Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Off-topic Talk > Scabbard leather Reply to topic
This is a standard topic  
Author Message
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Fri 06 Feb, 2009 5:10 pm    Post subject: Scabbard leather         Reply with quote

Scabbard leather?
Where do I get thin Vegetable tanned leather for covering a scabbard? Is there any problem with using the chrome tanned stuff? And what about oil tanned?
Also what weight should I use and from what animal, sheep, reindeer, cow, pig, etc.?
Lastly I cant figure out a pattern to use I looked at all the old threads on this but I still cant figure out the pattern?
Oh and were all viking sword belt/baldrics attatched via a strap bridge or are there any other ways of attatching the belt/baldric to the scabbard?
Thanx
Z
View user's profile Send private message
Chuck Russell




Location: WV
Joined: 17 Aug 2004
Reading list: 46 books

Posts: 936

PostPosted: Fri 06 Feb, 2009 6:53 pm    Post subject:         Reply with quote

http://www.siegelofca.com/default.asp

http://www.tandyleatherfactory.com/

pattern? best pattern is based off of your sword. are you making one with a wooden core? or are you just making a leather scabbard? reason i ask is because if you are just making a leather scabbard then you would want a veggie tanned say maybe 8 oz leather. if its got a wooden core then thin leather, whether it be veggie, chrome or whatever it can be as thin as you want it to be.

i'm not 100% on the strap bridge part. maybe others can comment better.
View user's profile Send private message Yahoo Messenger MSN Messenger
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Fri 06 Feb, 2009 7:33 pm    Post subject:         Reply with quote

Yeah its a wood core I had a friend make for me, it just needs a covering. I heard chrome tanned was bad it like does something to the metal or something if they come in contact.
View user's profile Send private message
Jared Smith




Location: Tennessee
Joined: 10 Feb 2005
Likes: 1 page

Spotlight topics: 3
Posts: 1,532

PostPosted: Fri 06 Feb, 2009 7:38 pm    Post subject:         Reply with quote

I am not sure of the relative corrosive strengths of the different kinds of leather. However, if you seal it well with carnauba wax/ cream, it will not easily corrode. Vegetable tanned leather is normally chosen for leather working where you want it to accept tooling, and when you want it to have the ability to quickly shrink (something like 3%) and conform around an object (cell phone, gun, scabbard core riser, whatever) after sewing. It's historically accurate for medieval period to.
Absence of evidence is not necessarily evidence of absence!
View user's profile Send private message
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Fri 06 Feb, 2009 7:44 pm    Post subject:         Reply with quote

Ok so it sounds like it should be veg. tanned.
What animal should it be from? And what is thin in oz.?
View user's profile Send private message
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Fri 06 Feb, 2009 8:14 pm    Post subject:         Reply with quote

Ok duh I just found the answer
Quote:
1.5 to 2 ounce weight calf leather preferred

and I'll get it veg. tanned.

So my only remaining question is, what was period for scabbard belt/baldric?
Would this be historical or should it have a strap bridge?
look at pic



 Attachment: 7.16 KB
Untitled.jpg

View user's profile Send private message
Jonathan Blair




Location: Hanover, PA
Joined: 15 Aug 2005
Likes: 9 pages
Reading list: 2 books

Posts: 496

PostPosted: Sat 07 Feb, 2009 7:44 am    Post subject:         Reply with quote

IIRC, 1 oz = 1/64 inch thickness on average. So, 4 oz leather averages 1/16 inch thick.
"Think not that I am come to send peace on earth: I came not to send peace, but a sword." - The Lord Jesus Christ, from The Gospel According to Saint Matthew, chapter x, verse 34, Authorized Version of 1611
View user's profile Send private message
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Tue 10 Feb, 2009 4:25 pm    Post subject:         Reply with quote

Okay I found 1.5-2.0 oz vegetable tanned pig-skin. I cant find calf-skin with these specifications, is it worse or is there a problem with it being pig and not calf skin? is this less historical or wrong or worse or something
View user's profile Send private message
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

PostPosted: Tue 10 Feb, 2009 6:22 pm    Post subject:         Reply with quote

My tip would be 2 to 3 oz oak tanned cowhide leather for scabbards with risers allowing you to mold the leather to the riser. I would use 3 to 4 oz for scabbards with detailed tooling, to allow for deeper impressions.

I think there are plenty of resources on this forum about scabbard making. I know I've found quite a few threads that gave me incredible insight.

Good luck.

Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Zach Gordon




Location: Vermont. USA
Joined: 07 Oct 2008

Spotlight topics: 1
Posts: 252

PostPosted: Tue 10 Feb, 2009 7:03 pm    Post subject:         Reply with quote

Thanx I'll look for that Happy
View user's profile Send private message
Doug Lester




Location: Decatur, IL
Joined: 12 Dec 2007

Posts: 167

PostPosted: Tue 10 Feb, 2009 9:14 pm    Post subject:         Reply with quote

Chrome tanned leather is only a problem if the leather comes in contact with the blade. If the scabbard has a wood core or a vegetable tanned liner chrome tanned leather is not a problem and may be more flexable to work with. The one exception is if you want to tool the leather. Goat, sheep, kangaroo, and dear are all thin leathers with goat and kangaroo have the most strength per weight of leather.

I just dug into my closet and took a look at some vegetable tanned kangaroo leather that I got off Ebay and on second though it should wrap around a wood core just fine if you want to stick with vegetable tanned leather. Goat a sheep should be about the same, but I have never seen it offered vegatable tanned.
View user's profile Send private message
Chad Arnow
myArmoury Team


myArmoury Team

PostPosted: Tue 10 Feb, 2009 9:20 pm    Post subject:         Reply with quote

Doug Lester wrote:
Chrome tanned leather is only a problem if the leather comes in contact with the blade.


Or the guard, or anything steel. Happy In many cases, the guard will rest against at least a little of the leather. I personally would steer away from it so it doesn't discolor/corrode the steel.

Happy

ChadA

http://chadarnow.com/
View user's profile Send private message Send e-mail Visit poster's website


Display posts from previous:   
Forum Index > Off-topic Talk > Scabbard leather
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum