Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > New Smallsword Reply to topic
This is a standard topic  
Author Message
Jesse Belsky
Industry Professional



Location: Durham, NC
Joined: 12 Aug 2007

Spotlight topics: 1
Posts: 173

Feedback score: None
PostPosted: Sat 05 May, 2012 8:31 am    Post subject: New Smallsword         Reply with quote

This is my first fully scratch-built smallsword. It also now holds my the land-speed record for shortest construction time start to finish (2 days), although since i didn't make the blade and its a lot less complex than a rapier that may not be a fair comparison. Big Grin

I made this hilt to fit a blade I bought, which is a diamond schlager made in eastern europe and sold by the fencing supplier Physical Chess. I originally bought it to mount on a rapier hilt but the blade was too slender and had too much taper to look right. It did look just right for a smallsword, so I built a hilt to accommodate its very beefy ricasso. Most schlagers are made from 1/4" stock at the most...this guy is 5/16 at the shoulders. I ground in the corners off the ricasso to make for a more comfortable grip. This isn't the way most smallswords are constructed (the hilt usually covers the tang between the hilt arms and the guard plate) but its pretty comfortable in the hand.

The grip is hardwood wrapped in gold and bronze colored wire. The shell guard is dished from .09 steel. This was my first attempt at dishing, and I was using a hollowed out pine board which caught fire while hammering at each and every heat. All in all i think it turned out well although I inhaled more pine smoke than I'd have liked.

I don't have a weight on it, but it balances about 1.5" in front of the guard. The blade is 33", and its 39" overall.

It doesn't have an owner yet. Drop me a line if you're interested.



 Attachment: 110.09 KB
IMG_5378EDIT.jpg


 Attachment: 113.96 KB
IMG_5372EDIT.jpg


 Attachment: 118.43 KB
IMG_5363EDIT.jpg


 Attachment: 76.88 KB
IMG_5359EDIT.jpg


 Attachment: 83.24 KB
IMG_5357EDIT.jpg


 Attachment: 116.83 KB
IMG_5351EDIT.jpg

View user's profile Send private message Visit poster's website
E Stafford




PostPosted: Sat 05 May, 2012 11:22 am    Post subject:         Reply with quote

A very nice sword, well done.
View user's profile Send private message
Jesse Belsky
Industry Professional



Location: Durham, NC
Joined: 12 Aug 2007

Spotlight topics: 1
Posts: 173

Feedback score: None
PostPosted: Tue 08 May, 2012 8:01 pm    Post subject:         Reply with quote

Thank you, Mr. Stafford. I'm glad you like it.

I had a couple nibbles from folks who were interested in buying this one, but its currently still available at $450 plus shipping. It's now on my website at www.jessebelsky.com/stageswords
View user's profile Send private message Visit poster's website
Tim Harris
Industry Professional



Location: Melbourne, Australia
Joined: 06 Sep 2006

Posts: 162

Feedback score: None
PostPosted: Tue 08 May, 2012 8:19 pm    Post subject:         Reply with quote

I've always found that bit between the shell the quillon a pain to make. That's a nice way around it - if there's enough ricasso to play with, of course.
View user's profile Send private message


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > New Smallsword
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2018 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum