Author |
Message |
Peter Messent
|
Posted: Sat 14 Dec, 2013 9:01 pm Post subject: Update to a Viking axe and sword |
|
|
Howdy folks!
A while back I posted about the Danish Hand Axe from MRL ( http://www.myArmoury.com/talk/viewtopic.php?t...highlight= ) and the Deepeeka Triple Lobed Godfred ( http://www.myArmoury.com/talk/viewtopic.php?t...highlight= ). Both of these I thought were decent for the money, but neither were great. That being said, I'm a tinkerer by nature so this is far from cataclysmic
The DHA was never that attractive IMO - it did look better on their website pics though! I wound up chopping the beard to a flat, which helped some but I still wasn't big on it. The other day I decided that I would make it better, and this is what I came up with:
I chopped more off the beard, brought the heel back about 3/8" and then blended the curve from beard to eye a bit better. Reground the edge, sanded off the blue finish and then did a gun blue/bleach combo to rough up the surface. Hung it with part of a sledgehammer handle which happened to be the perfect size to fit 'tomahawk style'. Pinned with a nail, riveted over. All in all I'm pretty pleased with how it turned out. It weighs about 1lb 14oz now - the handle was really heavy, I get I got a particularly dense growing piece of hickory. I may wind up changing it out for ash down the road - I'm not sure if I like the length the way it is.
On to the Deepeeka! This sword has a bunch of issues really, but it doesn't look terrible IMO. It came with a diamond cross section which had to go. It also had the typical falsely-terminated fuller, rather than the fuller terminating because of distal taper, which meant the the sword was thickest at the tip. I wound up cutting a few inches off the blade - it's right around 26-27" now if memory serves me, and I ground the hell out of it to a spatulate tip. This one took a while, but was well worth it IMO - I was pretty taken aback by how much better it feels now. Weight s now 2lb 4oz and the point of balance has shifted towards the guard by 2" to about 4.5". While I was at it, I worked some on thinning the edges, bringing it closer to an appleseed. Still not quite there, though.
Since I had to shorten the scabbard , I had to remove the strap bridge and some leather. Turns out the scabbard is MDF. Kind of a bummer! Still, it works I guess. I'll probably make a new one, possibly uncovered wood with an integral strap bridge. We shall see!
Thanks for looking,
Pete
PS: sorry for the garbage pics - I made the effort to take good ones, they turned out bad and I said to hell with it! I have an axe coming in a couple days though, might take some beauty shots of them together!
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Jussi Ekholm
![](images/avatars/94545230454d54ca5551c6.jpg)
|
Posted: Sun 15 Dec, 2013 8:33 pm Post subject: |
|
|
I really like the updates you've made to Deepeeka viking sword. You've improved it so much.
Jussi Ekholm
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Peter Messent
|
Posted: Mon 16 Dec, 2013 1:23 pm Post subject: |
|
|
Thanks Jussi! I didn't spend as much time as I should've on the finishing, but I'm very pleased with the decision to chop a few inches off!
|
|
|
![](templates/myArmoury/images/spacer.gif) |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|