Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > A few new finished pieces from Michaels Smithy Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Thu 20 Oct, 2011 3:17 pm    Post subject: A few new finished pieces from Michaels Smithy         Reply with quote

Over the past few weeks, there have been a few long brewing commissions that I've finished up that I wanted to share. The first one pictured is another version of the lost Oakeshott sword. I learned quite a few things from the first sword, and I wanted to revisit the design and blade type and make a few changes. This one is about an inch shorter, about .2" narrower at the base, and with a touch more profile taper at the tip. I changed the distal taper a bit, leaving a bit more mass at the base, and adding just a hair more mass at the prime cutting area and the tip. Also the edges have just a touch more meat behind them, but still sharp without any extra meat or dead weight. The blade is a little stiffer, but still dances in the hand and is very controllable. Lastly the pommel on this one is more like the original, nice an flat Happy

Length overall: 37.6"
Blade Length: 31.1"
Blade width at guard: 2.8"
Weight : 2lb 7oz
Point of balance: 6.5" forward of guard
Point of rotation and forward node: 21.5" forward of guard



 Attachment: 110.84 KB
DSCN1722.JPG


 Attachment: 130.68 KB
DSCN1723.JPG


 Attachment: 113.03 KB
DSCN1724.JPG


 Attachment: 134.82 KB
DSCN1725.JPG


 Attachment: 118.05 KB
DSCN1726.JPG


 Attachment: 88.41 KB
DSCN1728.JPG

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Thu 20 Oct, 2011 3:27 pm    Post subject:         Reply with quote

Second I completed a pattern welded viking sword that has two twisted bars in the core, arranged in a chevron pattern. This was a project that I had in the works for a long long time and learned a great deal about how to properly weld and construct edges to the core. I probably had about 4 attempts of developing a good system of getting a good solid weld at the tip, but once I figured it out... Happy

The customer wanted inlay on the hilt, and I wasn't getting the results that I wanted, so after some messages Jeff Helmes agreed to do the inlay work. For the design, inspiration was drawn from an example at the Met, and I think Jeff did a great job!

Here are some specs on the sword:
Length overall: 37"
Blade Length: 30.75"
Blade width at guard: 2"
Weight : 2lb 10oz
Point of Balance: 3” forward of guard
Point of rotation and forward node: 20.5" forward of guard



 Attachment: 131.66 KB
DSCN1729.JPG


 Attachment: 122.54 KB
DSCN1732.JPG


 Attachment: 93 KB
DSCN1733.JPG


 Attachment: 116.9 KB
DSCN1734.JPG


 Attachment: 74.94 KB
DSCN1735.JPG


 Attachment: 135.76 KB
DSCN1731.JPG


 Attachment: 95.19 KB
DSCN1736.JPG



Last edited by Michael Pikula on Fri 28 Oct, 2011 10:11 pm; edited 1 time in total
View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Thu 20 Oct, 2011 3:31 pm    Post subject:         Reply with quote

Lastly, I had a request to make a seax that was similar to one of the langseax that I had on my webpage, except to engrave some runes on the blade. I think the engraving turned out really good and opens the door for other possible engraving projects.


 Attachment: 118.05 KB
DSCN1738.JPG


 Attachment: 85.35 KB
DSCN1739.JPG

View user's profile Send private message Visit poster's website
Bartek Strojek




Location: Poland
Joined: 05 Aug 2008
Likes: 23 pages

Posts: 497

Feedback score: None
PostPosted: Thu 20 Oct, 2011 3:35 pm    Post subject:         Reply with quote

Outstanding.... Pictures as well. Eek!

Something got stuck in my eye after seeing trees reflection in the blade.
View user's profile Send private message
M. Livermore





Joined: 20 Aug 2008

Posts: 96

Feedback score: None
PostPosted: Thu 20 Oct, 2011 5:34 pm    Post subject:         Reply with quote

The pattern welded viking sword is simply wonderful.
View user's profile Send private message
Jeff A. Arbogast





Joined: 16 Oct 2008

Posts: 180

Feedback score: None
PostPosted: Thu 20 Oct, 2011 5:38 pm    Post subject:         Reply with quote

Wow! A truly beautiful viking sword. I really like the pattern-welded blades. Very well executed inlay too.
A man's nose is his castle-and his finger is a mighty sword that he may wield UNHINDERED!
View user's profile Send private message
Tim Lison




Location: Chicago, Illinois
Joined: 05 Aug 2004
Likes: 1 page
Reading list: 6 books

Spotlight topics: 1
Posts: 1,606

Feedback score: 100%
(11 total ▮ 100% positive)
PostPosted: Thu 20 Oct, 2011 6:14 pm    Post subject:         Reply with quote

Glorious! Wow. Those are great Michael! I love the re-do of the big XIII. That thing is a beast! The viking sword is great too. As always, great stuff!
View user's profile Send private message
Benjamin Rial




Location: Northern Minnesota
Joined: 28 Jan 2011
Likes: 10 pages

Posts: 144

Feedback score: None
PostPosted: Thu 20 Oct, 2011 10:03 pm    Post subject:         Reply with quote

Very beautiful work sir! Your work on the "lost Oakeshott" swords is very exciting and nice to see realized in steel.
"The only thing new in this world is the history we don't know."-Pres. Harry S. Truman

www.forgedintime.com

Vel Arte, Vel Marte
View user's profile Send private message Visit poster's website
Matthew Stagmer
Industry Professional



Location: Maryland, USA
Joined: 23 Jan 2008

Posts: 493

Feedback score: None
PostPosted: Fri 21 Oct, 2011 5:02 am    Post subject:         Reply with quote

I have to say that I have handled a ton of modern made swords made by many different makers in my time and so far Michael Pikula's pieces have been my favorite in hand. His attention to detail is outstanding and his swords just feel leathal in hand.

Michael I like all three. Of course the viking grabs my eye the most. Killer job on the termination of the core and Jeff did a fantastic job on the inlay.

And you are right, the engraving on the seax is super crisp. Looks great!

Matthew Stagmer
Maker of custom and production weaponry
Youtube.com/ThatWorks
View user's profile Send private message Visit poster's website
Matt Corbin




PostPosted: Fri 21 Oct, 2011 6:45 am    Post subject:         Reply with quote

Beautiful blades as always. I think yours is some of the cleanest pattern welding I've ever seen.
“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
View user's profile Send private message
Dan P




Location: Massachusetts, USA
Joined: 28 Jun 2007

Posts: 208

Feedback score: None
PostPosted: Fri 21 Oct, 2011 8:23 am    Post subject:         Reply with quote

Just gets better and better every time Michael posts something new.
View user's profile Send private message
W. Knight




Location: United States
Joined: 30 Jul 2011
Reading list: 7 books

Posts: 86

Feedback score: None
PostPosted: Fri 21 Oct, 2011 8:45 am    Post subject:         Reply with quote

Mr. Pikula,

The pattern welded viking sword is stunning. I find myself admiring the photos of the pattern welded swords you have done more and more each time I see a new one. I'm quite impressed with how you seem to have already mastered the art of pattern welding, when in the photos of you I've seen, you look so young! Happy

I do wish you had the specs on this sword! Personally, I like a very stout, quite hefty sword when of the middle ages' earlier purely cutting design styles. (I'm of average build, no Arnold Schwarzenegger, by any means, and I find the heavier swords pack more of a punch in my hands) Just out of curiosity, do you know a ballpark estimate of this sword's wieght?
View user's profile Send private message
Richard Furrer
Industry Professional



Location: Sturgeon Bay, WI
Joined: 11 Jun 2004

Posts: 77

Feedback score: None
PostPosted: Fri 21 Oct, 2011 9:57 am    Post subject:         Reply with quote

Well done Michael on some rather complicated projects...and to Jeff on the hilt as well.

Ric

Ric Furrer
Sturgeon Bay, WI
www.doorcountyforgeworks.com
View user's profile Send private message Visit poster's website
J Helmes
Industry Professional



Location: Lanark Highlands Ontario Canada
Joined: 06 Mar 2009

Posts: 120

Feedback score: None
PostPosted: Fri 21 Oct, 2011 11:09 am    Post subject:         Reply with quote

Micheal, It was really great getting a chance to work with you on the viking sword. I am glad to see it together. Your work is excelent!

I am looking forward to trying my hand at another hilt soon.

Cheers Jeff
View user's profile Send private message Visit poster's website
Jean Thibodeau




PostPosted: Fri 21 Oct, 2011 8:06 pm    Post subject:         Reply with quote

The sister sword to my lost Oakeshotts looks great and the " improvements " do sound good to me, although there is nothing wrong with my version the new one builds on the knowledge acquired from making the first one in giving the edges just a touch more " beef " supporting the edges and a little less flexibility.

Since my sword's edges survived the slight mishap of hitting a steel chinning bar by accident and showing no signs of any impact I assume that this new one has a slightly increased margin of " robustness " of the edges.

Being one inch shorter in the blade probably is one other reason for being just a little more rigid plus the few thousands of an inch more blade thickness.

I like the new pommel being closer to the original but not necessarily more than the curved and tapering towards the peen thickness of the pommel on mine: The aesthetics are not something so much of anything being better, but every difference gives a uniqueness to any two closely alike swords.

In hand, if I could see and hold both side by side, who knows which one I would have decided to buy but I think it would have been a difficult choice decided mostly by feel and handling than by aesthetics that are both excellent.

Your, folded steel work look flawless and is very impressive but unfortunately I don't think I could afford to buy one unless I restrained myself from buying anything else for a year ( Hard to do by the way: Not buying other things Wink Laughing Out Loud ).

But your work is really up there in the very high HIGH end and I hope that people realize how much of a bargain even your most expensive pieces are ! I feel lucky to have ordered a few custom weapons and spears and this sword before too many people start to realize that there are very few who can even make work that equals yours, and fewer still that exceed it.

Aesthetics are certainly up there, but also your swords and other weapons are designed and made as if they where to be depended on to survive in a real fight ! Some other makers are known for making performance swords but tend to more modern interpretations of period sword while you seem to be able to combine the " material " and design qualities of the current technology and the geometries and aesthetics that are very close to period swords in handling.

Oh, the inlay work on the Viking Sword is also outstanding and congratulations to Jeff Helmes also.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Sat 22 Oct, 2011 9:10 pm    Post subject:         Reply with quote

Thank you very much for all the comments and feedback, I truly appreciate it Happy especially on the pattern welding since it has been one of the initial driving factors for me to get into the craft and keep pushing my skill set.

Mr Knight, I don't recall the exact weight off hand, but I know it was somewhere in the 2lb 6-10oz range, or fairly close. I recall the blade being nicely neutral in the hand and very responsive to any movement.
View user's profile Send private message Visit poster's website
G Ezell
Industry Professional



Location: North Alabama
Joined: 22 Dec 2003

Posts: 235

Feedback score: None
PostPosted: Mon 24 Oct, 2011 6:32 pm    Post subject:         Reply with quote

Those are some insanely tight twists on the viking.... beautiful work sir!
" I have found that it is very often the case that if you state some absolute rule of history, there will be an example, however extremely unusual, to break it."
Gabriel Lebec

https://www.facebook.com/relicforge
View user's profile Send private message Visit poster's website
Rusty Thomas




Location: San Antonio, Texas
Joined: 30 Oct 2007

Posts: 31

Feedback score: None
PostPosted: Tue 25 Oct, 2011 12:44 am    Post subject:         Reply with quote

I am looking very forward to getting the XIIIb in my hands. I will of course post my impressions on it here. To say that I am pleased by the way it turned out so far would be an understatement. Jean, in the interest of continuing growth and education on this forum you should send me your "Pikula XIIIb" so I can compare and contrast them. I will of course return it to you well oiled and in the exact condition I received it in Big Grin Razz...eventually!
View user's profile Send private message
Jean Thibodeau




PostPosted: Tue 25 Oct, 2011 6:15 am    Post subject:         Reply with quote

Rusty Thomas wrote:
I am looking very forward to getting the XIIIb in my hands. I will of course post my impressions on it here. To say that I am pleased by the way it turned out so far would be an understatement. Jean, in the interest of continuing growth and education on this forum you should send me your "Pikula XIIIb" so I can compare and contrast them. I will of course return it to you well oiled and in the exact condition I received it in Big Grin Razz...eventually!


Or Michael could send me yours and I would " eventually " forward it to you. Wink Razz Laughing Out Loud Cool

But seriously, I look forward to your reactions to it and if confirm mine or in what ways they might differ in small detail because I'm certain you will be pleased and surprised as I was when I finally had mine in hand. Cool

Are you getting a basic scabbard made for it by Michael or looking into having a scabbard made more locally to you ?

Brian K. would certainly be a good choice for a high end scabbard, but it might be a longer wait before you get your sword depending on the length of his production cue.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Tue 25 Oct, 2011 6:28 am    Post subject:         Reply with quote

Very interesting idea guys! I think that doing a side by side comparison of these two swords would be very informative and provide a nice platform to compare and contrast some design elements.

I have wanted to make a series of 5-6 swords, all identical to the eye but build one like a wall hanger, then progressively improve design elements until the final sword feels and behaves the way a sword should. But then again it would be an educational project and would have to be part of an informative setting and I don't get the opportunity to talk or explain what is really going on with a sword and its properties first hand so I doubt that I'd invest the time in such a series.
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > A few new finished pieces from Michaels Smithy
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum