| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
| Author |
Message |
|
John Lundemo
Industry Professional
|
 Posted: Fri 24 Feb, 2012 1:57 pm Post subject: Odinblades Acid Etching WIP |
 |
|
Hey guys,
Got two pieces here getting ready for acid etching. Resist is already developed. They're touched up and ready for tape.
DSCF0031 (Medium) by LongshipArmoury, on Flickr
DSCF0032 (Medium) by LongshipArmoury, on Flickr
DSCF0033 (Medium) by LongshipArmoury, on Flickr
DSCF0023 (Medium) by LongshipArmoury, on Flickr
DSCF0024 (Medium) by LongshipArmoury, on Flickr
DSCF0025 (Medium) by LongshipArmoury, on Flickr
DSCF0026 (Medium) by LongshipArmoury, on Flickr
DSCF0027 (Medium) by LongshipArmoury, on Flickr
Enjoy!
|
|
  |
 |
Glen A Cleeton
|
| Posted: Fri 24 Feb, 2012 5:34 pm Post subject: |
|
|
Great stuff John. I was amazed at the depth and sharpness of etching you were displaying on a table so many years ago. Your methodology opens a great canvas to produce and project just about anything onto metals.
Cheers
GC
|
|
|
|
|
|
Bryan W.
|
| Posted: Fri 24 Feb, 2012 8:55 pm Post subject: |
|
|
Being fortunate enough to own an etched piece already by John I must say.....he does fantastic work.
I'm unsurprised that these other pieces will be awesome as well.
|
|
|
|
|
|
Matthew Stagmer
Industry Professional
|
| Posted: Sat 25 Feb, 2012 9:22 am Post subject: |
|
|
I wrote an article on him once apon a time and one of the things that stood out to me the most was his etching background. Did you know that he had a part of etching plaques on the statue of liberty?
Matthew Stagmer
Maker of custom and production weaponry
Youtube.com/ThatWorks
Last edited by Matthew Stagmer on Mon 27 Feb, 2012 3:14 pm; edited 1 time in total
|
|
 |
|
Glen A Cleeton
|
| Posted: Sat 25 Feb, 2012 3:02 pm Post subject: |
|
|
| Matthew Stagmer wrote: | | I wrote an article on him once apon a time and one of the things that stood out to me the most was etching background. Did you know that he had a part of etching plaques on the statue of liberty? |
Yes, familiar with John's work from a tutorial he posted in 2003 where he described his work on Ellis Island. Is that work you are referring to?
http://www.swordforum.com/forums/showthread.php?t=19927
Good stuff and it always good John gets recognition for his multi talented endeavors.
Cheers
GC
|
|
|
|
|
|
John Lundemo
Industry Professional
|
| Posted: Sat 25 Feb, 2012 4:03 pm Post subject: |
|
|
| Glen A Cleeton wrote: | | Matthew Stagmer wrote: | | I wrote an article on him once apon a time and one of the things that stood out to me the most was etching background. Did you know that he had a part of etching plaques on the statue of liberty? |
Yes, familiar with John's work from a tutorial he posted in 2003 where he described his work on Ellis Island. Is that work you are referring to?
http://www.swordforum.com/forums/showthread.php?t=19927
Good stuff and it always good John gets recognition for his multi talented endeavors.
Cheers
GC |
We also did all the stainless steels plaques for Hayden planetarium and a bunch of others. Thanks God just do swords now as my shoulders aren't what they used to be.
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic