Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > New 'Backwards' Falchion Reply to topic
This is a standard topic  
Author Message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Wed 18 Feb, 2009 10:19 am    Post subject: New 'Backwards' Falchion         Reply with quote




Oakeshott Type: N/A
Overall Length: 30-7/8 inches
Blade Length: 24-1/4 inches
Blade width @ Base: 1-5/8 inches
Blade Width 5-3/4 inches from point: 2-1/4 inch
Blade Thickness @ Base: .210 inch
Blade Thickness 6 inches from Point: .200 inch
Hilt Overall Length: 6-3/4 inches
Length of Handle: 4-1/8 inches
Handle Construction: Wood core, cord-wrap (linen)
Guard Type: 6 (m)
Pommel Type: J
Center of Gravity: 4-1/2 inches from guard
Location of Blade Node (measured from Guard): 16 inches
Weight: 2lbs 12 oz
This unusual sort of falchion is depicted in artwork of the 14th C. and at least one example survives at the 'Musee de la Armee' in Paris, France. The cutting edge is on the concave side opposite the fuller. The blade is differential-tempered 5160 spring steel. Hardness at the edge is approximately HRc59, hardness through the spine, tang and base of blade is approx. HRc45-48. There is vitually no distal taper for the first 18 inches from the guard. The stout point is reinforced for thrusting. The spine is left un-finished with a dark, rough appearance. The furniture is of mild steel and the guard is of a truncated triangular cross-section. The handle is sandwiched hardwood wrapped in laquered linen cord. The hilt is dismountable. The tang is 3/4 inch wide at the base with a rounded shoulder. The tang tapers to approx. 1/2 inch wide, and the final 5/8 inch of the tang is reduced in section and threaded for the pommel- nut, which is a 3/8 inch diameter 1/4-20 sleeve-nut keyed for a 5mm Allen Wrench.

This is a very handly little sword. Though not light it is compact enough that it remains quick and manueverable. It is suited to powerful chopping blows, but the point is easily controlled and quite stout. I almost made this with a peened tang- but it's likely to see heavy use so I opted for take-down construction.

Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Jean Thibodeau




PostPosted: Thu 19 Feb, 2009 1:29 am    Post subject:         Reply with quote

This is a fascinating design that gives a heavy duty cutting profile with the bonus of having a nasty point at the end.

Are there variants of this style with slightly curved blades ? Blade top curving up and the edge side curving down a bit more ?

Also, longer bladed versions ? I do like this version and my question is more about variants you might make at some point.

( Stupid economy Sad This one would be very tempting if I didn't already have commitments to other projects, but it is a type I might want eventually ).

Oh, with this blade profile it should have a very nast draw cut as well as just chopping. Eek!

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
M. Eversberg II




Location: California, Maryland, USA
Joined: 07 Sep 2006
Reading list: 3 books

Spotlight topics: 1
Posts: 1,435

Feedback score: None
PostPosted: Thu 19 Feb, 2009 7:25 am    Post subject:         Reply with quote

Very interesting shape. I'd seen a few in period art, but never really took the time to see if anyone's made it before. Always figured it for another "chopper".

Nice work! Was this a custom order, or did you suddenly feel that a falchion was "now"?

M.

This space for rent or lease.
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger ICQ Number
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Thu 19 Feb, 2009 7:25 am    Post subject:         Reply with quote

Hi Jean; unfortunately there's just not enough information to answer your question with a simple yes or no. I'm only aware of the one surviving example- the rest of the inspiration is drawn from artwork from the period. The other year I did one that was more inspired by the French example- this one is based more on period-contemporary art. There is variation between the two, and I would expect even more variation existed historically. For example one of the examples in art actually has the leading edge of the cross turned down at 90 degrees to form a knuckle-bow. Having the two edges curve slightly away from each other wouldn't be an unreasonable stretch- but it would reduce the utility of the point somewhat by taking it off-line of the hand.
Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Thu 19 Feb, 2009 7:56 am    Post subject:         Reply with quote

M. Eversberg II wrote:
Very interesting shape. I'd seen a few in period art, but never really took the time to see if anyone's made it before. Always figured it for another "chopper".

Nice work! Was this a custom order, or did you suddenly feel that a falchion was "now"?

M.


Not a custom order; it was just time to make one because I felt like it! This is the fourth of these that I've made if you include the one that I made with a 'Messer' hilt.

Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Michael R. Black




PostPosted: Thu 19 Feb, 2009 11:26 am    Post subject:         Reply with quote

I'm really fascinated by this blade shape. Hope you make a lot more of them so I can snag something similar in the future.

Regards,

Michael
View user's profile Send private message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Thu 19 Feb, 2009 12:20 pm    Post subject:         Reply with quote

No doubt I will! I have another blade blank in the shop ready to go...
Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Chad Arnow
myArmoury Team


myArmoury Team

Location: Dayton, OH
Joined: 18 Aug 2003
Likes: 21 pages
Reading list: 231 books

Spotlight topics: 15
Posts: 9,531

Feedback score: 100%
(10 total ▮ 100% positive)
PostPosted: Thu 19 Feb, 2009 7:48 pm    Post subject:         Reply with quote

Really cool stuff. Happy I love that type of sword.
Happy

ChadA

http://chadarnow.com/
View user's profile Send private message Send e-mail Visit poster's website
Gavin Kisebach




Location: Lacey, Wa US
Joined: 01 Aug 2004

Spotlight topics: 1
Posts: 650

Feedback score: None
PostPosted: Thu 19 Feb, 2009 11:32 pm    Post subject:         Reply with quote

Michael that's great work. I remember first seeing this type of sword pop up in a thread a little while back, and I ran around the interwebs looking for a replica but was disappointed to find this very cool sword totally unrepresented. You've done a great job by the look of it; that thing is wicked. The spike alone would deter me, even in good armor.

Obviously if you built this thing wrong it would handle like a brick tied to a crowbar; was it a pretty straightforward build or did it require some tinkering to get the right balance?

There are only two kinds of scholars; those who love ideas and those who hate them. ~ Emile Chartier
View user's profile Send private message MSN Messenger
M. Eversberg II




Location: California, Maryland, USA
Joined: 07 Sep 2006
Reading list: 3 books

Spotlight topics: 1
Posts: 1,435

Feedback score: None
PostPosted: Thu 19 Feb, 2009 11:45 pm    Post subject:         Reply with quote

Michael Pearce wrote:
M. Eversberg II wrote:
Very interesting shape. I'd seen a few in period art, but never really took the time to see if anyone's made it before. Always figured it for another "chopper".

Nice work! Was this a custom order, or did you suddenly feel that a falchion was "now"?

M.


Not a custom order; it was just time to make one because I felt like it! This is the fourth of these that I've made if you include the one that I made with a 'Messer' hilt.


I wish I had such skill and privilege Razz

The missus must be very accepting of the nose, in the least Eek!

I think a test cut is in order...though how expensive are those cutting mats in your area?

M.

This space for rent or lease.
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger ICQ Number
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Thu 19 Feb, 2009 11:50 pm    Post subject:         Reply with quote

Not too expensive... but it will have to wait; this one is sold already.
Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Jean Thibodeau




PostPosted: Fri 20 Feb, 2009 12:00 am    Post subject:         Reply with quote

Michael Pearce wrote:
Not too expensive... but it will have to wait; this one is sold already.


That's a good sign that there might be a demand for this type and maybe other underrepresented types of swords.

Oh, and yes maybe too much curve in the top of the sword would put the point out of line but a very subtle curve combined with a little more curve on the edge side might be interesting to try.

The secondary point should tend to bite rather well in a target but the thickness there shouldn't be too small to avoid it being too fragile ? ( Not sure what to call the bottom point where the edge changes angle to form the main point ? It does sort of have axe like or bill hook possibilities ? ).

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Fri 20 Feb, 2009 8:31 am    Post subject:         Reply with quote

The leading edge point is fairly sturdy and it hits like an axe. Thunk! The COP is about 2 inches behind that point. There is some market for under-represented sword types but it's risky for makers to explore that; you could wind up with a sword sitting around unsold for a long time. When this happens once it isn't a tragedy, but if it happens regularly it can have a serious impact on a one-man cash-flow based business.
Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Scott Kowalski




Location: Oak Lawn, IL USA
Joined: 24 Nov 2006

Posts: 818

Feedback score: None
PostPosted: Fri 20 Feb, 2009 12:24 pm    Post subject:         Reply with quote

Tinker,
This is truly a great sword. I have to mirror what Jean said earlier about having other projects that are close to being done and others that I am starting to hatch as it were.

Keep up the great work!

Scott
View user's profile Send private message
Eric Sherwin




Location: Texas
Joined: 31 Oct 2006
Likes: 1 page

Posts: 31

Feedback score: None
PostPosted: Sat 07 Mar, 2009 9:40 am    Post subject: Backwards Falchion         Reply with quote

Just received it yesterday in perfect condition! What a beautiful little beast it is! Thanks, Mr. Pearce.
View user's profile Send private message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Sat 07 Mar, 2009 9:56 am    Post subject:         Reply with quote

My pleasure, Eric!
Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > New 'Backwards' Falchion
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum