| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
| Author |
Message |
Allen Foster
|
 Posted: Wed 07 Oct, 2009 12:35 pm Post subject: Nordic Runes for Sword |
 |
|
I am considering personalizing my Albion Valkyrja by having the blade engraved with Nordic Runes down the fuller of the sword. Of course I would also be interested in having the inscription as accurate as possible given the cost of the sword.
Is there a site for help in translating 11th century nordic runes or someone who is proficient with the translation or use of Nordic runes? Maybe the Younger Futhark short twig rune style might be appropriate for an 11th century Finnish sword.
Any suggestions?
Thanks
"Rise up, O Lord, and may thy enemies be dispersed and those who hate thee be driven from thy face."
|
|
   |
 |
|
Myles Mulkey
|
| Posted: Wed 07 Oct, 2009 2:23 pm Post subject: Re: Nordic Runes for Sword |
|
|
| Allen Foster wrote: | I am considering personalizing my Albion Valkyrja by having the blade engraved with Nordic Runes down the fuller of the sword. Of course I would also be interested in having the inscription as accurate as possible given the cost of the sword.
Is there a site for help in translating 11th century nordic runes or someone who is proficient with the translation or use of Nordic runes? Maybe the Younger Futhark short twig rune style might be appropriate for an 11th century Finnish sword.
Any suggestions?
Thanks |
I can help you out with that since my BA Thesis is on the runes. Definitely go with Younger Futhark for the 11th Century, and since your aim is Finland, the Swedo-Norwegian short twig style would also be the way to go. Send me a PM with the text you want translated, preferably already in the language you want it in (English, Old Norse, Finnish, etc) but I can help a bit with that too if need be. I should have a chance to look at it in the next couple of days.
|
|
|
|
|
Chris Bucklen
|
| Posted: Wed 07 Oct, 2009 11:16 pm Post subject: runes |
|
|
Be careful of what runes you use! They are not just a writing tool, they have power. I'm not crazy, I'm Asatru. I have seen the runes work in wierd ways. Here is a page that might be useful.
http://www.northvegr.org/northern/book/runes.php
"Let no man glory in the greatness of his mind,
but rather keep watch o'er his wits.
Cautious and silent let him enter a dwelling;
to the heedful comes seldom harm,
for none can find a more faithful friend
than the wealth of mother wit." - Hávamál
|
|
|
|
|
Paul Hansen
|
| Posted: Fri 09 Oct, 2009 7:30 am Post subject: |
|
|
|
Not trying to discourage you, but in that period, if a blade had letters on it, the letters would be inlayed, not engraved. Just a thought...
|
|
|
|
|
|
Myles Mulkey
|
| Posted: Fri 09 Oct, 2009 8:33 am Post subject: Re: runes |
|
|
| Chris Bucklen wrote: | Be careful of what runes you use! They are not just a writing tool, they have power. I'm not crazy, I'm Asatru. I have seen the runes work in wierd ways. Here is a page that might be useful.
http://www.northvegr.org/northern/book/runes.php |
All that Allen has for sure decided to put on the sword is the sword's name, which at this point has yet to be determined. This book http://www.amazon.com/Runic-Amulets-Magic-Obj...1843832054 is pretty comprehensive (if not a little speculative) about the magical implications of actual runic inscriptions found on artifacts and in historical documents.
I wouldn't suggest any inscriptions that use runic formulas (since their symbolic or magical meaning is not fully understood, like "AAAAAAAAZZZNNNNBMUTTT:ALU" and what not). I'd stick with the good ol' "I am *sword name*, *sword maker* made me" type of deal. 
|
|
|
|
|
|
Myles Mulkey
|
| Posted: Fri 09 Oct, 2009 8:37 am Post subject: |
|
|
| Paul Hansen wrote: | | Not trying to discourage you, but in that period, if a blade had letters on it, the letters would be inlayed, not engraved. Just a thought... |
I think the sword from Leikkimaki, Finland, which is dated to the time period in question, was engraved. It can be seen near the bottom of the page on this thread: http://www.myArmoury.com/talk/viewtopic.php?t=13390
Is it engraved or inlaid? I thought it was engraved but upon a closer look at the blade itself I can't see any. Maybe it is inlaid
|
|
|
|
|
Allen Foster
|
| Posted: Fri 09 Oct, 2009 8:44 am Post subject: |
|
|
| Paul Hansen wrote: | | Not trying to discourage you, but in that period, if a blade had letters on it, the letters would be inlayed, not engraved. Just a thought... |
Thank you for the tip. I would have been disappointed had I not done it period correct. How does inlaying work? .... and would bronze have been a good metal to use for that?
Allen
"Rise up, O Lord, and may thy enemies be dispersed and those who hate thee be driven from thy face."
|
|
|
|
|
|
Karl Knisley
|
| Posted: Fri 09 Oct, 2009 10:27 am Post subject: |
|
|
Hello
I`ve alway thought it funny, when people get Asian script, tatooed on them,and they dont speak the language.The tatooist ,could pretty much, say anything they wanted:-) If I got runes ingraved on my sword,it would probably read,
" I`am With Stupid " :-)
|
|
|
|
|
Nathan Robinson
myArmoury Admin
|
| Posted: Fri 09 Oct, 2009 10:34 am Post subject: |
|
|
| Karl Knisley wrote: | Hello
I`ve alway thought it funny, when people get Asian script, tatooed on them,and they dont speak the language.The tatooist ,could pretty much, say anything they wanted:-) If I got runes ingraved on my sword,it would probably read,
" I`am With Stupid " :-) |
haha, this is very, very true, man. Very true. I've actually seen it happen before!
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
|
|
 |
|
|
Doug Lester
Location: Decatur, IL Joined: 12 Dec 2007
Posts: 167
|
| Posted: Fri 09 Oct, 2009 10:53 am Post subject: |
|
|
|
When I was living in Portsmouth, Virginia the local newspaper had an article on the tattoo policies of the military and they told of one young man being barred from enlisting because the Chinese character on his arm that he was told ment manly really ment prostitute. Somehow, I don't think he was laughting when he left the recruiter's office I'd be real careful about engraving anything a a blade that I couldn't read. Another thing is having it gramatically correct. Not all languages use the same word order as in English.
|
|
|
|
|
Paul Hansen
|
| Posted: Fri 09 Oct, 2009 2:35 pm Post subject: |
|
|
| Allen Foster wrote: | | Thank you for the tip. I would have been disappointed had I not done it period correct. How does inlaying work? .... and would bronze have been a good metal to use for that? |
Usually, it's iron. Sometimes pattern welded.
But I think it's impossible to do without heattreating the blade again.
| Myles Mulkey wrote: | I think the sword from Leikkimaki, Finland, which is dated to the time period in question, was engraved. It can be seen near the bottom of the page on this thread: http://www.myArmoury.com/talk/viewtopic.php?t=13390
Is it engraved or inlaid? I thought it was engraved but upon a closer look at the blade itself I can't see any. Maybe it is inlaid |
The hilt is engraved, not the blade.  I didn't say engraving was unknown in the period, they just didn't do it on blades as far as I know. The engraving may have been inlayed with niello originally.
|
|
|
|
|
|
Myles Mulkey
|
| Posted: Fri 09 Oct, 2009 2:55 pm Post subject: |
|
|
| Paul Hansen wrote: | | Allen Foster wrote: | | Thank you for the tip. I would have been disappointed had I not done it period correct. How does inlaying work? .... and would bronze have been a good metal to use for that? |
Usually, it's iron. Sometimes pattern welded.
But I think it's impossible to do without heattreating the blade again.
| Myles Mulkey wrote: | I think the sword from Leikkimaki, Finland, which is dated to the time period in question, was engraved. It can be seen near the bottom of the page on this thread: http://www.myArmoury.com/talk/viewtopic.php?t=13390
Is it engraved or inlaid? I thought it was engraved but upon a closer look at the blade itself I can't see any. Maybe it is inlaid |
The hilt is engraved, not the blade. I didn't say engraving was unknown in the period, they just didn't do it on blades as far as I know. The engraving may have been inlayed with niello originally. |
Oh, sorry. My mistake 
|
|
|
|
|
Gavin Kisebach
|
| Posted: Sat 10 Oct, 2009 1:56 am Post subject: |
|
|
| Nathan Robinson wrote: | | Karl Knisley wrote: | Hello
I`ve alway thought it funny, when people get Asian script, tatooed on them,and they dont speak the language.The tatooist ,could pretty much, say anything they wanted:-) If I got runes ingraved on my sword,it would probably read,
" I`am With Stupid " :-) |
haha, this is very, very true, man. Very true. I've actually seen it happen before! |
As a brief aside, I knew a guy in the army named Mboob who had "outlaw" tattooed on this chest in Japanese. I asked him if he spoke or read Japanese, and of course he couldn't. I asked him how he know the character didn't say "moron" or something similar, and he started to look worried as we sat around in the day room chuckling and imagining all of the horrid things the tattoo might say.
By chance there was a Japanese immigrant in our unit, so we asked him to read the tattoo. He had a very heavy accent, having just moved to the US, but he told us the tattoo said "creamy nut". I thought we would all die laughing. Mboob's face just about melted off of his head, but we eventually figured out that the Japanese fellow meant to say"criminal".
Needless to say Mboob was known as Creamy Nut thereafter, and I would never get a tattoo in a language that I don't understand, no matter how exotic and cool it looked.
Now back to the runes!
There are only two kinds of scholars; those who love ideas and those who hate them. ~ Emile Chartier
|
|
 |
|
Chris Bucklen
|
| Posted: Tue 13 Oct, 2009 9:04 pm Post subject: Inlay in steel |
|
|
Here is a link to a very talented smith's inlay tutorial.
http://www.seekyee.com/Bladesmithing/the%20pr...torial.htm
"Let no man glory in the greatness of his mind,
but rather keep watch o'er his wits.
Cautious and silent let him enter a dwelling;
to the heedful comes seldom harm,
for none can find a more faithful friend
than the wealth of mother wit." - Hávamál
|
|
|
|
|
|
Myles Mulkey
|
| Posted: Wed 14 Oct, 2009 7:29 am Post subject: Re: Inlay in steel |
|
|
Excellent source, Chris!
|
|
|
|
|
Christopher Gregg
|
| Posted: Wed 14 Oct, 2009 7:37 am Post subject: |
|
|
Is not brass or silver more common for inscription inlaying? Just wondering...
Also, to extend the tattoo sub-thread, I was with my wife shopping for her next tattoo, and a fellow in the store was showing off his full-back tattoo of an Egyptian god, which he said was "Anubis", the Jackal deity and guide of the dead. Well, my wife, being an amateur Egyptologist, recognized the actual deity on his back, and explained to him that his newly permanent artwork was actually NOT Anubis, but the storm god Set (who killed his brother Osiris, and is often equated with the devil). 
Guess the fellow should have done a bit more research, eh? 
Christopher Gregg
'S Rioghal Mo Dhream!
|
|
|
|
|
G Ezell
Industry Professional
Location: North Alabama Joined: 22 Dec 2003
Posts: 235
|
| Posted: Wed 14 Oct, 2009 4:58 pm Post subject: |
|
|
There is a sax ,hiding off in Jeroen's ZIP file, that has an engraved runic inscription. I believe it is a French find, 675-700AD.
" I have found that it is very often the case that if you state some absolute rule of history, there will be an example, however extremely unusual, to break it."
Gabriel Lebec
https://www.facebook.com/relicforge
|
|
|
|
|
Allen Foster
|
| Posted: Wed 14 Oct, 2009 5:56 pm Post subject: Re: Inlay in steel |
|
|
Thanks Chris! Does this mean I won't have to heat treat (ruin) my blade?
"Rise up, O Lord, and may thy enemies be dispersed and those who hate thee be driven from thy face."
|
|
|
|
|
Ben Potter
Industry Professional
Location: Western Idaho Joined: 29 Sep 2008
Posts: 347
|
| Posted: Thu 15 Oct, 2009 8:58 am Post subject: Re: Inlay in steel |
|
|
| Allen Foster wrote: |
Thanks Chris! Does this mean I won't have to heat treat (ruin) my blade? |
The blade needs to be "soft" where the inlay is, it the tutorial the blade is differential quenched (hard edge, soft back). Unless I am mistaken your sword is most likely hardened all the way through, and would be rather difficult to engrave with traditional gravers. Also, some steels are more difficult to engrave even if they are soft, 1075 and 1095 are easier to engrave when soft than 8670M, same basic steel but different alloy content (8670M has more nickle). That said, it is possible to do the inlay even in all hard steel using grinding tools, it is much more difficult to get it to look authentic, but it is better than retempering a blade.
Hope that helps
Ben Potter Bladesmith
It's not that I would trade my lot
For any other man's,
Nor that I will be ashamed
Of my work torn hands-
For I have chosen the path I tread
Knowing it would be steep,
And I will take the joys thereof
And the consequences reap.
|
|
|
|
|
|
Tim M.
|
| Posted: Thu 15 Oct, 2009 2:48 pm Post subject: |
|
|
|
I may be mistaken, but I believe I read or heard somewhere that the Finnish had their own alphabet of runes (not to be confused with the Finnish music/poem form)? The alphabet supposedly was very similar the Futhark alphabet.
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic