Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > My Grandfather's Gun Reply to topic
This is a standard topic  
Author Message
Max S.





Joined: 14 Jan 2017

Posts: 2

PostPosted: Sun 15 Jan, 2017 8:27 am    Post subject: My Grandfather's Gun         Reply with quote

Hello everyone, I am trying to identify my grandfather's old revolver. It was stolen from my family and my father and I are trying to find out what kind of revolver it was so the search would be somewhat easier. This is the only picture we have unfortunately. All I can tell you about the gun is that you have to cock the hammer back before it can be fired, there is a small pin in front which releases the entire cylinder from the housing, or you could load it when you slide out a side piece that is beside the hammer. He found it way back in the 70s in the trunk of an old car in New Mexico. The barrel extends another inch or two behind that photo. Any help or guidance would be greatly appreciated. Thank you for your time, Max.


 Attachment: 394.97 KB
[ Download ]
View user's profile Send private message
Lin Robinson




Location: NC
Joined: 15 Jun 2006
Likes: 6 pages
Reading list: 6 books

Posts: 1,241

PostPosted: Sun 15 Jan, 2017 9:57 am    Post subject:         Reply with quote

You have, or at least had, a German Model 1879 revolver. I should be 10.55 mm in caliber with a 7.2 inch barrel. The barrel is "stepped" and octagonal until it reaches the longest section of barrel, which appears to be round. You have to use the cylinder pin to punch the empties out of the cylinder, which is a poor way to do it, but this is a very early self-contained cartridge revolver. It also has a safety. This would be a pretty valuable piece in excellent condition. It appears to be missing the lanyard ring which would have been at the end of the butt.

It is a good idea to take clear pictures of your guns and always record the make, model and serial number, if there is one. In some jurisdictions now, California in particular, a stolen gun which goes unreported can get you in serious trouble. I suppose they may also fine you if you cannot provide the serial number but someone who lives there can better answer that question.

Obtaining cartridges for the gun will be next to impossible so at least it won't be used to harm any one.

Lin Robinson

"The best thing in life is to crush your enemies, see them driven before you and hear the lamentation of their women." Conan the Barbarian, 1982
View user's profile Send private message
Victor R.




Location: Klein, Texas
Joined: 28 Jan 2008
Reading list: 4 books

Posts: 364

PostPosted: Sun 15 Jan, 2017 10:38 am    Post subject:         Reply with quote

Glad you knew about that, Lin. I was curious and started looking and was mostly able to eliminate vs. determine. The only thing I had been able to figure out is that it wasn't likely of US manufacture, and was just heading down the "Germany" trail after seeing a Mauser of similar form, but not the same. Figured I'd check back for replies before diving further into it. Happy

Interesting piece - the form first made me think S&W, but no break-top, so that ruled them out (well, at least the more common and well known/documented S&Ws). Nice bit of learning today.
View user's profile Send private message
Max S.





Joined: 14 Jan 2017

Posts: 2

PostPosted: Sun 15 Jan, 2017 11:24 am    Post subject:         Reply with quote

Wow you guys are good!!! Thank you very much Lin!! My dad and I searched for hours yesterday and there were many similar ones but never exact. Now if anything, we at least know what it was.. that means alot. It's been reported to the auth. of course and hopefully we can round it up. Pawned off we're sure. Yeah it was a beast.. when I was a boy I had to use two hands to lift it... sure bet it made a helluva noise. Thanks again everyone... Cool
View user's profile Send private message
Lin Robinson




Location: NC
Joined: 15 Jun 2006
Likes: 6 pages
Reading list: 6 books

Posts: 1,241

PostPosted: Sun 15 Jan, 2017 11:31 am    Post subject:         Reply with quote

Victor R. wrote:
Glad you knew about that, Lin. I was curious and started looking and was mostly able to eliminate vs. determine. The only thing I had been able to figure out is that it wasn't likely of US manufacture, and was just heading down the "Germany" trail after seeing a Mauser of similar form, but not the same. Figured I'd check back for replies before diving further into it. Happy

Interesting piece - the form first made me think S&W, but no break-top, so that ruled them out (well, at least the more common and well known/documented S&Ws). Nice bit of learning today.


I had a heck of a time finding it in my reference material but was sure it was foreign-made and probably German. Mauser Werke apparently made some of them and those are the most valuable. I found the reference in The Standard Catalog of Military Firearms - 5th Edition..

Glad to be of help.

Lin Robinson

"The best thing in life is to crush your enemies, see them driven before you and hear the lamentation of their women." Conan the Barbarian, 1982
View user's profile Send private message
Paul Mullins





Joined: 22 May 2006

Posts: 120

PostPosted: Tue 17 Jan, 2017 5:46 pm    Post subject:         Reply with quote

You can easily find ammunition for the Reichsrevolver. You can safely fire .44Russian loaded with black powder, fired mine many times that way.
View user's profile Send private message AIM Address Yahoo Messenger


Display posts from previous:   
Forum Index > Historical Arms Talk > My Grandfather's Gun
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum