Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Makers and Manufacturers Talk > A long sword, finally Reply to topic
This is a standard topic Go to page 1, 2, 3  Next 
Author Message
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

Feedback score: None
PostPosted: Fri 06 Aug, 2010 8:24 am    Post subject: A long sword, finally         Reply with quote

I had to cancel this years knife maker show in Solingen because of warnings of a flare up of my old tendonitis. All went well, but work was slow for a while. Now as summer starts to show promise of the coming autumn, I have finally put the last touches to a sword that was intended for the Solingen show.

It is a long sword of a style belonging to the mid 15th C. A few swords of the Castillion group has been primary inspiration and source of information, but other swords have also supplied both data and inspiration.
The guard is directly influenced by a two hander from the Castilion group that I got to document at the Royal Armouries a few years back. The grip with its spirally bound cord under the embossed leather is taken from a German long sword kept in the Army museum in Paris. Overall shape and proportions are influenced by those medium sized long swords of the Castillion group.
It is of type XVIIIb and has a powerful and responsive feel to it. I wanted to make a sword that was not light, but rather compact and rather hefty. Its dynamic balance is strongly influenced by the sword of Svante Nilsson. In the hand the sword feels much lighter than its 1.96 kilos: on horseback you could use it single handed for powerful deliberate strokes, but it will invite two handed use when fighting on foot.

The blade is 88.5 cm long. At the base it is 5.2 cm wide and 1 cm thick. Shaping of the edge and hollow ground section is influenced greatly by the sword of Svante Nilsson Sture, only made a few cm longer and a bit more pointy. Forward pivot point is right at the point, giving good control and precision for thrusts as you move from guard to guard.
Point of balance is 7 cm in front of the guard.
In fact, the original idea behind this sword was to make a weapon with similar size and balance as the sword of Svante Nilsson. Even if this sword looks very different they share quite a bit of the same character.

The grip is made of calf and goat leather (goat leather is used for the part under the wire wrap). The grip cord is fully cord wrapped and the forward part is given a spiral winding of cord to create a riser. The spiral cord is inspired by suriving swords and depictions on effigies.
The narrow part of the grip is bound by fine twisted iron wire and secured by domed tacks. The wire provides good purchase and will also strengthen the narrow part of the grip.

Below are some snap shots showing full length and some details.
If you are interested in seeing some work in progress images, I have posted a thread at Don Fogg´s blade smith forum:
http://forums.dfoggknives.com/index.php?showt...ntry162954

Thanks for looking :-)

Peter



 Attachment: 66.84 KB
DSC07868.jpg


 Attachment: 72.25 KB
DSC07880.jpg


 Attachment: 85.92 KB
DSC07860.jpg


 Attachment: 52.36 KB
DSC07857.jpg


 Attachment: 47.62 KB
DSC07852.jpg



Last edited by Peter Johnsson on Fri 06 Aug, 2010 8:33 am; edited 1 time in total
View user's profile Send private message Visit poster's website
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

Feedback score: None
PostPosted: Fri 06 Aug, 2010 8:29 am    Post subject:         Reply with quote

Some of the originals that has provided inspiration and information:


 Attachment: 81.62 KB
P1010072.jpg
A two hander from the Castillion group has a very nice guard...

 Attachment: 18.09 KB
Scan-100806-0001.jpg
One of the original not-too-big-sized long swords from the Castillion group that was original inspiration

 Attachment: 51.81 KB
DSC01951.jpg
A Greman longsword whose grip influenced the design
View user's profile Send private message Visit poster's website
Bartek Strojek




Location: Poland
Joined: 05 Aug 2008
Likes: 23 pages

Posts: 496

Feedback score: None
PostPosted: Fri 06 Aug, 2010 8:45 am    Post subject:         Reply with quote



I hope it can go as an answer here.

Beautiful work.

As far as I see, it's somehow similar to Alexandria and Principe Albion projects, isn't it?

Short(ish) XVIII blade with quite long handle?
View user's profile Send private message
Stephen Curtin




PostPosted: Fri 06 Aug, 2010 9:01 am    Post subject:         Reply with quote

Absolutely gorgeous work Peter, thanks for sharing the pics. I do wish you would consider setting up a website and selling your swords online, though I know that this would mean a lot of additional work to your already busy schedule (I could probably never afford one anyway so it's a moot point ) Big Grin

Again great work Peter

Éirinn go Brách
View user's profile Send private message Send e-mail
Thomas R.




PostPosted: Fri 06 Aug, 2010 9:09 am    Post subject:         Reply with quote

Beautiful & gorgeous altogether! Happy This would be my weapon of choice...
http://maerenundlobebaeren.tumblr.com/
View user's profile Send private message Visit poster's website
Markus Nußbaumer




Location: Germany
Joined: 10 Feb 2009

Posts: 45

Feedback score: None
PostPosted: Fri 06 Aug, 2010 9:12 am    Post subject:         Reply with quote

Thank you for showing this wonderful piece of art.

I would like to second Barteks question. Is there any relation to Albion Principe or Alexandria (I am waiting for one of these...)
View user's profile Send private message
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

Feedback score: None
PostPosted: Fri 06 Aug, 2010 9:20 am    Post subject:         Reply with quote

Thank you guys!

Bartek (Edit: and Markus), The pommel is of the same type as the "Principe" will have (with some minor variations). You could possible say that the swords are of some basic similar type, although the very wide XVIIIc is dramatically different in looks. As to proportion blade/hilt, this XVIIIa is perhaps closer to the "Alexandria".

Stephen, The idea of my own website has not yet died completely. I have a stubborn hope it will be established. Perhaps in a not too distant future? Priorities are always first with Albion and work in the smithy, with a web site an eternal third...

I simply have to get my act together and get it done, I guess...

As to prices, my swords normally start out at around 3700 Euro / 4900 USD, with most being made for under 4800 Euro / 6300 USD
Being a craftsman supporting myself on my trade these numbers represent large sums, but in hourly pay it does not represent a high salary. Living in Sweden much is eaten away by taxes and VAT within the euro area.
View user's profile Send private message Visit poster's website
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Fri 06 Aug, 2010 9:39 am    Post subject:         Reply with quote

Goodness Peter, I absolutely love your work. Every aspect is truly inspiring & desirable. Of course, I love the leatherwork you did.
Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Matt Corbin




PostPosted: Fri 06 Aug, 2010 9:44 am    Post subject:         Reply with quote

Wow!!! The attention to detail is just mind boggling.
“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Fri 06 Aug, 2010 10:23 am    Post subject:         Reply with quote

Gosh, that's something. . . else. . . . whoa. . . . Eek!
View user's profile Send private message
Luke Zechman




Location: Lock Haven Pennsylvania
Joined: 18 Jan 2009

Posts: 278

Feedback score: None
PostPosted: Fri 06 Aug, 2010 10:23 am    Post subject:         Reply with quote

This sword is stunningly beautiful. The finish looks perfect. Congratulations on a beautiful piece!
View user's profile Send private message
Antonio Lamadrid





Joined: 17 Apr 2008

Posts: 91

Feedback score: None
PostPosted: Fri 06 Aug, 2010 10:35 am    Post subject:         Reply with quote

Pufffff! That is the most beautiful grip I have ever seen. And the rest of the sword is just amazing.
View user's profile Send private message
Matthew Stagmer
Industry Professional



Location: Maryland, USA
Joined: 23 Jan 2008

Posts: 493

Feedback score: None
PostPosted: Fri 06 Aug, 2010 10:42 am    Post subject:         Reply with quote

Nice work and thanks for sharing. I just love the handle work. The hilt detail is great too but the handle is fantastic.
Matthew Stagmer
Maker of custom and production weaponry
Youtube.com/ThatWorks
View user's profile Send private message Visit poster's website
David Sutton




PostPosted: Fri 06 Aug, 2010 11:14 am    Post subject:         Reply with quote

Peter, that truly is a masterpiece. In fact I honestly felt my jaw drop a little when I scrolled down to the pics Surprised Cool ; absolutely beautiful sword. Its always a joy and a pleasure to see your work.

I love the leather work on the grip its exquisite, lovely deep, rich colour and finish.

How did you execute the tooling? Was it done before you applied the leather to the core or after?

'Reserve your right to think, for even to think wrongly is better than not to think at all'

'To teach superstitions as truth is a most terrible thing'

Hypatia of Alexandria, c400AD
View user's profile Send private message
Peter Lyon
Industry Professional



Location: New Zealand
Joined: 20 Nov 2006
Reading list: 39 books

Posts: 249

Feedback score: None
PostPosted: Fri 06 Aug, 2010 11:56 am    Post subject:         Reply with quote

That is gorgeous. I especially like the grip detailing.
Still hammering away
View user's profile Send private message
Julien M




Location: Austin TX
Joined: 14 Sep 2005

Spotlight topics: 1
Posts: 1,086

Feedback score: None
PostPosted: Fri 06 Aug, 2010 12:40 pm    Post subject:         Reply with quote

Amazing work Peter.
I have been contemplating giving a go at such a grip since I saw that sword in the musee de l'armee in Paris. Your leatherwork is gorgeous, to say the least!

Cheers,

Julien
View user's profile Send private message
Michael MacLeod




Location: Regina
Joined: 15 Jul 2007

Posts: 16

Feedback score: None
PostPosted: Fri 06 Aug, 2010 12:50 pm    Post subject:         Reply with quote

Wow is all I can say. That is a very beautiful sword.
View user's profile Send private message MSN Messenger
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

Feedback score: None
PostPosted: Fri 06 Aug, 2010 2:31 pm    Post subject:         Reply with quote

It is balm to the heart of a bitter old sword smith to see a sword thus greeted Wink

Thank you your words are much appreciated.

On leatherwork: it is the same basic construction I normally do: wood core, with under wrap and raisers of cord. Leather put on thoroughly soaked while still damp and set with hide glue. The pattern is done last before the leather dries. It is a combination of incising, pressing and embossing. For the leaves I use a stamp that´s carved in the end of a bronze rod.

Below a photo of the basic tool set up:



 Attachment: 66.95 KB
DSC04858.jpg


 Attachment: 50.26 KB
DSC04860.jpg

View user's profile Send private message Visit poster's website
Roger Hooper




Location: Northern California
Joined: 18 Aug 2003
Likes: 1 page

Spotlight topics: 4
Posts: 4,393

Feedback score: None
PostPosted: Fri 06 Aug, 2010 3:41 pm    Post subject:         Reply with quote

That is a great and beautiful sword, but then, one can say that about all of Peter's swords. The old phrase, "fit for a king", definitely applies here.

--

I love all those Castillion/Dordogne swords. I wish there were more re-creations of members of that group.
View user's profile Send private message
Craig Johnson
Industry Professional



Location: Minneapolis, MN, USA
Joined: 18 Aug 2003
Likes: 16 pages
Reading list: 20 books

Spotlight topics: 1
Posts: 1,421

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Fri 06 Aug, 2010 7:14 pm    Post subject: Awesome Peter         Reply with quote

Hey Bro

That is just exceptional. Your really do it right. Always makes me feel like I need to work harder Happy

Very very nice.

Craig
View user's profile Send private message Send e-mail Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > A long sword, finally
Page 1 of 3 Reply to topic
Go to page 1, 2, 3  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum