Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > My Blade for Nat geo's Staffordshire hoard program . Reply to topic
This is a standard topic  
Author Message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Tue 15 Nov, 2011 10:33 am    Post subject: My Blade for Nat geo's Staffordshire hoard program .         Reply with quote

I thought I had better post some pictures of the blade I made for the recent Nat geo program.
It may or may not be or have been on display with the staffordshire hoard in the UK?
It is (roughly) based on some blades on display in salisbury and winchester museums , the consulted historians came to about the same conclusions as we did about blade shape , which was nice!
The blade is made to fit the smeasurements of the gold guard with the intertwining dogs in the hoard collection.
I had made a couple of other blades but was dismayed at the way they looked "modern" and too shiney, so at the last minute I started from scratch and re made this one . there is the normal 15n20 et al but I have thrown wrought at it all and strung out the layers so that there is grain in all the pattern , I wanted a blade that invited a closer look and rewarded you for doing just that.
I like this blade and am proud of it, it is the culmination of a flow of ideas, some solely mine , some brought about in discussion with Peter Johnsson and Jake Powning. I was in the rare position to find a client (Nat Geo) who were willing to not only pay for it but film the making of it too!
pretty much a dream ticket and great timing.
my brother managed to get a great photo, it is both a complicated and subtle blade.............



I think I showed this image before.

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Paul Hansen




Location: The Netherlands
Joined: 17 Mar 2005
Likes: 5 pages

Posts: 845

Feedback score: None
PostPosted: Tue 15 Nov, 2011 10:47 am    Post subject:         Reply with quote

Fantastic work Owen!
View user's profile Send private message
Mark Routledge
Industry Professional



Location: UK
Joined: 03 May 2010

Posts: 56

Feedback score: None
PostPosted: Tue 15 Nov, 2011 11:52 am    Post subject:         Reply with quote

That is a blade of great beauty Owen. The shape is spot on and the pattern sublime.Lovely Happy
www.wessexwildcraft.com
View user's profile Send private message Visit poster's website
David Huggins




Location: UK
Joined: 25 Jul 2007

Posts: 490

Feedback score: None
PostPosted: Tue 15 Nov, 2011 12:07 pm    Post subject: Blade for Nat Geo         Reply with quote

Excellent work Owen.

regards
Dave

and he who stands and sheds blood with us, shall be as a brother.
View user's profile Send private message Visit poster's website
Stephen Curtin




PostPosted: Tue 15 Nov, 2011 12:39 pm    Post subject:         Reply with quote

Stunning Owen, absolutely stunning work, looking forward to seeing the nat geo programme when it airs.
Éirinn go Brách
View user's profile Send private message Send e-mail
Matthew Stagmer
Industry Professional



Location: Maryland, USA
Joined: 23 Jan 2008

Posts: 493

Feedback score: None
PostPosted: Tue 15 Nov, 2011 3:08 pm    Post subject:         Reply with quote

One of my favorite of all time! Well done sir!
Matthew Stagmer
Maker of custom and production weaponry
Youtube.com/ThatWorks
View user's profile Send private message Visit poster's website
Jean Thibodeau




PostPosted: Tue 15 Nov, 2011 6:39 pm    Post subject:         Reply with quote

Amazing looking blade, are you going to mount it in reproduced handle furniture based on the gold guard with the intertwining dogs in the hoard collection or will the original pieces be slipped onto the blade for display purposes ( Not permanently assembled to avoid any changes or damage to the originals ? )
You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Wed 16 Nov, 2011 8:54 am    Post subject:         Reply with quote

Jean Thibodeau wrote:
Amazing looking blade, are you going to mount it in reproduced handle furniture based on the gold guard with the intertwining dogs in the hoard collection or will the original pieces be slipped onto the blade for display purposes ( Not permanently assembled to avoid any changes or damage to the originals ? )


Seeing this blade with reproduced hilt furniture would certainly be snazzy I think. I suppose one would use gold plated bronze to cut on cost. . . .
View user's profile Send private message
Paul Hansen




Location: The Netherlands
Joined: 17 Mar 2005
Likes: 5 pages

Posts: 845

Feedback score: None
PostPosted: Wed 16 Nov, 2011 12:20 pm    Post subject:         Reply with quote

Jeremy V. Krause wrote:
Seeing this blade with reproduced hilt furniture would certainly be snazzy I think. I suppose one would use gold plated bronze to cut on cost. . . .
As was done originally... Wink
View user's profile Send private message
Bryan W.





Joined: 27 Oct 2007

Posts: 198

Feedback score: None
PostPosted: Wed 16 Nov, 2011 5:17 pm    Post subject:         Reply with quote

So awesome looking. Great work Owen. Look forward to see what the ultimately finished product looks like. How long did it take you to make it from start to finish by yourself?
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Thu 17 Nov, 2011 1:26 am    Post subject:         Reply with quote

thanks for all the kind words.
this blade was the culmination of a series of blades.....
so I guess the truth is it took me 6 blades to get close and a 7th to get it rite.
All the other blades turned out fine but were too "brite" and had contrast that looked too modern , so on friday eve with filming on the monday I phoned up Jake Powning and had a chat about presenting work that may end up defining me on tv , that was better than OK but which for some perfectionist reason I was not happy about . I thought the blades I had made looked modern and American (for want of a better word) with definate "damascus " at the edge (for want of a better word) .
these were some of the blades that did not hit my subtle saxon asthetic (I really love these blades now! its funny how ones relationship with work can be so complicated. It is easy to lose perspective in the minutiae of it all)

of course the answer was to make it again .
So I set about doing just thatI started on friday afternoon and worked through the evening so the blade took 2/12 long days of working in the zone having just made half a dozen of similar blades.
I am glad I was not satisfied with the first few.......

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Thu 17 Nov, 2011 7:55 am    Post subject:         Reply with quote

how thick is the spine Owen? Again, that's really a beautiful blade.
View user's profile Send private message


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > My Blade for Nat geo's Staffordshire hoard program .
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum