Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Removing the pommel on a hand and a half sword? Reply to topic
This is a standard topic  
Author Message
Alec Wilkas





Joined: 16 Mar 2013

Posts: 5

PostPosted: Sat 16 Mar, 2013 10:32 am    Post subject: Removing the pommel on a hand and a half sword?         Reply with quote

I just recently bought this 15 century hand and a half sword on Ebay. The blade itself is actually very strong and after sparring with a friend for at least and hour the blade hasn't even scratched much, besides some nicks from a few edge to edge hits. The blade is made for cutting so it is quite thin. After all this, I've noticed the handle started to have some give to it, along with the cross guard. I'd like to remove the pommel so I can rework things, but I can't figure out how... I'm sure it's threaded, but it's on there good. Any advice?
View user's profile Send private message
Ralph Grinly





Joined: 19 Jan 2011

Posts: 330

PostPosted: Sat 16 Mar, 2013 2:21 pm    Post subject:         Reply with quote

Maybe if you posted one or two pics of the sword, someone here might be able to identify it and let you know if the pommel is screwed on or peened.
View user's profile Send private message
Alen L




Location: Ljubljana, SLovenia
Joined: 20 May 2010

Posts: 63

PostPosted: Sat 16 Mar, 2013 5:02 pm    Post subject:         Reply with quote

Yes, pictures would be most welcome. It might be screwed on AND peened, which'll make taking it off and putting it back on a bit of a hassle, or it might be simply filled with Locktite and won't budge because of that. If the whole handle, not just the crossguard, started rattling, it's usually a bad sign - don't fight with it any more, just in case it has a rat tail tang - sometimes, the blade is made OK, but doesn't gradually become less wide through the handle - it just becomes one rather flimsy thread of metal somewhere at the crossguard. Also, if you provide pictures of the sword itself, someone will probably be able to tell if they recognize the maker or if it looks like a display piece.
View user's profile Send private message
Alec Wilkas





Joined: 16 Mar 2013

Posts: 5

PostPosted: Sat 16 Mar, 2013 10:55 pm    Post subject:         Reply with quote

Oops! I tried attaching pictures from my phone but I guess they didn't attach.

Here's a picture of the hilt. I can get more if needed.



 Attachment: 238.44 KB
Took me forever to get the picture to attach. Kept having to retake it so it would be under 250 KB. [ Download ]
View user's profile Send private message
Vincent Le Chevalier




Location: Paris, France
Joined: 07 Dec 2005
Reading list: 15 books

Spotlight topics: 1
Posts: 871

PostPosted: Sun 17 Mar, 2013 1:57 am    Post subject: Re: Removing the pommel on a hand and a half sword?         Reply with quote

This is not an answer to your question but...
Alec Wilkas wrote:
sparring with a friend for at least and hour [...] The blade is made for cutting so it is quite thin.

That seems terribly unsafe.

Regards,

--
Vincent
Ensis Sub Caelo
View user's profile Send private message Visit poster's website
Colt Reeves





Joined: 09 Mar 2009

Posts: 466

PostPosted: Sun 17 Mar, 2013 10:17 am    Post subject:         Reply with quote

It looks like the Strongblade Warspike to me. http://www.sword-buyers-guide.com/strongblade.html

I don't own it, so I can't go by anything but the review, which is favorable but also shows the sword isn't exactly the most solid thing in the world, which you already knew.

As mentioned by others, I wouldn't want to engage in free-play with a sword intended for cutting and not bouting. (I drove my friend to the ER after slicing open his lip with a Cold Steel waster, so you can see where I'm coming from. You can easily do some cutting with even an unsharpened blade...)

"Tears are for the craven, prayers are for the clown.
Halters for the silly neck that cannot keep a crown.
As my loss is grievous, so my hope is small.
For Iron, Cold Iron, must be master of men all..."
-Cold Iron, Rudyard Kipling
View user's profile Send private message
Alec Wilkas





Joined: 16 Mar 2013

Posts: 5

PostPosted: Sun 17 Mar, 2013 7:25 pm    Post subject:         Reply with quote

It really isn't the best idea, but my sparring partner begged me to bout it out with him...
I'm in love with this sword, so I'm going to fix it up, but I can't seem to remove the pommel. I thank you Colt for finding my sword! Now i know for sure its only threaded. There must be a glue seal on it. Im hitting it with a hair dryer to try and break down the glue. Any other advice that may work better?
Thanks!
View user's profile Send private message
Luka Borscak




Location: Croatia
Joined: 11 Jun 2007
Likes: 7 pages

Posts: 2,307

PostPosted: Mon 18 Mar, 2013 8:07 am    Post subject:         Reply with quote

You need much more heat, you'll do nothing with hair dryer. Happy Try blowtorch.
View user's profile Send private message
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

PostPosted: Mon 18 Mar, 2013 8:09 am    Post subject:         Reply with quote

if you have access to a bench vise with rubber jaws, just firmly mount the pommel in that, blade pointing up, and use the cross as a lever, turning counter-clockwise. If it still sticks, tap the top of the pommel firmly with a hammer to see if that will break free the threads.
-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Alec Wilkas





Joined: 16 Mar 2013

Posts: 5

PostPosted: Mon 18 Mar, 2013 9:27 am    Post subject:         Reply with quote

I'll break out the vise as soon as I get home! I figured it'd go in this direction; I just wanted to make sure there wasn't any magic to it first lol.

l keep you guys updated on my progress, as I might have a little project on my hands. I also gotta give it to the Darkspike. I love this sword! Feels great in the hand and I love the style.
View user's profile Send private message
P. Frank




Location: Germany
Joined: 03 Jan 2010
Reading list: 1 book

Posts: 73

PostPosted: Mon 18 Mar, 2013 11:49 am    Post subject:         Reply with quote

Colt Reeves wrote:
You can easily do some cutting with even an unsharpened blade...)

At the risk of beating a dead horse here, I do have to chime in regarding the danger of bouting with a blade not intended for the purpose. I have a ca. 10cm (ca. 4inch) long and 0.5cm (0.2inch) deep cut in my thigh armour that demonstrates nicely that even a rebated and rather light sabre blade can leave some nasty cuts when nicked.
View user's profile Send private message
Matthew P. Adams




Location: Cape Cod, MA
Joined: 08 Dec 2008
Likes: 8 pages

Posts: 462

PostPosted: Mon 18 Mar, 2013 12:12 pm    Post subject:         Reply with quote

I would try a heat gun before I resorted to a torch. You know, like a hairdryer but stronger, used to remove paint? That might loosen the glue with less risk of igniting the grip.
"We do not rise to the level of our expectations. We fall to the level of our training" Archilochus, Greek Soldier, Poet, c. 650 BC
View user's profile Send private message
Alec Wilkas





Joined: 16 Mar 2013

Posts: 5

PostPosted: Mon 18 Mar, 2013 8:47 pm    Post subject:         Reply with quote

The torch worked like a charm! I heated it for a good two minutes, and it twisted off with no resistance at all Happy I also fixed the empty space inside the hilt and tapped it back in place with a hammer and repositioned the cross guard a bit. It's sturdy as a rock now.

I most likely won't be sparring much with it. If I do, it will just be light and predictable. Until I get a nice blunted sword for that purpose. I thank you all for your help!
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Removing the pommel on a hand and a half sword?
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum