Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > 5 New Pattern Welded seaxes Reply to topic
This is a standard topic  
Author Message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 11:51 am    Post subject: 5 New Pattern Welded seaxes         Reply with quote

Hi everyone, I just finished up 5 pattern welded seaxes. Four of them are meant to be more of your everyday use kind of seax that is pretty thin and very sharp. The last one is a decent sized seax that could very well be taken into a battle like situation although the edge geometry is very similar to the smaller ones were I feel it would be a more common use type seax but could be made into a heavy use seax by honing the edge back to a steeper angle. I'm going to upload and talk about each one in a separate post and my computer and internet are slower then a passed out turtle so bare with me if you come across this before I post them all. Here is an overall shot of the seaxes.


 Attachment: 96.57 KB
100_3478_x.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 12:05 pm    Post subject:         Reply with quote

First one is 11 inches overall with a 5 3/4inch blade with a spine just shy of 3/16
The blade is O1/L6 with a L6 edge. The blade received a deep etch and the oxides have been removed and the blade is sealed with olive oil so that the blade is safe to use for food.
The handle is oak with vegetable tanned leather over top. The color achieved by burnishing the leather and applying a natural tone dye over the top.
I am asking for $300 plus shipping



 Attachment: 68.69 KB
100_3456_x.jpg


 Attachment: 91.93 KB
100_3457_x.jpg


 Attachment: 91.82 KB
100_3458_x.jpg


 Attachment: 87.69 KB
100_3459_x.jpg


 Attachment: 99.89 KB
100_3462_x.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 12:17 pm    Post subject:         Reply with quote

Second one is 11 1/8 inches overall with a 6 inch blade with a 1/8 spine.
The blade is O1/L6 with a L6 edge. The blade received a deep etch and the oxides have NOT been removed and the blade is sealed with olive oil. I can remove the oxides if a buyer wishes so at no cost so that the blade can be safe to use for food.
The handle is oak with vegetable tanned leather over top. The color achieved by dyeing the leather black.
I am asking for $270 plus shipping



 Attachment: 86.29 KB
100_3463_x.jpg


 Attachment: 64.15 KB
100_3467_x.jpg


 Attachment: 62.3 KB
100_3468_x.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 12:32 pm    Post subject:         Reply with quote

Third one is 10 1/4 inches overall with a 5 7/8 inch blade with a solid 1/16 spine.
The blade is O1/L6 with a L6 edge. The blade received a deep etch and the oxides have NOT been removed and the blade is sealed with olive oil. I can remove the oxides if a buyer wishes so at no cost so that the blade can be safe to use for food.
The handle is oak with vegetable tanned leather over top. The color achieved by dyeing the leather a light brown and allowing little time for the color to penetrate so it has a slightly worn or used appearance.
I am asking for $300 plus shipping



 Attachment: 94.19 KB
100_3469_x.jpg


 Attachment: 84.23 KB
100_3472_x.jpg


 Attachment: 82.24 KB
100_3473_x.jpg


 Attachment: 83.5 KB
100_3474_x.jpg


 Attachment: 63.44 KB
100_3475_x.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 12:51 pm    Post subject:         Reply with quote

Forth one is 12 1/4 inches overall with a 7inch blade with a 3/16 spine
The blade is O1/L6 with a L6 edge. The blade received a deep etch and the oxides have been removed and the blade is sealed with olive oil so that the blade is safe to use for food.
The handle is oak with vegetable tanned leather over top. The color achieved by applying an oxblood colored dye.
I am asking for $325 plus shipping



 Attachment: 92.17 KB
100_3447_x.jpg


 Attachment: 62.94 KB
100_3448_x.jpg


 Attachment: 59.72 KB
100_3449_x.jpg


 Attachment: 47.06 KB
100_3450_x.jpg


 Attachment: 65.99 KB
100_3453_x.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 10 Jun, 2009 1:06 pm    Post subject:         Reply with quote

Fifth one is 15 inches overall with a 9 7/8 inch blade with a 1/4 spine.
The blade is O1/L6 with a L6 edge. Unlike the other four blades this seax has only 2 twisted rods in the spine and not four. The blade received a deep etch and the oxides have NOT been removed and the blade is sealed with olive oil. I can remove the oxides if a buyer wishes so at no cost so that the blade can be safe to use for food.
The handle is oak with vegetable tanned leather over top. I decided to play a little bit with the shape of the handle on this one. I choose to start with 8 faces at the base and blend them away to the four faces that meet the blade. The corners are well broken and it feels really good in the hand. The Grip is slightly wasted toward the middle to help center the hand and help prevent slipping on to the blade. The color achieved by dyeing the leather a light brown.
I am asking for $425 plus shipping



 Attachment: 87.51 KB
100_3441_x.jpg


 Attachment: 79.15 KB
100_3443_x.jpg


 Attachment: 83.36 KB
100_3444_x.jpg


 Attachment: 85.34 KB
100_3446_x.jpg

View user's profile Send private message Visit poster's website
Carl W.




Location: usa
Joined: 07 Aug 2008

Posts: 184

Feedback score: None
PostPosted: Thu 20 Aug, 2009 6:42 am    Post subject:         Reply with quote

Michael just finished customizing the 4th seax (12" w/red grip) for me. Understating a tad :-) he added some pins to the handle & made a sheath. I'll post photo(s) after it arrives.

Anyway, fyi on the other seaxes, Michael can & will tweak.
View user's profile Send private message
Carl W.




Location: usa
Joined: 07 Aug 2008

Posts: 184

Feedback score: None
PostPosted: Tue 25 Aug, 2009 9:14 pm    Post subject:         Reply with quote

I just got my seax - wow!! Its Way better in person than in photos. I'm fairly new to our historical hobby, but am an experienced, picky engineer. From that background (at least!) its very well done, & an excellent value. I'll put pics after customization in a Historical thread (when time) to avoid distracting from the other four seaxes. I'd buy one of them, but I already got one :-)

Market feedback... very happy customer!
View user's profile Send private message


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > 5 New Pattern Welded seaxes
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum