| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term. Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
Author |
Message |
Scott Roush
Industry Professional
|
Posted: Thu 11 Aug, 2011 5:43 pm Post subject: Spanish Dancer - A Belduque Interpretation |
|
|
The idea started for this after I attended Ric Furrer's shear steel course. I was looking for something to use the rest of my shear steel billet for and Chuck Burrows (Wild Rose Trading Co.) recommended a belduque. Belduques were basically earlier equivalents of bowies and were brought to the New World by the Spanish. They were often seen in the American Southwest and Mexico and were very long, pointy fighters with thick spines, forge welded iron fittings and full tangs.
I'm typically not interested in strict historical reconstructions therefore mine deviates in a couple of respects. First... the fittings were probably individually forge welded while I basically welded on a couple of big wrought iron bars in the vicinity of the handle and bolsters (see pics). Also.... after attending Blade this year I've become interested in thin, light bladed, well balanced fighting knives. I love the graceful elegance of the thin blade with nice distal taper. As well as the speed of handling. Therefore mine doesn't have the typical 1/4" spine but a hair over 1/8". I also elected for a morticed, hidden tang contruction of the scales placed between the forge welded bolster and pommel. Mine is also a bit shorter.. some of the historical examples had 15" plus blades.
But the over-all profile and look reflect the spirit of this knife I think.
I'm calling it 'Spanish Dancer' as it is just so graceful, fast and a joy to handle. It is 15.5" long, with 10.5" blade. The steel is Aldo 1084 with multiple edge quenching that brought out some very interesting alloy banding that actually shows some shiny areas (vanadium??) from extended ferric soak. I'm saving the shear steel for the next go at one of these. The balance is right at the bolsters, closer to the handle. The wood is some very unique 'curly black oak burl' given to me by Mr. Mark Farley. I've never seen anything like it. Then there are some buffalo horn spacers.
Here are some construction pics:
http://www.bigrockforge.com
|
|
|
|
Bryce Felperin
|
Posted: Thu 11 Aug, 2011 5:49 pm Post subject: |
|
|
Beautiful knife with great looks!
|
|
|
|
Andy D C
|
Posted: Thu 18 Aug, 2011 7:45 pm Post subject: |
|
|
I would echo Bryce, it's a beautiful knife. Could you give us weight and balance details?
Andy D C
|
|
|
|
Perry L. Goss
|
Posted: Fri 19 Aug, 2011 5:21 am Post subject: Chuck Burrows |
|
|
Scott:
Nice. I especially like it when folks treat the spines on a blade and jazz them up.
Speaking of Chuck Burrows, have you ever been to the one guy's museum out in Taos with the early weapons?
Chuck mentioned it to me, can not recall the guy's name.
Thank you!
Scottish: Ballentine, Black, Cameron, Chisholm, Cunningham, Crawford, Grant, Jaffray, MacFarlane, MacGillivray, MacKay-Reay/Strathnaver, Munro, Robertson, Sinclair, Wallace
Irish/Welsh: Bodkin, Mendenhall, Hackworth
Swiss: Goss von Rothenfluh, Naff von Zurich und Solland von Appenzel
|
|
|
|
Perry L. Goss
|
Posted: Fri 19 Aug, 2011 5:34 am Post subject: Chuck Burrows |
|
|
Scott:
Nice. I especially like it when folks treat the spines on a blade and jazz them up.
Speaking of Chuck Burrows, have you ever been to the one guy's museum out in Taos with the early weapons?
Chuck mentioned it to me, can not recall the guy's name.
Thank you!
Scottish: Ballentine, Black, Cameron, Chisholm, Cunningham, Crawford, Grant, Jaffray, MacFarlane, MacGillivray, MacKay-Reay/Strathnaver, Munro, Robertson, Sinclair, Wallace
Irish/Welsh: Bodkin, Mendenhall, Hackworth
Swiss: Goss von Rothenfluh, Naff von Zurich und Solland von Appenzel
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|