| Author |
Message |
Alan Schiff
Industry Professional
|
 Posted: Sat 18 Nov, 2017 7:46 pm Post subject: For Sale: Cut & Thrust Sidesword |
 |
|
Here's a new piece available from Paladin Forge: a cut & thrust made from a Hanwei/Tinker bastard blade with fuller. The guard and pommel are mild steel, with a mirror polish. The blade is sharpened and polished, but still shows some of the original marks that were pretty deep. I didn't want to get too aggressive when polishing and sharpening it. The sword is peened. The scabbard and handle are poplar with blue leather wraps. The sword fits snugly in the scabbard and will not fall out when held upside down, but is still easy to draw.
Stats:
Overall length: 39.25 inches
Blade length: 33.25 inches
Blade width at guard: 1.5 inches
Point of balance: 5 inches from guard
Center of percussion: 21 inches from guard
Grip length: 4 inches
Weight: 2.71 pounds
The price is $325 US plus shipping. The suspension straps seen in the photos are not attached yet, I will configure them for left or right-handed draw before shipping. You can also see a spot near the tip of the scabbard where the leather shrank after gluing. If you are interested, you can send me a pm or email at contact@paladinforge.com.
Thanks for looking,
Alan
|
|
   |
 |
|
Bram Verbeek
|
| Posted: Sun 19 Nov, 2017 6:26 am Post subject: |
|
|
I have a h/t bastard with fuller that I plan to treat very similarely. It would be very similar to the dimensions of the Red Dragon single hander. Glad to see this is not unknown territory.
The price seems very good, but I will stubbornly try my own hand at it.
|
|
|
|
|
Alan Schiff
Industry Professional
|
| Posted: Wed 29 Nov, 2017 12:54 pm Post subject: |
|
|
|
Happy to report that this piece is now sold.
|
|
|
|
|
|
|
This is a standard topic