| Author |
Message |
|
Mike Jia
Industry Professional
Location: Canberra Joined: 30 Sep 2013
Posts: 53
|
 Posted: Wed 30 Jul, 2014 9:59 pm Post subject: who can finish an Albion bare blade |
 |
|
|
I've got an Albion X bare blade in the pipeline, and I was wondering if there's anyone in the states that can establish an edge geometry, sharpen the thing, and give it a basic polish? I'd like someone whose backlog isn't too long (so that kind of rules out Ernie at Yeshua's swords..)
|
|
  |
 |
Shahril Dzulkifli
|
| Posted: Thu 31 Jul, 2014 5:13 am Post subject: Who can finish an Albion bare blade |
|
|
I am not sure if there's someone here in this forum who can finish your blade, Mike.
“You have power over your mind - not outside events. Realize this, and you will find strength”
- Marcus Aurelius
|
|
|
|
|
|
Tim Lison
|
| Posted: Thu 31 Jul, 2014 8:52 am Post subject: |
|
|
|
Try Christian Fletcher...He might be able to do it...
|
|
|
|
|
|
Christian Fletcher
Industry Professional
|
| Posted: Thu 31 Jul, 2014 11:42 am Post subject: |
|
|
I actually sort of suck at blade finishing :\
Christian Fletcher
www.christianfletcher.com
|
|
 |
|
|
Brian Nelson
Location: Houghton, MI Joined: 17 Mar 2012
Posts: 43
|
| Posted: Thu 31 Jul, 2014 12:02 pm Post subject: |
|
|
|
I think Leo Todeschini (Todd's Stuff) could do it as he makes some of the blades for his commissions.
|
|
 |
|
|
Jeffrey Faulk
|
| Posted: Thu 31 Jul, 2014 12:08 pm Post subject: |
|
|
Ernie is certainly one of the better known guys for this. That backlog is a suck, though.
However may I suggest posting on Sword Buyer's Guide? There are a number of amateur blade-smith types on that board who may be happy to take you up on that project.
|
|
|
|
|
Dean F. Marino
Location: Midland MI USA Joined: 24 Aug 2011
Posts: 229
|
| Posted: Thu 31 Jul, 2014 1:15 pm Post subject: |
|
|
| Jeffrey Faulk wrote: | Ernie is certainly one of the better known guys for this. That backlog is a suck, though.
However may I suggest posting on Sword Buyer's Guide? There are a number of amateur blade-smith types on that board who may be happy to take you up on that project. |
Ditto - and a great number of them are FAR from amateurs :).
In edhil, hai edhil. In edain, hai edain.
|
|
|
|
|
|
Tim Lison
|
| Posted: Thu 31 Jul, 2014 1:51 pm Post subject: |
|
|
| Christian Fletcher wrote: | | I actually sort of suck at blade finishing :\ |
Good to know... I guess you should stick to scabbards! :lol:
|
|
|
|
|
|
Raymond Deancona
|
| Posted: Thu 31 Jul, 2014 4:31 pm Post subject: |
|
|
You can try Ollin sword design. They did some work for me several years ago.
http://ollinsworddesign.com/
though, like everyone else, they may also be swamped with work.
|
|
|
|
|
|
Mike Jia
Industry Professional
Location: Canberra Joined: 30 Sep 2013
Posts: 53
|
| Posted: Thu 31 Jul, 2014 5:10 pm Post subject: |
|
|
|
thanks for the responses, Jeffrey, I got in touch with someone on SBG who seems up to the task :)
|
|
|
|
|
David Lewis Smith
|
| Posted: Fri 01 Aug, 2014 5:39 am Post subject: |
|
|
Rex D MetCalf could probably do it.
He has this odd way of looking at a thing and knowing how to do it right.
David L Smith
MSG (RET)
|
|
|
|
|
Jonathan Blair
|
| Posted: Fri 01 Aug, 2014 11:11 am Post subject: |
|
|
Baltimore Knife and Sword did mine.
"Think not that I am come to send peace on earth: I came not to send peace, but a sword." - The Lord Jesus Christ, from The Gospel According to Saint Matthew, chapter x, verse 34, Authorized Version of 1611
|
|
|
|
|
|
|
This is a standard topic