| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Piotr H. Feret, Graham Shearlaw, Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary (View All Donors) |
| Author |
Message |
W. Schütz
Industry Professional
|
 Posted: Tue 24 Jan, 2006 7:57 am Post subject: Functional and historic ways of attaching points.. |
 |
|
I would like to attach some points/leatherchords to my pourpoint for the legs and the shoulders. Is there a smart way of doing this that does not tear the fabric apart after some use? Tips appriciated.
Gentes scitote,
vicine sive remote,
quod claret Suecia
plebeque militia.
|
|
   |
 |
Gordon Clark
|
| Posted: Tue 24 Jan, 2006 1:51 pm Post subject: Re: Functional and historic ways of attaching points.. |
|
|
| W. Stilleborn wrote: | | I would like to attach some points/leatherchords to my pourpoint for the legs and the shoulders. Is there a smart way of doing this that does not tear the fabric apart after some use? Tips appriciated. |
Use an awl to push a hole through the fabric, make it maybe 1/4 inch in diameter, then a thread and needle to "button hole" stitch around the edges of the hole. Two of these close together, and you can thread the point through. The hole won't encourage ripping or unraveling since you don't cut or mangle the fabric, and the stitching will both keep it open and add strength.
|
|
|
|
|
Chuck Russell
|
| Posted: Tue 24 Jan, 2006 3:15 pm Post subject: |
|
|
gordon has it dead on!
if your hanging armour and you think the weight is a factor on your button hole stitch, add a piece of leather with 2 holes on the inside of your garment. it doesnt have to be attached, just when u put the lace thru the point hole, put it thru the leather also and then back out. leather only needs to be like 1 inch by 2 inch rectangle etc.
|
|
  |
|
W. Schütz
Industry Professional
|
| Posted: Wed 25 Jan, 2006 2:33 pm Post subject: |
|
|
Great replies. I had a similar plan for the leather, and with the added stitching-method it will be a killer i bet.
Danke!
Gentes scitote,
vicine sive remote,
quod claret Suecia
plebeque militia.
|
|
|
|
|
Jessica Finley
Industry Professional
Location: Topeka, Kansas Joined: 29 Dec 2003
Posts: 110
|
| Posted: Thu 26 Jan, 2006 5:09 pm Post subject: |
|
|
|
Another strengthening idea would be to insert a small metal ring over the awl'ed hole, and to stitch that as part of the buttonhole stitch. This will help prevent wear and tear on the fabric.
|
|
 |
|
Chuck Russell
|
| Posted: Thu 26 Jan, 2006 6:07 pm Post subject: |
|
|
| Jessica Finley wrote: | | Another strengthening idea would be to insert a small metal ring over the awl'ed hole, and to stitch that as part of the buttonhole stitch. This will help prevent wear and tear on the fabric. |
theres a 16thc arming jacket with this method. but its done thruout the jacket for ventalation.
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2026 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic