Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Sparring Weapon Typology (proposed) Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 11:14 am    Post subject: Sparring Weapon Typology (proposed)         Reply with quote

This is something I've been working on and has been under some discussion with some HEMA people I know. I would like to see what people here have to comment.

The ultimate goal of creating this typology is to put sparring equipment in a more useful context and facilitate the development of what I would call "FOURTH GENERATION" sparring weapons.

(PLEASE NOTE: Those uncomfortable with the term 'sparring' please mentally replace it for whatever term you are happiest with, assaulting, fencing, freeplay, bouting etc. etc.)

===================

GENERATION ONE
Weapons which were not intended for Pre-1700 HEMA but have been adapted by some groups. These weapons are only marginally suitible for pre-1700 HEMA, either due to inaccurate or unrealistic performance or realism, and / or poor safety characteristics.

Boffers
http://nerolarp.com/larpgear/images/EA_Boffer_Heavy_Group.jpeg
http://www.practice-swords.com/images/products/se3909.jpg
http://www.thealmightyguru.com/Boffer/Images/Boffer-Weapons.jpg
Safety: High - Suitible for unarmored free play
Performance: Poor - unrealistic weight , no balance, often very bendy and whippy
Realism: Poor - no discernable edges, bouncy, unrealistic or nonexistant cross and pommel
Appearance: Poor
Reliability: Medium
Cost: Very Low - $5 - $10 if you make them yourself, up to maybe $50 commercially manufactured
Period: No
Still used by a lot of EMA groups and by some HEMA groups for a small amount of sparring, especially with beginners.

Rattan Sticks
http://www.scholasaintgeorge.org/bayarea/even...uckler.jpghttp://www.yamamoto.at/images/eskrima_stick_gruppe.jpg
Safety: Medium - Lighter than hardwood or metal, won't shatter like hardwood
Performance: Medium
Realism: Low - no edges, no pommel, balance is usually way off
Appearance: Poor to fairly Good depending on hilts etc.
Reliability: Good
Cost: Low - $10?
Period: Sort of
Still widely used by SCA and Escrima groups

LARP Latex covered weapons
http://www.badgersden.com/ExC/PLNTK/Swords/1108-900-X-X3.jpg
Safety: High - Can be used with no protection
Performance: Poor - very unrealistic weight & balance, bendy
Realism: Medium - Good shape, generally very flimsy, unrealistic fantasy shapes
Appearance: Medium - The commercially made ones look professional but they also look, well, LARPy
Reliability: Medium
Cost: Medium - $50 - $150
Period: No
Used by LARP groups, not used by any HEMA groups that I know of.

Shinai
http://www.karatedepot.com/sites/karatedepot/...-ke-03.jpg
Safety: Good - Good for striking, not as good for thrusting
Performance: Poor - too light, wrong shape, no edges, no cross or pommels
Realism: Low
Appearance: Good to Medium - they look EMA but at least don't look home made or LARPy
Reliability: Medium
Cost: Low - $10?
Period: Yes and no
Widely used for Kendo. Used by some HEMA groups.

Olympic style Foil / Epee / Saber
http://www.ntnui.no/fekting/img/div/epee_pistolgrip.jpg http://www.student.seas.gwu.edu/~poste/blog/i...g/foil.jpg
Safety: Good for thrust work only, requires fencing mask, gloves and gorget are a good idea too.
Performance: Good
Realism: Medium - Good for thrusting weapons of a certain type, too short and wrong weight for rapiers etc.
Appearance: Good
Reliability: Excellent
Cost: Medium - $50?
Period: Yes?
Used by some groups for rapier training as a stop gap, the Foil, and the Epee in particular are actually a good simulators for 17th-18th century smallsword fencing, and when used for this type of martial arts could be considered THIRD GENERATION sparring weapons.

(The olympic style saber, by contrast, is very much an abstraction of a real saber and is unsuitible for realistic simulation of saber combat)

Early Aluminum Weapons
http://www.karatedepot.com/sites/karatedepot/...-sw-77.jpg
Safety: Medium - Lighter than a steel blunt, Requires use of gambeson, mask, gloves and some joint protection but can be used close to full speed for cutting only, not suitible for thrusting without heavy armor.
Performance: Medium, fairly accurate weight and balance
Realism: Good, realistic cross section and blade geometry, realistic binding characterisitc
Appearance: Excellent
Reliability: Medium- Tend to get chewed up with heavy use
Cost: Medium $40 - $100
Period: No
These have been used in movie stunts since at least the 60's. They are used by some EMA groups. Some individual HEMA practitioners use them as well.

GENERATION TWO
Designed for pre-1700 HEMA or EMA use but either limited realism and / or limited contact (thrusting-only or cutting-only)

Flexible steel Rapier
http://www.dondeleo.com/images/emporium/produ...PC1098.jpghttp://grendelscave.net/armory/swords/swrap1098-i/sw1098-04.jpg
Safety: Medium - Requires fencing mask and gloves, pretty safe for thrusting, not for cutting without armor
Performance: Good
Realism: Excellent (not quite stiff enough in many cases but they are pretty good)
Appearance: Excellent
Reliability: Excellent
Cost: High - Not certain of the price, over $100
Period: Yes ?
Used by many HEMA groups and SCA Rapier for thrust work

Hardwood Waster
http://content.answers.com/main/content/wp/en...asters.jpg
Safety: Low / Medium - Lighter than steel blunts, Ok for light free play only, dangerous for thrusting without armor
Performance: Good - Weight and balance vary by quality of manufacturer but generally good
Realism: Medium - Cross is often too big, no flexibility, thick cross section
Appearance: Good
Reliability: Good
Cost: Low or Medium depending on the quality, $40 - $200 or more
Period: Yes
Widely used by HEMA groups for drill and freeplay

Steel Blunts
http://www.dondeleo.com/images/emporium/produ...PC2106.jpg http://grendelscave.net/armory/i/swch2106/swch2106-01.jpg
Safety: Poor
Performance: Excellent
Realism: Good, not identical to sharps at the bind, can be heavy
Appearance: Excellent
Reliability: Excellent
Cost: Medium to High depending on the brand (Hanwei are in the $100 range, others up to $500 or more)
Period: Yes!
Used by many HEMA groups

Aluminum Sparring Waster
http://phoenixswords.atthefaire.com/galleries...swords.JPG
http://www.kuksoolwon.com/Merchant2/graphics/..._BLACK.jpg
Safety: Medium - Lighter than a steel blunt, Requires use of gambeson, mask, gloves and some joint protection but can be used close to full speed for cutting only, not suitible for thrusting without heavy armor.
Performance: Good, accurate weight and balance
Realism: Excellent, realistic shape
Appearance: Excellent
Reliability: Good - Can get chewed up with heavy use
Cost: Medium to High - $100 - $300
Period: No
Used by some large HEMA and EMA groups and by many individual practitioners.

GENERATION THREE
Designed (or rediscovered) specifically with Pre-1700 HEMA/ WMA sparring in mind, are at least somewhat realistic in shape and handling and allow at least close to full-contact sparring

ARMA style padded Waster
http://www.armanorthhouston.org/images/teachnew1.JPG
Safety: Very Good - Suitible for full contact sparring with mask and gloves
Performance: Good - Correct weight and balance can be achieved
Realism: Medium - Good for striking and thrusting, not good at bind. Can bend on hard impact
Appearance: Poor
Reliability: Poor they seem to break constantly
Cost: Medium - They have to be home made generally and the materials can be a bit expensive $10 - $30?
Period: No
Still used by some ARMA groups, possibly other HEMA groups

Slum-Fu style padded Waster
http://www.iregames.com/jr/finished168.jpg
Safety: Good - Suitible for full contact sparring with mask and gloves, somewhat painful
Performance: Good - Correct weight and balance
Realism: Medium - Good for striking and thrusting, not good at bind. Can bend on hard impact
Appearance: Poor
Reliability: Good
Cost: Medium - They have to be home made generally and the materials can be a bit expensive, roughly $30
Period: No
These utilize Sch 80 pvc cores and orthopedic foam for flat edge geometry and thin cross-sections.
Used by a few ARMA groups and individuals and by a small HEMA group in New Orleans

Lance Chan's RSW
http://www.rsw.com.hk/double-pad-swords.jpg
Safety: Good - Suitible for full contact sparring with mask and gloves
Performance: Good - Correct weight and balance
Realism: Medium to Good- Good for striking and thrusting, Medium at bind with use of lubricant.
Appearance: Medium - Better appearance than other padded weapons due to use of covering material.
Reliability: Medium - Can break with heavy use
Cost: Medium or High depending on shipping distance ?? Not certain of the exact price.
Period: No
These have a very professional looking silver synthetic covering.
Used by many HEMA and some EMA groups, mostly on an individual basis

Modified Shinai
http://www.the-exiles.org/essay/Pics/assembled.jpg
Safety: Good - Safe for striking, less for thrusting, weighted cross unpadded.
Performance: Medium - Bouncy, too light in the blade, all wieght concentrated near the cross, slippery hard surface makes them excellent for binding and winding
Realism: Medium - No discernable edges, unrealistic cross, no pommel
Appearance: Good? - A lot of people seem to like the appearance
Reliability: Medium - they seem to break fairly regularly
Cost: Low - $10 - $30?
Period: Arguable
The precise makeup of these is still being experimented with but they are very popular.
Widely used by HEMA groups in England and Continental Europe. The standard weapon for the Dijon tournament

Longsword Foil / Fetherfechter
http://www.chicagoswordplayguild.com/c/media/...d_foil.jpg
Safety: Good - Requires use of gambeson, mask, heavy gloves as well as arm and joint protection to be used close to full speed.
Performance: Excellent
Realism: Good, somewhat bendy
Appearance: Excellent
Reliability: Excellent
Cost: Very High - $300 - $500 or more
Period: Yes!
Used by many HEMA groups. These are based on Renaissance era originals.

Nylon Waster
http://www.thearma.org/images/plastic_wasters2.JPG
Safety: Good - Requires use of gambeson, mask, gloves and some joint protection but can be used close to full speed.
Performance: Good - accurate wieght, not sure about balance
Realism: Good - Realistic shape
Appearance: Medium - white color and clearly artificial
Reliability: Good
Cost: Medium to High?
Period: No
Lighter than wasters, they bend on hard impact but can be bent back.
These are used by some of the top HEMA groups, but current availability is limited.

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print


Last edited by Jean Henri Chandler on Tue 24 Apr, 2007 3:46 pm; edited 9 times in total
View user's profile Send private message
Christian Henry Tobler




Location: Oxford, CT
Joined: 25 Aug 2003

Posts: 704

PostPosted: Tue 24 Apr, 2007 11:48 am    Post subject:         Reply with quote

Hi Jean,

This is a great idea!

When you evaluated Lance's padded swords, did you use his standard line or the performance versions? I've just recently got a cache of the performance models, and they're head and shoulders above in realistic play when compared to his earlier models.

I'll be writing a full review of them after this weekend, when we fight our first tournament of the season with them.

All the best,

Christian

Christian Henry Tobler
Order of Selohaar

Freelance Academy Press: Books on Western Martial Arts and Historical Swordsmanship

Author, In Saint George's Name: An Anthology of Medieval German Fighting Arts
View user's profile Send private message Visit poster's website AIM Address
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 11:50 am    Post subject:         Reply with quote

Christian Henry Tobler wrote:
Hi Jean,

This is a great idea!

When you evaluated Lance's padded swords, did you use his standard line or the performance versions? I've just recently got a cache of the performance models, and they're head and shoulders above in realistic play when compared to his earlier models.

I'll be writing a full review of them after this weekend, when we fight our first tournament of the season with them.

All the best,

Christian


Hi Christian,

I look forward to your review. I have not had a chance to ever handle one of Lance's swords, I'm basing my evaluation on reports from other people, and from what I can see in the many of Lance's sparring videos. The new performance models look excellent. I have actually been talking to Lance privately about developing a "FOURTH GENERATION" sparring weapon. Your ideas on the latter would also be welcome.

Jean

EDIT: If I have said anything incorrect in any of my general assessments, about the RSW or any other weapon, please correct me. I hope I have been fair and even handed but my knowledge is not alas, universal nor my judgement infallibale.

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Eric Myers




Location: Sacramento, CA
Joined: 23 Aug 2003

Posts: 214

PostPosted: Tue 24 Apr, 2007 12:40 pm    Post subject:         Reply with quote

I think you have miscategorized "Olympic foil/epee/sabre".

The three "modern" fencing weapons have been essentially the same for more than a century. Except for the blunted point, today's epee is pretty much the same as the late 19th century dueling swords. The foil was used as a training weapon and sport weapon for a long time. The modern sabre is lighter than the old dueling sabres, and has a straight blade, but is still a valid simulator for much of the repertoire. A modern epee or foil with a French or Italian grip is just as good as an old one, and a sabre with an S2000 blade is a good start.

These weapons all meet your criteria for Generation Three: "Designed...specifically with...sparring in mind, are at least somewhat realistic in shape and handling and allow at least close to full-contact sparring." Just because some folks misused them as rapier simulators doesn't negate what they were originally intended for. The epee blade (and its derivative the double wide epee blade) are very good simulators for use as small sword blades. I suggest you only list what things are good for, and not what they aren't. Otherwise you may as well add that these blades are lousy simulators for longswords, halberds, and maces too Big Grin

All three weapons are good for thrust work, and the sabre is good for cutting, if used correctly.

Also, why reinvent the wheel? A standard mask, glove, and fencing jacket (or equivalent) should be all you need if you are correctly using these weapons. An underarm protector is required for competitions, due to the increased vigor and poor distance judgment that is likely in that setting. Additional protection like a gorget is only important if these weapons are being used inappropriately.

Eric Myers
Sacramento Sword School
ViaHup.com - Wiki di Scherma Italiana
View user's profile Send private message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 12:59 pm    Post subject:         Reply with quote

Eric Myers wrote:
I think you have miscategorized "Olympic foil/epee/sabre".

The three "modern" fencing weapons have been essentially the same for more than a century. Except for the blunted point, today's epee is pretty much the same as the late 19th century dueling swords. The foil was used as a training weapon and sport weapon for a long time. The modern sabre is lighter than the old dueling sabres, and has a straight blade, but is still a valid simulator for much of the repertoire. A modern epee or foil with a French or Italian grip is just as good as an old one, and a sabre with an S2000 blade is a good start.

These weapons all meet your criteria for Generation Three: "Designed...specifically with...sparring in mind, are at least somewhat realistic in shape and handling and allow at least close to full-contact sparring." Just because some folks misused them as rapier simulators doesn't negate what they were originally intended for. The epee blade (and its derivative the double wide epee blade) are very good simulators for use as small sword blades. I suggest you only list what things are good for, and not what they aren't. Otherwise you may as well add that these blades are lousy simulators for longswords, halberds, and maces too Big Grin

All three weapons are good for thrust work, and the sabre is good for cutting, if used correctly.

Also, why reinvent the wheel? A standard mask, glove, and fencing jacket (or equivalent) should be all you need if you are correctly using these weapons. An underarm protector is required for competitions, due to the increased vigor and poor distance judgment that is likely in that setting. Additional protection like a gorget is only important if these weapons are being used inappropriately.


Thanks, I should have been more precise about my definition of HEMA. I really mean martial arts as practiced before a certain time period, exactly what the cut off date should be I'm not certain, but I would tentatively place it around 1650 or 1700?

Other folks may disagree with me on that. The definition of what constitutes the HEMA period is an important aspect of defining this typology.

I would agree with you that the epee is probably a very good simulator for the smallsword, the olympic style saber however is not even remotely suitible as a simulator for a real saber in my opinion. I'll add a qualification to the entry for the foil / epee / saber. I would consider the smallsword on the perifery of the period which I'm interested in, the period where the martial arts associated with such hand weapons had a major military as well as civilian importance.

I realise sabers and weapons like pallasches were used in combat into the 19th and even 20th centuries, but I was under the (perhaps mistaken) impression that the martial arts associated with these weapons had declined somewhat after the 17th or 18th century. Please correct me if I'm wrong as I may very well be, this is not the period I am familiar with.

And while the smallsword very definately continued as a martial art, the degree of specializatoin takes it out of the realm of what I would consider Historial European Martial Arts, and more into a Pre-Modern or Modern type. Again, this is very arguable.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Eric Myers




Location: Sacramento, CA
Joined: 23 Aug 2003

Posts: 214

PostPosted: Tue 24 Apr, 2007 1:32 pm    Post subject:         Reply with quote

Hi Jean,

Well, I disagree with your restriction of the term HEMA on semantic and philosophical grounds. Semantic: History didn't stop in 1650 or 1700, and the duels fought in the early 20th C. are absolutely historical. If you want to restrict your time period, add a descriptor, don't co-opt an existing definition. Just say "pre-1700 HEMA" for example, which makes it clear to everyone. Philosophically: There were very real duels being fought with swords into the early 20th C. Also, militaries around the world spent a lot of time training sword, bayonet, and lance use throughout the 19th C. Saying that the martial arts associated with these weapons had declined seems rather arbitrary and incorrect to me. Similarly, in respect to the smallsword, specialization removes it from the definition of HEMA? Don't forget that smallsword use against other weapons was also taught.

There are many types of real sabres! The modern sport sabre is an ok simulator for a dueling sabre as long as you don't want to do anything that requires a curved blade. It is a terrible simulator for an infantry or cavalry sabre, or any of the other heavier sabres. Again, it sounds like you are defining anything in your time frame of interest as real, and everything outside your time period of interest as somehow less, or not real. I'm not trying to get you to love other time periods, just to be fair and accurate in your terminology, and not say something general but mean something specific.

Eric Myers
Sacramento Sword School
ViaHup.com - Wiki di Scherma Italiana
View user's profile Send private message
Vincent Le Chevalier




Location: Paris, France
Joined: 07 Dec 2005
Reading list: 15 books

Spotlight topics: 1
Posts: 871

PostPosted: Tue 24 Apr, 2007 1:38 pm    Post subject:         Reply with quote

I don't really understand why the flexible steel rapier ends up in generation 2? I mean, Darkwood's blades are as close as on can safely get to a real rapier in my understanding, they are used in full contact sparring, and were rediscovered quite recently if I'm not mistaken... Wouldn't that make them generation 3?

Generation 2 in terms of rapier simulator could be closest to a schlager blade, I think...

I'm also a bit disturbed by the separation drawn between the shinai and the "modern" fencing weapons. I could be wrong about that, but it seems that they appeared roughly at the same time, in the same context ("peaceful practice"), with the same drawbacks (distortion of balance and weight, specialization) and advantages (unmatched safety). To me they should end up in the same category, though for diametrically opposed uses.

That said, I don't spar a lot, so this is based on what I read and know about the history of the weapons.

Regards

--
Vincent
Ensis Sub Caelo
View user's profile Send private message Visit poster's website
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 2:24 pm    Post subject:         Reply with quote

Vincent Le Chevalier wrote:
I don't really understand why the flexible steel rapier ends up in generation 2? I mean, Darkwood's blades are as close as on can safely get to a real rapier in my understanding, they are used in full contact sparring, and were rediscovered quite recently if I'm not mistaken... Wouldn't that make them generation 3?


I put them in Generation 2 because they are restricted to thrusting only without heavy equipment.

Part of the criteria for Generation 2 was that the weapons were restricted to thrusting only (like rapier simulators) or cutting only (like the aluminum wasters) without relatively heavy protection.

That is certainly arguable since you could assume that a rapier is only really for thrust, but I believe some fencing masters for rapier did advocate a certain amount of cutting. Of course that also would depend on which era of rapier we were talking about, I'm no expert on rapier combat but I believe more cutting was done in the earlier part of the period.

Again this typology is tentative and I'm not trying to enforce my views on anybody, I'm asking for your input here so thanks for contributing your thoughts on this. If there is a consensus that rapiers should be considered Generation 3 I'll move them.

Quote:

I'm also a bit disturbed by the separation drawn between the shinai and the "modern" fencing weapons. I could be wrong about that, but it seems that they appeared roughly at the same time, in the same context ("peaceful practice"), with the same drawbacks (distortion of balance and weight, specialization) and advantages (unmatched safety). To me they should end up in the same category, though for diametrically opposed uses.


I don't understand what you are saying exactly (I don't understand which weapons you are comparing them to or which Generation you feel shinai belongs to?) I have them in Generation One because they are not realistic in terms of handling etc. Boffers are very safe as well but they are equally if not more unrealistic.

Quote:

That said, I don't spar a lot, so this is based on what I read and know about the history of the weapons.

Regards


Your input is appreciated, I'm only personally familiar with about half of these weapons.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print


Last edited by Jean Henri Chandler on Tue 24 Apr, 2007 2:36 pm; edited 2 times in total
View user's profile Send private message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 2:33 pm    Post subject:         Reply with quote

Eric Myers wrote:
Hi Jean,

Well, I disagree with your restriction of the term HEMA on semantic and philosophical grounds. Semantic: History didn't stop in 1650 or 1700, and the duels fought in the early 20th C. are absolutely historical.


Of course they are. I'm just trying to narrow the scope somewhat for the sake of managability, any dividing line is going to be somewhat arbitrary, but arguably there should be one. Oakeshott only went up to a certain point in his typology for example, this one will also not be all encompassing. I think it would be difficult to make sense of a typology which included bayonett, tomahawk, and entrenching tool combat. Similarly, I'm not talking about missile weapons here at all. Again I could be wrong to do this.

Quote:

If you want to restrict your time period, add a descriptor, don't co-opt an existing definition. Just say "pre-1700 HEMA" for example, which makes it clear to everyone.


That is a good idea I'll adjust accordingly.

Quote:
, it sounds like you are defining anything in your time frame of interest as real, and everything outside your time period of interest as somehow less, or not real. I'm not trying to get you to love other time periods, just to be fair and accurate in your terminology, and not say something general but mean something specific.


I'm sorry, if I conveyed that impression it was only due to my inability with the english language. I hope by making your suggested disclaimer I'll address this issue. The only reason I wouldn't venture much further than say, 1700 is that I'm simply almost completely ignorant of sparring weapons in use for simulating combat in this period, wheras I have been making sparring simulators based on Medieval and Renaissance era weapons for 25 years. My only interest is to make better sparring weapons not to belittle anyone.

Jean

EDIT: Also the epee is already perfect for smallsword anyway so I (perhaps mistakenly) don't see any need for a new sparring weapon to simulate smallsword.

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Vincent Le Chevalier




Location: Paris, France
Joined: 07 Dec 2005
Reading list: 15 books

Spotlight topics: 1
Posts: 871

PostPosted: Tue 24 Apr, 2007 3:28 pm    Post subject:         Reply with quote

Jean Henri Chandler wrote:
Vincent Le Chevalier wrote:
I don't really understand why the flexible steel rapier ends up in generation 2? I mean, Darkwood's blades are as close as on can safely get to a real rapier in my understanding, they are used in full contact sparring, and were rediscovered quite recently if I'm not mistaken... Wouldn't that make them generation 3?


I put them in Generation 2 because they are restricted to thrusting only without heavy equipment.

Part of the criteria for Generation 2 was that the weapons were restricted to thrusting only (like rapier simulators) or cutting only (like the aluminum wasters) without relatively heavy protection.

That is certainly arguable since you could assume that a rapier is only really for thrust, but I believe some HEMA schools for rapier did advocate a certain amount of cutting. Of course that also would depend on which era of rapier we were talking about, I'm no expert on rapier combat but I believe more cutting was done in the earlier part of the period.


Yes, cutting was definitely done in some cases. In fact I was amazed to see how much cutting remains in Thibault...

Anyway I see your point. It just seemed odd to me to see no kind of rapier simulator in generation 3, while the flexible or semi-flexible blades do not seem overly more dangerous, even in cutting, than the Fetherfechters.

Jean Henri Chandler wrote:

I don't understand what you are saying exactly (I don't understand which weapons you are comparing them to or which Generation you feel shinai belongs to? I have them in Generation One because they are not realistic in terms of handling etc. Boffers are very safe too but they are not realistic.


I was comparing Olympic style Foil / Epee / Saber (generation 1) with shinais (generation 2), in fact. I don't see why they are in different generations. To me the trade-off is similar, and the fact that the shinai is used in Japanese martial art does not justify the generation gap in my opinion.

In fact, if I compare the two weapon styles I'm most familiar with:

katana ~ rapier
padded boken ~ flexible rapier (I think padded bokens did exist at a point in some schools?)
shinai ~ foil

Not a 100% association of course, but I hope you get the idea. So that would either make shinai generation 1 or sport fencing weapons generation 2. I'm not sure that's clear but it's late at night in my corner of the world, please forgive the obscurity Wink

On the broader subject of categorization:

It's interesting because when thinking of classes of sparring weapons I split them into three categories as well.
1) Period training tools. They can be used for limited sparring but full-contact is off-limit. Those were interesting in period, because full contact was then... the real thing, and you would have taken more risk in training. Things like Fetherfechters, wasters, perhaps with a little padding, blunt blades with little flexibility
2) Sporting implement. Designed to make sparring almost completely safe, and for competitions where control cannot always be expected from participants. The trade off is the impossibility of being realistic in terms of weight, because in general weight alone can be devastating. Also, some undesirable whippiness. There are sport fencing weapons, shinais, boffers...
3) Modern sparring weapons. They are build to address the need for safe yet realistic full contact sparring. They are not period in general, because they were not needed as much. This would be your generation 3

I think your generation 1 is almost my second category, and your generation 2 my first.

Beware though, that employing the term "generations" could lead to mistaken assumptions. All three have their place and their good use, maybe sorting them into generations is a little pejorative for the tools in generation 1 (seems to imply that they are less sophisticated in a way). And they were not developed sequentially either, except perhaps generation 3 which is quite new. Although I understand that since you are interested in realistic sparring, sport weapons are less important to you.

Great subject anyhow, best of luck with your classification!

--
Vincent
Ensis Sub Caelo
View user's profile Send private message Visit poster's website
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 3:44 pm    Post subject:         Reply with quote

Vincent Le Chevalier wrote:

I was comparing Olympic style Foil / Epee / Saber (generation 1) with shinais (generation 2), in fact. I don't see why they are in different generations. To me the trade-off is similar, and the fact that the shinai is used in Japanese martial art does not justify the generation gap in my opinion.


In looking at it again, I think you are correct. Shinai should be in Generation 1. I'm going to make that change immediately. I'll address your other points after I come back from drill this evening.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Stephen Hand




Location: Hobart, Australia
Joined: 03 Oct 2004
Reading list: 1 book

Posts: 226

PostPosted: Tue 24 Apr, 2007 5:57 pm    Post subject:         Reply with quote

Jean Henri Chandler wrote:
Vincent Le Chevalier wrote:
I don't really understand why the flexible steel rapier ends up in generation 2? I mean, Darkwood's blades are as close as on can safely get to a real rapier in my understanding, they are used in full contact sparring, and were rediscovered quite recently if I'm not mistaken... Wouldn't that make them generation 3?


I put them in Generation 2 because they are restricted to thrusting only without heavy equipment.

Part of the criteria for Generation 2 was that the weapons were restricted to thrusting only (like rapier simulators) or cutting only (like the aluminum wasters) without relatively heavy protection.

That is certainly arguable since you could assume that a rapier is only really for thrust, but I believe some fencing masters for rapier did advocate a certain amount of cutting.


I have to say that this part of the discussion disturbs me. OK, to start with, every rapier master described cuts, but that's a minor point.

Do people really believe that you can't fence safely with accurate replica rapiers? If so, I'm horrified! If you can't fence safely at full speed with a fencing mask, a light to medium weight jacket and a buttoned full weight accurate replica rapier then you have no business bouting. There is nothing in the nature of rapier fencing that makes lighter or more flexible weapons necessary given what I would regard as a basic level of control . If you're saying that you can't fence safely, with both cuts and thrusts, with a full weight, stiff bladed rapier then you are saying that you do not have enough control to fence, full stop!

Safety in historical fencing does not reside with the weapons or the protective equipment. One of the most horrific injuries I've seen was with a padded waster and occurred because of an assumption that the weapon was safe and no control was needed. In my opinion, 90% of your safety derives from your control and that of your opponent. You must know where your sword is at all times and be able to ensure that any impact on an opponent will not happen hard enough to cause injury. This control will also help you to win your bouts. Protective equipment is for those cases where you cannot guarantee absolute control. Protective equipment is a secondary safety feature, not a primary one.

In rare cases where the weapons are larger and the style makes control harder (German longsword springs to mind with its forceful counterattacks leading to binds) then some sort of practice sword might be necessary - and of course practice weapons are useful for beginners, both on a cost basis and because they are still developing their control. Otherwise, if you can't fence at full speed safely with blunt steel weapons then you need to train more. I can't think of a type of single handed sword where competent fencers should need to use anything less than steel blunts. I also don't see why we should accept a level of incompetence that requires less accurate tools.

No bouting tool (the term sparring was never used historically for armed encounters) that is even remotely like a sword is entirely safe. Therefore emphasising protective equipment and bouting tools as the basis for safety is grossly flawed. The only basis for safety is weapon control.

To paraphrase Frederick the Great, control, control, Toujours control!

Cheers
Stephen

Stephen Hand
Editor, Spada, Spada II
Author of English Swordsmanship, Medieval Sword and Shield

Stoccata School of Defence
View user's profile Send private message Visit poster's website
A. Jake Storey II




Location: USA
Joined: 11 Oct 2006
Likes: 1 page

Spotlight topics: 1
Posts: 41

PostPosted: Tue 24 Apr, 2007 7:19 pm    Post subject:         Reply with quote

Stephen Hand wrote:

Safety in historical fencing does not reside with the weapons or the protective equipment. One of the most horrific injuries I've seen was with a padded waster and occurred because of an assumption that the weapon was safe and no control was needed. In my opinion, 90% of your safety derives from your control and that of your opponent. You must know where your sword is at all times and be able to ensure that any impact on an opponent will not happen hard enough to cause injury. This control will also help you to win your bouts. Protective equipment is for those cases where you cannot guarantee absolute control. Protective equipment is a secondary safety feature, not a primary one.


I totally agree with you, Stephen. Though my “classical” experience is more with Karate then European sword fighting, I came across pretty much the same thing. Talking to the older karate-ka, they said that more people have bean knocked out sense the introduction of head protection then before. Karate-ka would stop controlling their punches to the head, and stop blocking strikes to there own head. It is the shock wave of the brain that knocks you out, not contact; so, they get hit, there head gets turned at a high velocity, and... they wake up a few minutes later! Also, more people have broken toes sense the introduction of foot protective gear! The pads are good for beginners, but inhibit real growth. Control beats all else!

I hope this helps.

Only you can deny yourself your rights.
Too ignore the rights of others, is to forfeit you own!
Thereby, in your crime, YOU bring Justice on your own head!!!
View user's profile Send private message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 7:22 pm    Post subject:         Reply with quote

Yeah I have a very different philosophy than you do Stephen, I believe if you are always 'pulling' your strikes, OR thrusts in training, then you are not going to learn to fight with these weapons. I don't buy this concept (which I have heard many times) that you have to always control your strikes so that they do not land hard. Of course you are using control, but the principle purpose is to displace your opponents attacks and hit them. Hitting them soft is secondary, it is often done as a matter of courtesy, if you have the time and the luxury. But sometimes you don't and you need to be able to take it to that level or your will never learn true timing of a real fight. Or reach for that matter. Certainly we often do free-play as opposed to true sparring, which is lighter impact and slower speed. But I personally believe you do have to spar flat-out if you want to learn. I do not want to train myself in the habit of pulling every strike.

It's quite possible that is because my primary focus has been 15th century longsword.

We do use flexible Steel rapiers in our group, we have used them for five years. They are almost completely safe IMO for thrusting, if you use a mask and a gorget, but I do not think a steel rapier is safe for full-force, full-contact cutting. For one thing, in a fencing mask, you have very little protection for the side of the head, and essentially none for the back of the head. Joints and hands are extremely vulnerable. So cutting at full speed is just out. We use them for thrust-work pretty much exclusively, with a little draw-cutting.

Now again, whether you even believe in full-contact sparring is a separate issue. If you do not, certainly there is no need for new training weapon. Frankly I think the rapier and smallsword simulators are much closer to being ideal for training purposes than longswords, earlier single swords, messers, falchions, daggers or greatswords.

But for something like an arming or cut-thrust sword you might use for I33, no metal simulator is safe unless you are, again as you have suggested, eschewing full-speed sparring. Free play yes, sparring no.

Anyone who believes incidentally that full-speed, full-contact sparring is not necessary to learn how to really fight is welcome to show up at our practice at the corner of Gallier and Chartres streets in the 9th Ward, New Orleans, every Saturday at 10:00 AM. As long as you sign the release form, you can try out your technique on us. You can even bring a video camera to record your victories.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print


Last edited by Jean Henri Chandler on Tue 24 Apr, 2007 10:09 pm; edited 5 times in total
View user's profile Send private message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 7:24 pm    Post subject:         Reply with quote

A. Jake Storey II wrote:


I totally agree with you, Stephen. Though my “classical” experience is more with Karate then European sword fighting, I came across pretty much the same thing. Talking to the older karate-ka, they said that more people have bean knocked out sense the introduction of head protection then before. Karate-ka would stop controlling their punches to the head, and stop blocking strikes to there own head. It is the shock wave of the brain that knocks you out, not contact; so, they get hit, there head gets turned at a high velocity, and... they wake up a few minutes later! Also, more people have broken toes sense the introduction of foot protective gear! The pads are good for beginners, but inhibit real growth. Control beats all else!

I hope this helps.


IMO thats why the Karate guys got stomped in the UFC. The guys who did the most realistic sparring did the best. Everyone who did forms only got wiped out.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Stephen Hand




Location: Hobart, Australia
Joined: 03 Oct 2004
Reading list: 1 book

Posts: 226

PostPosted: Tue 24 Apr, 2007 9:14 pm    Post subject:         Reply with quote

Dear Jean,

Why do you equate full speed with full force? They are not one and the same. I swing steel swords the same speed that I swing the basket hilted shinai that our beginners train with. I just choose to hit a bit softer.

How hard do you have to hit someone to seriously hurt them. Not very hard actually. With a rapier thrust you don't have to thrust very hard at all to cleanly pierce flesh. With an arming sword or basket hilted sword, if you swing too fast you don't co-ordinate your arm and your body, and your cut will actually be less effective

I know for a fact that accurate replica steel rapiers are very safe for both cutting and thrusting at full speed if you exercise control because I and my students have done this for years. In 2001 I won the rapier fencing tournament at Western Martial Arts Workshop in New York. I was using an accurate replica rapier which was considerably heavier and stiffer than anything else being used in the entire competition. Nobody commented that I hit too hard and certainly nobody I defeated complained that I was fencing at less than full speed. Incidentally the weapon I used was outside the specs for the competition but the person who inspected the weapons before the comp. said "you know I shouldn't let you use this, but I've seen you fence, so go on."

You stated, "But for something like an arming or cut-thrust sword you might use for I33, no metal simulator is safe unless you are, again as you have suggested, eschewing full-speed sparring."

I did not suggest eschewing full speed. I always bout at full speed. You might care to look at the video on Maestro Sean Hayes site of his I.33 demonstration bout with me at Western Martial Arts Workshop in 2005. It can be found at http://www.northwestacademyofarms.com/ Click on seminars and you will find it about a third of the way down on the right side of the page. Unfortunately the video was taken with a phone and is not that high resolution, but you can get an idea of the speed. We had never bouted together in the I.33 system, were using correct historical weight steel arming swords and as you can see we don't hold anything back. At no point did I feel like I was in danger of being hurt and neither of us ended with a mark on us. Control!

I am constantly told that I can't do what I do every training session, which is to fight at full speed with attacks launched strong enough to be lethal, but controlled so that they land light enough not to do damage. I can and not only do I do it, but I insist that my students do it too.

Of course the other side of the coin is that if you're fighting with weapons that are light enough to allow full force hits then you can hardly fail to distort technique. Frankly I don't understand how anyone who has been taught proper technique could ever consider fighting full force ever again. I recall Bob Charron who won a great many SCA tournaments before turning to WMA, telling me that he could never go back to the SCA because if he swung a rattan cane full force the way he's trained to swing steel swords in test cutting, he's scared he'd kill someone.

The argument that you need full force bouting is valid for things like boxing where an important attribute is to be able to take damage and continue fighting. The argument collapses with arts where one good hit should end the bout. I can train to box after being hit a few times. It's a little harder to train to continue fencing with a limb removed.

So, in short, please don't try to tell me I don't or can't fence at full speed. I can and I do. I can do this with steel swords of correct weight and stiffness and land attacks sufficiently soft so as not to do any damage. I will not allow anyone who can't do this to fence with steel swords in my school. If you can't start an attack at full speed and then land it softly once you are sure it will hit then you have no place fencing.

Cheers
Stephen

Stephen Hand
Editor, Spada, Spada II
Author of English Swordsmanship, Medieval Sword and Shield

Stoccata School of Defence
View user's profile Send private message Visit poster's website
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 9:32 pm    Post subject:         Reply with quote

Stephen,

For the record, your fencing video seems to be missing from that website, so I cannot comment on that.

I will say that I have met, fenced with, and trained with a couple of the best longsword fencers in the world and I never met anybody who could spar full speed with steel blunts safely. None of them had the title of maestro however.

I'm not interested in turning this into a debate between the way I fence and the way you fence. If we ever meet in the same place I'd be delighted to put it all to the test with arming sword, longsword, messer, staff or dagger. We will have to use shinai or padded wasters though because I don't pull my strikes.

But as much as I might like endlessly debating the merits of your theories of "control" versus mine, the bottom line is simple:

If you feel that there is no need for better training simulators, then you by definition have no interest in an improved sparring weapon. So there really isn't much to talk about. You disagree with the need for specialized sparring weapons beyond what already exists. Since you have stated that you can bout full speed with steel blunts without the slightest danger of injury, I can't imagine why you would ever need anything else.

My idea of a typology, and the subject of this thread are aimed at that I think large subset of HEMA practitioners who are less than perfect fencers, cannot bout full speed with steel blunts safely, and are in fact interested in new training simulators.

I'm not telling you what you can or cannot do, I really don't care how you spar. I know for a fact that hundreds of HEMA practitioners use either padded wasters, modified shinai, nylon wasters, or aluminum wasters because they feel they need training simultors which are safer than steel blunts. I am trying to do something for these people, and for myself. If you don't agree thats perfectly fine, keep doing whatever you want to do. I would never tell you that you had to use a safer training simulator unless I was fighting you myself.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Jean Henri Chandler




Location: New Orleans
Joined: 20 Nov 2006

Spotlight topics: 1
Posts: 1,420

PostPosted: Tue 24 Apr, 2007 9:49 pm    Post subject:         Reply with quote

Stephen Hand wrote:
Of course the other side of the coin is that if you're fighting with weapons that are light enough to allow full force hits then you can hardly fail to distort technique.


I am compelled to remind you that, as stated in the Typology above, the Third Generation sparring weapons are all of accurate weight and balance. The padded wasters we use are of identical weight and balance of real swords. To the ounce, and to the centimeter.

I will also comment that I own several sharps including an Albion blade and have done a rather immense amount of test cutting on all manner of materials including things like pigs feet, chickens and turkeys from the supermarket, and etc. I do not agree with the assumption that a very light hit will always cause an incapacitating or crippling injury. A two inch thrust can kill, but it has to hit a vital area (or pierce the rib cage or skull) and in most cases, will not necessarily kill instantly. Not before your opponent strikes back and gives you a mortal wound of your own as did in fact often happen in rapier and smallsword duels historically.

If you are pulling your strikes you are going to mess up your follow-through. This is a huge problem I have seen with people who are used to pulling their strikes when they try to cut, they sort of flinch at the target and either mess up their edge alignment or fail to follow through. I saw it happen tonight in fact with a guy who has an olympic style saber background.

A lethal cut requires proper follow-through at a suitible velocity. You aren't going to learn to do that in a combat situation if you are pulling your strikes constantly or sparring at less than full-speed.

Jean

Books and games on Medieval Europe Codex Integrum

Codex Guide to the Medieval Baltic Now available in print
View user's profile Send private message
Lancelot Chan
Industry Professional



Location: Hong Kong
Joined: 24 Oct 2003
Likes: 2 pages

Posts: 1,307

PostPosted: Tue 24 Apr, 2007 10:41 pm    Post subject:         Reply with quote

It maybe strange that I propose such an idea as a padded sword maker but it was Bill Grandy's sparring videos that first enlightened me that one could spar with blunt with almost full speed and still safe.

With blunt
http://www.ericwargo.com/sword/bouts/bgvew5_3_06s.mov

With RSW
http://www.ericwargo.com/sword/bouts/sbgvjh10_19.mov

The difference in speed, in my opinion, is about 10% only and I would like to give Bill my praise that the speed he used with blunts was high enough to defeat most of us here in Hong Kong. He showed a very sophisticated degree of swordsmanship in speed and control.

I also agree with Stephen that full speed is not equal to full force and thrusts take virtually no force to penetrate.

Sometimes I explain to my students with an analogy. Unlike blunt weapons like staff that required certain hitting power in order to do its' work, forcing the user to generate a lot of power in each strike, sharp swords are like "rechargable batteries" where one already stored the force in the edges during the sharpening. I sharpen my own swords and it was really quite exhausting. Thus, in combat, one doesn't have to put a lot of forces in the strike for it was already "charged" and once the blow connected with good blade alignment, an tremendous force stored in the edges will work itself through the target. Of course the "charged force" will deplete itself along the battles through hitting something hard, like shield rim or armor or sword and once the "charged force" was totally depleted, it was not much different from a staff where each strike would require the user to put more force into each blow in order to inflict enough damage.

Ancient Combat Association —http://www.acahk.org
Realistic Sparring Weapons — http://www.rsw.com.hk
Nightstalkers — http://www.nightstalkers.com.hk
View user's profile Send private message Visit poster's website
Ira P





Joined: 14 Apr 2006
Reading list: 12 books

Posts: 1

PostPosted: Wed 25 Apr, 2007 3:57 am    Post subject:         Reply with quote

This is one of my first post here, so be a little gentle (God, I'm going to get so owned)...

Anyway, based on my earlier experience (I go to Stoccata in Sydney for more than a year now) it seems to me that it is far easier for me to not pull the blade when it hits. It's just so much easier to just allow the blade to do whatever it wants, which is to land, smack, as hard as it can upon an opponent. When I first began people complained that I hit them too hard with my modified shinai. It took me a while to gain the control needed to hit soft (which is why I waited a long time before considering a blunt blade).

Also, who said that you've got to kill your opponent to win a fight? From what I've heard, there were duels where the one who first "drew blood" wins. Besides that, if I hit my opponent and he didn't hit me, no matter where and how deep the cut is I still would have the advantage since he would be in pain or losing blood and that alone would affect his performance.

Finally, you don't need to be able to cut newspapers to cut flesh.

I hope I don't sound like an idiot, but that's my two cents.
View user's profile Send private message


Display posts from previous:   
Forum Index > Off-topic Talk > Sparring Weapon Typology (proposed)
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum