Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > A pair of Baselards Reply to topic
This is a standard topic  
Author Message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Wed 09 Aug, 2017 4:40 pm    Post subject: A pair of Baselards         Reply with quote

Hi All,

I have just completed a pair of Baselards shown below.

Baselards were in two distinct styles. The German/Swiss style is often known as the 'Holbein' dagger style and is of the form that was favoured by the Nazis. The other style was very popular in Italy, but also in France and England and I guess but don't know, Flanders and Holland.

These two daggers are of the Italian/English style of Baselard. The shorter is styled after Italian pieces from the first part of the 14thC and has the slightly upturned upper guard that was quite common at the time.

The longer dagger is very closely based on an iconic piece from the Royal Armouries and is a little later in date and if I remember correctly may be French.

Both pieces have scales made from spalted box and soaked in linseed oil and held with copper rivets. The blades are 6mm/1/4" thick at the guard and the tangs taper down from there.

Both sheaths are made from two layers of veg tan leather, dyed black and finished with bronze chapes.

I hope you like them.

Tod

The smaller piece is a commission and the larger is available for sale.



 Attachment: 109.89 KB
www.todsstuff.co.uk Italian baselards 14thC 2.JPG


 Attachment: 176.12 KB
www.todsstuff.co.uk Italian baselards 14thC 3.JPG


 Attachment: 140.16 KB
www.todsstuff.co.uk Italian baselards 14thC 4.JPG


 Attachment: 122.88 KB
www.todsstuff.co.uk Italian baselards 14thC 5.JPG


www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Gregory T Kallok




Location: Northern Virginia
Joined: 10 Jul 2017

Posts: 35

Feedback score: None
PostPosted: Wed 09 Aug, 2017 5:01 pm    Post subject:         Reply with quote

Oh my, they are both beautiful. The owners are very lucky. Love that work!!!!
Keep your nose in the Wind and your eye on the skyline.
Del Q
View user's profile Send private message
Jean Thibodeau




PostPosted: Wed 09 Aug, 2017 9:27 pm    Post subject:         Reply with quote

I purchased one similar to the longer one from Tod a while back in 2014 and I'm very happy with it: The blade is fairly stout but not overbuilt.

http://myArmoury.com/talk/viewtopic.php?t=30399&highlight=

Mine has a lighter cream coloured handle and a narrow triangular flat near the guard instead of a short fuller: I do have to admit that I really like the short fuller on these a little bit better,

As always top quality work from Tod, and always a good customer service experience buying form him from his regular production and also a great experience with custom orders meeting all expectations about estimated delivery times, and good communication as one can read in the linked Topic above.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Jason O C





Joined: 20 Oct 2012

Posts: 114

Feedback score: None
PostPosted: Thu 10 Aug, 2017 7:29 am    Post subject:         Reply with quote

Nice work as always Tod.

Jason
View user's profile Send private message
Harry Marinakis




PostPosted: Mon 21 Aug, 2017 5:42 am    Post subject:         Reply with quote

I've been curious about the period manufacture of baselards - was the lower guard a separate piece, fitted like the cross of a sword, or was the whole knife forged as one piece?

If the latter, I'm curious how one would do that - chisel some wings and bend them out 90 degrees from the tang?
View user's profile Send private message
Paul Mullins





Joined: 22 May 2006

Posts: 120

Feedback score: None
PostPosted: Tue 22 Aug, 2017 3:33 am    Post subject:         Reply with quote

Harry Marinakis wrote:
I've been curious about the period manufacture of baselards - was the lower guard a separate piece, fitted like the cross of a sword, or was the whole knife forged as one piece?

If the latter, I'm curious how one would do that - chisel some wings and bend them out 90 degrees from the tang?


I would forge weld a piece 90° to the tang and then taper it but your suggestion would also work.
View user's profile Send private message AIM Address Yahoo Messenger
Jon Makar




Location: Winnipeg, Manitoba, Canada
Joined: 07 May 2012
Likes: 30 pages

Posts: 47

Feedback score: None
PostPosted: Tue 22 Aug, 2017 2:01 pm    Post subject:         Reply with quote

Being a huge fan of the Ljubljanica River sword (the sword that the Albion Ljubljana is based on), the double fuller on the Royal Armouries example is highly appealing to me! Great work yet again Sir Todeschini!
View user's profile Send private message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Thu 24 Aug, 2017 1:39 am    Post subject:         Reply with quote

Thanks guys. Very kind.

Harry Maranakis wrote.
Quote:
I've been curious about the period manufacture of baselards - was the lower guard a separate piece, fitted like the cross of a sword, or was the whole knife forged as one piece?

If the latter, I'm curious how one would do that - chisel some wings and bend them out 90 degrees from the tang?


I am not certain, but pretty sure that there were two ways of doing it. Some had a separate bottom guard and usually an separately fixed (welded or brazed) top guard made of a folded strip. Others were of one piece. Whether this one piece was welded pieces or cut from a larger piece I cannot say and I am sure they did both.

However, if you look at the Leeds example, so basically the profile of the longer one here, the arms of the guard, were they to be folded back would pretty much fill along the handle sides, so I would think the blank was formed to include the arms, they were then cut, folded out and had the thickness reduced a little, holes punched and voila.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > A pair of Baselards
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum