Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Bronze age sword recreations, anyone in America buy these? Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Christopher B Lellis




Location: Houston, Texas
Joined: 01 Dec 2012

Posts: 268

PostPosted: Tue 04 Jun, 2013 10:26 pm    Post subject: Bronze age sword recreations, anyone in America buy these?         Reply with quote

I actually came across this gentlemen's page by chance, I was studying bronze age history "well internet studying" and happened to come across a bronze sword website. Low and behold, it's a man who makes and sells bronze swords.

Obviously, I immediately perked up. Never heard of this guy nor have I seen his work posted on this website.

http://www.bronze-age-swords.com/index.htm

Based in the UK. Has anyone here by chance bought this mans swords before, particularly in the U.S? How did dealing with him turn out? Were you happy with the sword?

Btw, I had no idea bronze swords were so shiny, I have only ever seen ancient antiques. Newly forged "or casted?" they are beautiful. I had no idea.


Last edited by Christopher B Lellis on Tue 04 Jun, 2013 10:56 pm; edited 1 time in total
View user's profile Send private message
Mark Kalina





Joined: 23 Aug 2006
Likes: 3 pages

Posts: 11

PostPosted: Tue 04 Jun, 2013 10:40 pm    Post subject:         Reply with quote

I ordered an Ewart Park sword from Mr. Burridge; it arrived (in California) in a timely manner. Contact was easy and prompt via email. There was a minor problem with the sword due to the shipper, but it was resolved in a very helpful manner, again via email.

The sword is very well made, lovely to look at and a very good cutter (for light cutting; I have not tried any heavy cutting with it.)

For myself, I can say that I am very happy with both the service and the sword I got.
View user's profile Send private message
Christopher B Lellis




Location: Houston, Texas
Joined: 01 Dec 2012

Posts: 268

PostPosted: Tue 04 Jun, 2013 10:54 pm    Post subject:         Reply with quote

Mark Kalina wrote:
I ordered an Ewart Park sword from Mr. Burridge; it arrived (in California) in a timely manner. Contact was easy and prompt via email. There was a minor problem with the sword due to the shipper, but it was resolved in a very helpful manner, again via email.

The sword is very well made, lovely to look at and a very good cutter (for light cutting; I have not tried any heavy cutting with it.)

For myself, I can say that I am very happy with both the service and the sword I got.


That's good to hear, makes me want one of his swords even more now. Big Grin
View user's profile Send private message
Robert Muse




Location: Washington
Joined: 28 Sep 2009
Likes: 1 page

Posts: 494

PostPosted: Tue 04 Jun, 2013 11:29 pm    Post subject: sword         Reply with quote

Neil's work is outstanding, I had one of his swords until I had to start down sizing. He is the only one to make them as authentic as possible using old methods. Great, fast responsive swords, plus Neil is a real gentleman to deal with.

Robert
View user's profile Send private message
Geoff Wood




Location: UK
Joined: 31 Aug 2003

Posts: 634

PostPosted: Wed 05 Jun, 2013 12:23 am    Post subject:         Reply with quote

I have a Ewart park from Mr Burridge. Lovely sword and honest decent man to deal with.

Geoff
View user's profile Send private message
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,641

PostPosted: Wed 05 Jun, 2013 2:14 am    Post subject:         Reply with quote

Neil's swords are currently the closest anyone today can get to handling the original items.
View user's profile Send private message
David Lewis Smith




Location: NC
Joined: 26 Aug 2003
Likes: 4 pages

Posts: 506

PostPosted: Wed 05 Jun, 2013 4:28 am    Post subject:         Reply with quote

I have one as well that is still in project stage but it is one of the finest swords I own
David L Smith
MSG (RET)
View user's profile Send private message Send e-mail
Eric Sherwin




Location: Texas
Joined: 31 Oct 2006
Likes: 1 page

Posts: 31

PostPosted: Wed 05 Jun, 2013 7:36 am    Post subject:         Reply with quote

I own two swords by Neil and I love them. He's great to do business with.
View user's profile Send private message
Ian Hutchison




Location: Louisiana / Nordrhein-Westholland
Joined: 27 Nov 2007

Posts: 626

PostPosted: Wed 05 Jun, 2013 9:40 am    Post subject:         Reply with quote

Mr. Burridge's work is well known here. He's knowledgeable and makes a good product. I was very happy with the piece I owned.
'We are told that the pen is mightier than the sword, but I know which of these weapons I would choose.' - Adrian Carton de Wiart
View user's profile Send private message
Matthew Amt




Location: Laurel, MD, USA
Joined: 17 Sep 2003

Posts: 1,462

PostPosted: Wed 05 Jun, 2013 10:06 am    Post subject:         Reply with quote

Oh, yes, we talk about Neil quite a bit here! Just do a search on "Burridge", for starters. He also has a bit of a fan club on the Bronze Age Center, http://z8.invisionfree.com/Bronze_Age_Center/index.php?

I must have 10 or 12 of his weapons, all superb, though I confess I have not yet finished them all. (Too many projects!)

There are actually a couple other places to get bronze weapons, notably Bronze Age Foundry. From what I hear, he also does good work. Certainly you should shop around a bit, but you really can't go wrong ordering something from Neil.

So join the bronze sword club! You know you want to.

Matthew
View user's profile Send private message Visit poster's website
Matt Lentzner




Location: Silicon Valley, CA
Joined: 22 Jul 2008
Likes: 1 page
Reading list: 2 books

Posts: 30

PostPosted: Wed 05 Jun, 2013 10:25 am    Post subject:         Reply with quote

Interesting that the swords don't have tangs. The handles are in one piece with the blade. Is this a feature of the casting process? Also seems a waste of very expensive bronze.
View user's profile Send private message Send e-mail
Jeffrey Faulk




Location: Georgia
Joined: 01 Jan 2011

Posts: 578

PostPosted: Wed 05 Jun, 2013 11:27 am    Post subject:         Reply with quote

Matt Lentzner wrote:
Interesting that the swords don't have tangs. The handles are in one piece with the blade. Is this a feature of the casting process? Also seems a waste of very expensive bronze.


This is historical. What you're seeing as the 'handle' is a 'full tang' or 'full profile tang', often with a flange around the edges that the grip material fits within (this varies by sword though).

Bronze is softer than steel by a fair bit, although you can work-harden it to a good degree. Nevertheless, if they had a tang as thin as a steel sword, they would snap off quickly enough in short order. There are a number of bronze pieces with thin tangs, but not very many; they probably date to the transitional period between bronze and iron, IIRC.

As such, a full tang is not a waste of bronze by any means, and while it was indeed expensive (pretty much all metal was back then, when you think about it) the extra material really isn't all that much compared to the overall mass of the sword. Those who could purchase such wouldn't have blinked at having to throw an extra goat or two into the deal :P

Although your query does raise the question of whether with modern bronze alloys we could do a tang like steel swords have... but with the cost of bronze versus steel, it'd be something like 2x-4x as much for the sword, never mind the tang size!
View user's profile Send private message
Matthew Amt




Location: Laurel, MD, USA
Joined: 17 Sep 2003

Posts: 1,462

PostPosted: Wed 05 Jun, 2013 1:19 pm    Post subject:         Reply with quote

Matt Lentzner wrote:
Interesting that the swords don't have tangs. The handles are in one piece with the blade. Is this a feature of the casting process? Also seems a waste of very expensive bronze.


It's not a "waste", it's using the metal as needed. As Jeffrey says, if you can't afford the handle, you can't afford the blade! Plus, most bronze weapons ended up in graves or votive deposits, so they certainly didn't have the same ideas about "waste" or recycling that we do today. Huge numbers of bronze implements were made for the sole purpose of being put in the ground--to those folks, that was need and proper usage, not waste.


Jeffrey Faulk wrote:
Although your query does raise the question of whether with modern bronze alloys we could do a tang like steel swords have... but with the cost of bronze versus steel, it'd be something like 2x-4x as much for the sword, never mind the tang size!


Well, most modern bronze alloys are not like ancient high-tin alloys, in fact most have little or no tin at all. They have very different mechanical properties, the same way that many steel alloys are not suitable for swords. So I don't know if there is a modern bronze which would be *better* for swords than ancient bronze. But the cost wouldn't be a problem--like a steel sword, most of the cost is in the labor, not the materials. Neil just gets copper and tin and mixes his own alloys, whatever he needs to match the originals. And even there, the cost of a high-end bronze sword (like one of Neil's) is a fraction of the cost of a high-end hand-forged steel sword.

Yea, bronze!

Matthew
View user's profile Send private message Visit poster's website
Chad Arnow
myArmoury Team


myArmoury Team

PostPosted: Wed 05 Jun, 2013 3:40 pm    Post subject: Re: Bronze age sword recreations, anyone in America buy thes         Reply with quote

Christopher B Lellis wrote:
Never heard of this guy nor have I seen his work posted on this website.


Really? Happy A few minutes with the Search button yielded these. I'm sure there are more.

http://www.myArmoury.com/talk/viewtopic.php?t=27984
http://www.myArmoury.com/talk/viewtopic.php?t=26974
http://www.myArmoury.com/talk/viewtopic.php?t=22062
http://www.myArmoury.com/talk/viewtopic.php?t=21805
http://www.myArmoury.com/talk/viewtopic.php?t=21096
http://www.myArmoury.com/talk/viewtopic.php?t=17935
http://www.myArmoury.com/talk/viewtopic.php?t=16186
http://www.myArmoury.com/talk/viewtopic.php?t=8955

Happy

ChadA

http://chadarnow.com/
View user's profile Send private message Send e-mail Visit poster's website
Matt Corbin




Location: U.S.A.
Joined: 16 Jan 2004
Likes: 9 pages
Reading list: 12 books

Posts: 336

PostPosted: Wed 05 Jun, 2013 4:42 pm    Post subject:         Reply with quote

And of course Kirk Spencer's stunning Mindelheim recreation which started life as one of Neil's castings:

http://www.myArmoury.com/talk/viewtopic.php?t...p;start=20

“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
View user's profile Send private message
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 802

PostPosted: Wed 05 Jun, 2013 5:49 pm    Post subject:         Reply with quote

I have a couple.... I can't add much to what anyone has already said, but basically, if you want a reproduction of a bronze age sword, Neil is who you go to. There are other producers of bronze swords, but they miss the mark in terms of weight and handling (really, these other bronze swords are boat anchors, for the most part. Neil's actually handle like real swords, which they are).

Neil is the King/Pharaoh/Chieftain of the modern reproduction bronze sword.

David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
Matt Lentzner




Location: Silicon Valley, CA
Joined: 22 Jul 2008
Likes: 1 page
Reading list: 2 books

Posts: 30

PostPosted: Wed 05 Jun, 2013 6:16 pm    Post subject:         Reply with quote

Do they handle as well as iron/steel swords?

I ask because it occurred to me that without a tang you can't really have a pommel. This would make the sword tip heavy (I would think). I do see that some of the swords DO have a tang of sorts and can be fitted with a large wooden pommel.
View user's profile Send private message Send e-mail
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,641

PostPosted: Wed 05 Jun, 2013 6:24 pm    Post subject:         Reply with quote

You may want to read my book. It has a whole section on these swords and how they handle.
http://www.pen-and-sword.co.uk/Bronze-Age-Mil...nt/p/3272/
View user's profile Send private message
Matthew Amt




Location: Laurel, MD, USA
Joined: 17 Sep 2003

Posts: 1,462

PostPosted: Wed 05 Jun, 2013 7:00 pm    Post subject:         Reply with quote

A few of my bronze swords handle like steak knives, with no significant weight in the pommel. Even with the heavier ones, they are short enough that the balance is probably not a major issue.

Matthew
View user's profile Send private message Visit poster's website
Christopher B Lellis




Location: Houston, Texas
Joined: 01 Dec 2012

Posts: 268

PostPosted: Wed 05 Jun, 2013 8:44 pm    Post subject: Re: Bronze age sword recreations, anyone in America buy thes         Reply with quote

Chad Arnow wrote:
Christopher B Lellis wrote:
Never heard of this guy nor have I seen his work posted on this website.


Really? Happy A few minutes with the Search button yielded these. I'm sure there are more.

http://www.myArmoury.com/talk/viewtopic.php?t=27984
http://www.myArmoury.com/talk/viewtopic.php?t=26974
http://www.myArmoury.com/talk/viewtopic.php?t=22062
http://www.myArmoury.com/talk/viewtopic.php?t=21805
http://www.myArmoury.com/talk/viewtopic.php?t=21096
http://www.myArmoury.com/talk/viewtopic.php?t=17935
http://www.myArmoury.com/talk/viewtopic.php?t=16186
http://www.myArmoury.com/talk/viewtopic.php?t=8955


I wasn't looking for bronze age sword threads and don't remember ever seeing them. I've been so into medieval swords that I just didn't notice. Well, I feel kind of silly.

Thanks for those links Happy


Last edited by Christopher B Lellis on Wed 05 Jun, 2013 8:52 pm; edited 1 time in total
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Bronze age sword recreations, anyone in America buy these?
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum