Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


Please help our efforts with a donation. It's time to pay our annual server hosting bill. We've collected 2710.00 towards our goal of 2640 USD. View Goal Progress
Last 10 Donors: Neil Eddiford, Chad Arnow, Jean Thibodeau, Robert Morgan, Adam Rose, Jerry Otahal, Michael P. Smith, Mikko Kuusirati, Eric Bergeron, Daniel Staberg (View All Donors)

Forum Index > Off-topic Talk > Gas Forge question Reply to topic
This is a standard topic  
Author Message
John Schaefer





Joined: 14 Jun 2005

Posts: 20

PostPosted: Tue 03 Nov, 2009 11:05 am    Post subject: Gas Forge question         Reply with quote

I have recently modified my small gas forge and ran into a little problem. I cut a hole in the front to allow crucibles to be put in and wanted to attach a door that will swing open and close to trap the heat and also be able to close when I am forging blades. The door opening is 1.5x1 inch opening. The problem I have is I do not know how to attach the durablanket to the new door I made. Do I need glue or some type of tape to hold it there, I am kind of lost. Any help would be great.

Thanks

John
View user's profile Send private message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

PostPosted: Tue 03 Nov, 2009 11:22 am    Post subject:         Reply with quote

Hi John,

If I was doing it, I would make the door with a lip so that it holds the ceramic blanket in place, then coat the edges and face that will be exposed to the inside with so kind of ceramic coating. ITC 100 and Satinate are two of the most common used. Don't skip on the ceramic coating, your lungs won't like you if you do.

Another option would be to forget the door, and build a small shelf in front of the forge opening, and stack hard fire bricks to create the sized opening that you want or need for the application that you are using it for.

Hope this helps, also check out Don Fogg's forum which is geared more toward blade smithing for more information and ideas.
View user's profile Send private message Visit poster's website
Justin King
Industry Professional



Location: flagstaff,arizona
Joined: 12 Apr 2004
Reading list: 20 books

Posts: 551

PostPosted: Tue 03 Nov, 2009 11:53 am    Post subject:         Reply with quote

I drilled the doors on my forge and ran some screws through that are long enough to poke all the way through the wool, then criss-crossed bailing wire around and between the screws, tying the inswool down, then covered the whole thing in satanite.
View user's profile Send private message


Display posts from previous:   
Forum Index > Off-topic Talk > Gas Forge question
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2018 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum