Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Advice on working titanium plate Reply to topic
This is a standard topic  
Author Message
Timmy M




Location: England
Joined: 24 Jul 2015

Posts: 1

PostPosted: Fri 24 Jul, 2015 6:13 am    Post subject: Advice on working titanium plate         Reply with quote

Hey all, new here, i'm currently fighting for Britain in HMB tournaments and i've got hold of some titanium plate (0.6, 1, 1.2 and 1.6mm). I'm looking to hybrid some bits of my armour and i'm currently working on my splint legs, the left leg has taken a pounding from doing 1v1 fights and i'm wanting to reinforce it with a 1mm piece of plate over the most troublesome area. I was thinking of keeping the plate as it was, removing the splints on the inside and just forming it to the shape of my thigh.
I knew it'd be tricky but it's proving harder than i thought, any advice from any of you? Even a point in the right direction for different resourses/forums would be greatly appreciated
View user's profile Send private message Send e-mail
Joshua Waters




Location: South Carolina
Joined: 15 Dec 2013

Posts: 36

PostPosted: Fri 24 Jul, 2015 11:54 am    Post subject:         Reply with quote

Hey Timmy, how to go about shaping the titanium depends on what metal working tools and equipment you have to work with, and your experience level on making armor. If you can provide this information it would be a great help. Titanium is hard to work on usually because of it's properties, you can crack it if you go about shaping it wrong, and you can ruin it's metallurgical structure if you heat the metal improperly if you try and work the metal hot.
I would also recommend you go ask the people on The Armour Archive, there are a great many armorers who can give you good advice on working with titanium. Here is the link: http://forums.armourarchive.org/phpBB3/ The best place to ask would be the armor design and construction sub forum.

Benedictus Dominus Deus meus.
Qui docet manus meas ad prælium, et digitos meos ad bellum.

Deus vult!
View user's profile Send private message
David Lewis Smith




Location: NC
Joined: 26 Aug 2003
Likes: 2 pages

Posts: 484

PostPosted: Sat 25 Jul, 2015 12:17 pm    Post subject:         Reply with quote

I think if you go to http://forums.armourarchive.org/phpBB3/index.php and do a search for titanium you will find a whole bunch of stuff about working it. I have some titanium armour, it works a lot like steel, but not the same. cops for instance have to be worked hot, and titanium gives off some nasty vapors. Nasty as in, the next morning I will be riffling though your pockets for lose change.


look up mrks that is the name of the guy that makes my armor on armour archive, he is really friendly and can help you out a lot more than I can. Here is a search of mrks and ti,

http://forums.armourarchive.org/phpBB3/search...mit=Search

David L Smith
MSG (RET)
View user's profile Send private message Send e-mail


Display posts from previous:   
Forum Index > Off-topic Talk > Advice on working titanium plate
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2018 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum