Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Question about the Albion Ritter? Reply to topic
This is a standard topic  
Author Message
Barrett Hiebert





Joined: 22 Sep 2006

Posts: 111

PostPosted: Thu 25 Jun, 2020 5:08 am    Post subject: Question about the Albion Ritter?         Reply with quote

Good day,

Anyone that has an Albion Ritter, are you able to chime in if the blade can be used two handed as Roland Warzecha says from all positions?

Best regards,

Barrett Hiebert
View user's profile Send private message
Ryan Renfro




Location: Reno, NV
Joined: 27 Dec 2006
Reading list: 5 books

Posts: 119

PostPosted: Thu 25 Jun, 2020 12:56 pm    Post subject:         Reply with quote

Is the underlined supposed to be a link? I can't find his comments to which you are referring.
View user's profile Send private message
Barrett Hiebert





Joined: 22 Sep 2006

Posts: 111

PostPosted: Thu 25 Jun, 2020 11:24 pm    Post subject:         Reply with quote

Ryan,

See here:

https://www.youtube.com/watch?v=yacFlQjtkTU

Best regards,

Barrett Hiebert
View user's profile Send private message
David Kite




Location: Clinton, IN USA
Joined: 20 Feb 2004

Posts: 106

PostPosted: Fri 26 Jun, 2020 11:21 am    Post subject: Re: Question about the Albion Ritter?         Reply with quote

Well, any single-hand sword can be used with two hands, so to that extent, I think he is correct. I'm not convinced that that is the intended function of that pommel design, but I think his idea is at least reasonable.

To be more convinced of his grip, I would need to see him swing with some real measure of force, which I did not see in that video. Seeing him strike against a pell would be even better.

David Kite
ARMA in IN
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

PostPosted: Fri 26 Jun, 2020 12:55 pm    Post subject:         Reply with quote

It’s also of note that the sword the Ritter hilt is based off of has a 38 inch blade while the Ritter itself has a 32 inch blade. Those are really 2 different animals.

I am also.not convinced in the two handed premise.
View user's profile Send private message
J.D. Crawford




Location: Toronto
Joined: 25 Dec 2006

Spotlight topics: 1
Posts: 1,903

PostPosted: Fri 26 Jun, 2020 3:00 pm    Post subject:         Reply with quote

I had one for a while. The grip is longer than most historical examples of this type, but still I did not find it to be particularly two-handy. The pommel is designed more to couch the fist, and a second hand is not really necessary. It's not that heavy.
View user's profile Send private message Visit poster's website
Ryan Renfro




Location: Reno, NV
Joined: 27 Dec 2006
Reading list: 5 books

Posts: 119

PostPosted: Fri 26 Jun, 2020 7:43 pm    Post subject:         Reply with quote

That's an interesting take. Thanks for bringing it to my attention. The pistol grip on the pommel as described does certainly add a degree of control to the cut. I feel like it is a bit easier to control the edge alignment with it and cutting to Langen Ort is easier than with a single hand. One notable difference is that I don't feel like I'm able to apply much if any power with the left hand like I would be able to with a longsword. Also, just cutting a few Oberhaus (I guess that should be Oberhaue? Oh the Genglish.) left the joint between the metacarpal and the proximal phalangeal bones sore. At the end of the cut the peened prong of the pommel would rotate into that part of my thumb. Perhaps this could be corrected by changing some of the mechanics or gripping it slightly higher on that metacarpal, but that changes the angle of the hand.

The grip is actually long enough for me to get the my thumb and index finger around the bottom. With the curved base of the pommel this seems to allow the same gains as regards to control but also to apply some force with the left hand when cutting.

I've always thought that type XI was much better suited to fighting from horseback than on foot, particularly the lengthier examples, so I'm not sure two handed use with the driving force behind the design. Also, the bade on the Ritter is about 33 3/4".

Kind Regards,

Ryan
View user's profile Send private message
J.D. Crawford




Location: Toronto
Joined: 25 Dec 2006

Spotlight topics: 1
Posts: 1,903

PostPosted: Fri 26 Jun, 2020 9:46 pm    Post subject:         Reply with quote

I definitely agree with the horseback hypothesis.

I had one of these made custom, based on several historical examples: http://myArmoury.com/talk/files/sdscf6655_582.jpg

The blade is nearly 4" longer than the Ritter, the grip is shorter, and it handles like a dream for long sweeping cuts.
View user's profile Send private message Visit poster's website
Paul Hansen




Location: The Netherlands
Joined: 17 Mar 2005
Likes: 5 pages

Posts: 845

PostPosted: Sat 27 Jun, 2020 3:47 am    Post subject:         Reply with quote

Jeremy V. Krause wrote:
It’s also of note that the sword the Ritter hilt is based off of has a 38 inch blade while the Ritter itself has a 32 inch blade. Those are really 2 different animals..


I'm not sure that's relevant.

Geibig lists this as his hilt type 13, which is quite common, and which can be paired with a type 10, 12 or 13 blade which can be anything between 91 and 100 cm long. This makes the Ritter at 86cm indeed slightly shortish for the type.
View user's profile Send private message
Barrett Hiebert





Joined: 22 Sep 2006

Posts: 111

PostPosted: Thu 02 Jul, 2020 2:58 am    Post subject:         Reply with quote

Hey,

Thanks all for the thoughts. I’ve let that tangential thought fall to the wayside. Please disregard. Thought better of it.

Best regards,

Barrett Hiebert
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Question about the Albion Ritter?
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum