new medieval pieces -- myArmoury.com

Grzegorz Kulig · Industry Professional

Here are some new medieval pieces made by me.

Sallet based on original piece produced in Innsbruck (1495).

1) hand forged, as always
2) visor - hot-forged in charcoal fire - one piece
3) thickness of steel : bowl 2,5mm medium-carbon steel; visor 2mm spring steel; neck - 1,5mm medium-carbon steel,
4) unfortunately, the bowl has been welded, but our customer couldn't afford raised in one piece bowl
5) high-polished, unfortunately , that was customer's wish. I prefer satin finishing. Wink

More photos (icluding some during production) and photo of original here : http://www.thorkil.ovh.org/innsbruck_sallet.htm

Swiss klappvisor bascinet based on original piece from Valeria Castle in Sion raised in one piece.

1) bascinet raised in one piece of steel and visor raised in one piece of steel, so no welding!!!
2) hot-forging in charcoal fire
3) also the hinge has been hot forged hinge in the same way
4) medium-carbon steel
5) I started forging with 3mm steel. In ready helmet thickness of steel vary in different points of the helmet. at the top it is about 2,6mm and edges has about 1,4 - 1,2mm
6) satin finished
7) weight - circa 2900 g
More photos (also from raising process) and photo of original here : http://www.thorkil.ovh.org/swiss_klappvisor_eng.htm

Arms based on Churburg piece Ch S10:

Every piece hand and hot forged in charcoal fire, spring steel.
Fluer-de-lys brass decoration in style of Charles VI armour.
Some changings have beed made regarding to customer's wish (like extended upper arm and addtional decoration). The shape of arms were made regarding to customer's measurements, so they are a bit different than original.
More photos (also from hot-forging proces) and photo of original here : http://www.thorkil.ovh.org/churburg_arms.htm

Legs based on original piece from Churburg:
1) Hand forged.
2) Made with "mixed-techniques" - both cold and hot forging in charcoal fire.
3) Mild steel 1,5mm.
4) They have historical buckles.
5) Leather 2 and 3mm.
6) The shape of legs were made regarding to customer's measurements, so they are a bit different than original.
More photos, together with photo of original piece on : http://www.thorkil.ovh.org/Churburg_legs.htm

You are welcome to comment. Happy

Thanks, Greg (aka Thorkil).

Randy W · Posted: Thu 27 Nov, 2008 5:37 pm Post subject:

Absolutely beautiful work. I agree, a satin finish is so much more visually pleasing to my eye as well.

Randy

Jean Thibodeau · Posted: Thu 27 Nov, 2008 6:12 pm Post subject:

Mikko Kuusirati · Posted: Fri 28 Nov, 2008 12:21 am Post subject:

Very beautiful, clean lines. Wonderful work!

And yeah, a mirror polish often looks a bit tacky to me. Not to mention that it's harder to maintain, to boot. Happy

M. Eversberg II · Posted: Fri 28 Nov, 2008 8:32 am Post subject:

So VERY shiny...how on earth do you get it like that?

I rather like that Klaapvisor, too.

M.

R D Moore · Posted: Fri 28 Nov, 2008 9:26 am Post subject:

I always look forward to seeing your work. Absolutely beautiful!

Olivier L-Beaulieu · Posted: Fri 28 Nov, 2008 2:46 pm Post subject:

Very beautiful!

But I will ask a question because something is wrong with the original... Look at the spring pin. When the visor is locked, the articulated tail cannot articulate... It is a weird helmet. Someone could help me to understand how the helmet works?

http://www.thorkil.ovh.org/platnerstwo/helmy/pozne/19k.jpg

Grzegorz Kulig · Industry Professional

Thank you Gentlemen for compliments and appreciation.
It's also nice to see that you agree with me about mirror polishing.