfortunately I did not have time to make a sheath as I was busy on a couple of armor projects as well. Well, honestly speaking, I have never done any leather tooling so making a beautiful sheath would be a major challenge for me. The worst thing is that I probably don't have leather that can be tooled and I don't know where to get it except Internet, but then shipping to my country would probably make it too expensive.
Once again, thanks to Leo for the great contest (though I was not chosen  ) and inspiration!
Attachment: 82.84 KB
[ Download ]
|
|
 |
|
Sean Flynt
|
|
|
|
|
|
Jerry Otahal
Location: Houston, Texas Joined: 18 Jul 2007
Posts: 5
|
| Posted: Fri 09 Dec, 2011 3:30 pm Post subject: English Cutler Kit |
|
|
Great looking knife and a very attractive sheath. I am glad you were not in the competition.
Yes, knife making is very habit forming.
|
|
|
|
|
Sean Flynt
|
|
|
|
|
|
|
This is a standard topic
