Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > Hungry Seax & Serpent Sword by Pikula, in-progress Reply to topic
This is a standard topic  
Author Message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 19 Jun, 2013 11:12 am    Post subject: Hungry Seax & Serpent Sword by Pikula, in-progress         Reply with quote

A happy Wednesday to everyone!

I wanted to take a few minutes to share two projects that are currently underway, and looking for a patron. The first is a pattern welded sword that is inspired by very early viking/migration era blades. There is no fuller, and the pattern is heavily influenced by the theme of the serpent. The core is composed of 9 rods, the central rod being a slowly creeping serpent of wrought iron, the patterning achieved by twisting the rod back at froth approximately 90 degrees, then forging flat, and is the same rod on each side. Next there are two bundles of 4 rods, on one side they form circles, or diamonds to symbolize the spots found on the back of snakes. On the opposite side the twisted sections are twisted in a similar proportion, but are offset to form the visual pattern of a snake moving across the ground, weaving back and forth.

I am really happy with the way that it turned out, but have yet to come up with a design for the hilt. If someone is interested in becoming the patron for this sword, I am very open to discussions as to what direction to take the hilting and scabbard making.



 Attachment: 208.65 KB
serpant1.jpg


 Attachment: 219.93 KB
Sepentdetail1.jpg


 Attachment: 232.42 KB
serpentdetail2.jpg

View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Wed 19 Jun, 2013 11:27 am    Post subject:         Reply with quote

The second piece is a pattern welded seax, which I have named "Hungry Seax"

The pattern has a series of triangles formed by twisted sections across 3 rods, each pointing toward the edge. A wrought iron serpent separates the body from the monosteel cutting edge. As with most historic specimens this blade developed quite a bit of a nose curve in quench, and when combined with the angle of the grip, it gives it a very hungry feel. The spine is decently thick on this one so it has a very significant amount of mass as well, adding to its over all presence.

I have a grip planned out for this blade, and have not yet formed a solid design for the scabbard, so if someone is interested in the piece please get in touch!

Thank you for taking the time to look at my work and I'll be posting updates as progress is made!

Michael



 Attachment: 128.13 KB
DSCN2662.JPG


 Attachment: 165.48 KB
DSCN2664.JPG


 Attachment: 118.53 KB
DSCN2663 copy.jpg


 Attachment: 109.86 KB
DSCN2665 copy.jpg


 Attachment: 117.08 KB
DSCN2666 copy.jpg

View user's profile Send private message Visit poster's website
Robert Muse




Location: Washington
Joined: 28 Sep 2009
Likes: 1 page

Posts: 494

Feedback score: 100%
(2 total ▮ 100% positive)
PostPosted: Wed 19 Jun, 2013 2:02 pm    Post subject: Sword         Reply with quote

Michael,
The sword blade is stunning! I would dearly love to have a migration period sword based on that. but it goes without saying that it is far out of my reach now. Some lucky owner will be very pleased to have this as the center of his collection.

Your blades are always a work of art.

That pattern welded, inlayed langsax I have from you is one piece that I will never sell.

Robert
View user's profile Send private message
Tim Lison




Location: Chicago, Illinois
Joined: 05 Aug 2004
Likes: 1 page
Reading list: 6 books

Spotlight topics: 1
Posts: 1,606

Feedback score: 100%
(11 total ▮ 100% positive)
PostPosted: Wed 19 Jun, 2013 10:27 pm    Post subject:         Reply with quote

Holy smoke! Those are excellent Michael! I really like the sword blade. A bit too early for me to consider but someone sure will be lucky to have this one! WOW is all I can say! Looking forward to seeing how you finish them off...
View user's profile Send private message
Robert Môc
Industry Professional



Location: Zvolen Slovakia
Joined: 15 Mar 2013

Posts: 74

Feedback score: None
PostPosted: Thu 20 Jun, 2013 1:00 am    Post subject:         Reply with quote

Perfect.This is really high level of craftmanship.Congratulations Michael.
View user's profile Send private message
Paul Mortimer




Location: England, Essex
Joined: 28 Aug 2003
Reading list: 1 book

Posts: 285

Feedback score: None
PostPosted: Thu 20 Jun, 2013 2:45 am    Post subject:         Reply with quote

Wonderful work. Both fantastic. I especially like the sword blade.

Paul
View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Mon 24 Jun, 2013 6:48 am    Post subject:         Reply with quote

Thank you so much for all the comments gents! I have more pattern welded pieces that are being made this week as well as two shorter knives made from high carbon crucible steel. Your comments and encouragement are warming as always. Happy

Michael
View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Thu 22 Aug, 2013 4:34 pm    Post subject:         Reply with quote

I have put the final finish on the Serpent Sword and it turned out absolutely beautiful! I couldn't be happier with it. Here are a few shots, and a link to my Facebook page that has more images of the patterning.

https://www.facebook.com/pages/Michaels-Smithy/271965196223148



 Attachment: 124.06 KB
DSCN3039.jpg


 Attachment: 244.58 KB
DSCN3046.jpg


 Attachment: 234.96 KB
DSCN3073.jpg


 Attachment: 217.28 KB
DSCN3061.JPG

View user's profile Send private message Visit poster's website
Patrick Kelly




Location: Wichita, Kansas
Joined: 17 Aug 2003
Reading list: 42 books

Spotlight topics: 2
Posts: 5,739

Feedback score: 100%
(6 total ▮ 100% positive)
PostPosted: Thu 22 Aug, 2013 5:40 pm    Post subject:         Reply with quote

Michael, that's an absolutely stunning pattern on that sword blade.
"In valor there is hope.".................. Tacitus
View user's profile Send private message AIM Address
Jean Thibodeau




PostPosted: Fri 23 Aug, 2013 5:12 am    Post subject:         Reply with quote

Patrick Kelly wrote:
Michael, that's an absolutely stunning pattern on that sword blade.


Yes that is seriously beautiful just looking at the pattern, the whole finished sword should be scary beautiful.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Mon 26 Aug, 2013 6:46 am    Post subject:         Reply with quote

Thank you very much for the feedback Patrick and Jean!

The sword and the seax are also still looking for a patron, so if anyone is interested please send me a message.

Thank you agian,
Michael
View user's profile Send private message Visit poster's website
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Mon 26 Aug, 2013 2:57 pm    Post subject:         Reply with quote

Being a pattern welder myself , I would expect to see a nice piece of pattern welding and think ...well there is a nice piece of pattern welding.
In the case of this sword I am afraid that I simply cant say that.

This is certainly not just a nice piece of pattern welding, its quite stunning.

A magnificent piece of work.


I await the finished sword with baited breath.

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Matthew Parkinson
Industry Professional



Location: wolcott CT
Joined: 31 Oct 2006

Posts: 23

Feedback score: None
PostPosted: Thu 29 Aug, 2013 4:44 am    Post subject:         Reply with quote

This is just stunning, really one of the Best Patterns I have ever seen. Way to raise the Bar Micheal!
Matthew Parkinson

it takes fire and steel to make a sword but only one of these to ruin one
FALLING HAMMER PRODUCTIONS LLC
Dragons Breath Forge
View user's profile Send private message Visit poster's website
Michael Pikula
Industry Professional



Location: Madison, WI
Joined: 07 Jun 2008

Posts: 411

Feedback score: None
PostPosted: Thu 05 Sep, 2013 2:32 pm    Post subject:         Reply with quote

Thank you very much for the positive feedback. It is always nice to hear one's efforts were worthy. Happy
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > Hungry Seax & Serpent Sword by Pikula, in-progress
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum