Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Bronze-age Stuff Reply to topic
This is a standard topic  
Author Message
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 1:53 pm    Post subject: Bronze-age Stuff         Reply with quote

Here are some of mine....
Swords, left to right: Kris Cutlery, Del Tin 215a, Neil Burridge Naue II (late), Manning Imperial Canaanite khopesh, Neil Burridge Egyptian Khopesh, Neil Burridge type G, Del Tin 210a.



 Attachment: 97.84 KB
2011-06-16 11-15-20_0004 A2.jpg


David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 1:54 pm    Post subject:         Reply with quote

Now, two axes: Manning Imperial Canaanite "duckbill", Windlass "Assyrian"


 Attachment: 94.82 KB
2011-06-17 09-40-08_0014 a1.jpg


David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 2:05 pm    Post subject:         Reply with quote

Some comments: The Kris Cutlery sword (long discontinued) is actually made of brass. Not bronze. At 2.5 lbs it's relatively heavy, but quite manageable. Of course, it's historical accuracy is minimal, at best -- not only the material, but also the length of the hilt and the fullering are questionable.
The Del Tin swords are crowbars. They both weigh over 3.5 lbs. I had Art Elwell install the stag grips on the 215a. It was my first bronze sword; what did I know at the time? The 210a is heavier, but better balanced. Still a crowbar.
The Manning Khopesh is overweight at 2.75 lbs. I think it handles well despite the weight. It's definitely a chopper.
The Neil Burridge swords are, of course, awesome. Comparing the Burridge Naue II and the DT 215a is like night and day. All my other bronze swords bow down to the awesomeness that is the Burridge bronze.

The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better.

David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
Timo Nieminen




Location: Brisbane, Australia
Joined: 08 May 2009
Likes: 1 page
Reading list: 1 book

Posts: 1,504

PostPosted: Tue 25 Sep, 2012 2:29 pm    Post subject:         Reply with quote

David Wilson wrote:
The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better.


Do we have art showing how duckbills were mounted?

What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes.

"In addition to being efficient, all pole arms were quite nice to look at." - Cherney Berg, A hideous history of weapons, Collier 1963.
View user's profile Send private message Visit poster's website
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,641

PostPosted: Tue 25 Sep, 2012 2:47 pm    Post subject:         Reply with quote

That's a beautiful collection David. Thanks for sharing. IMO all sword collectors should have at least one Burridge sword. It gives some perspective and helps to dispel myths about swords.
View user's profile Send private message
Gregory J. Liebau




Location: Dinuba, CA
Joined: 27 Nov 2004

Posts: 669

PostPosted: Tue 25 Sep, 2012 3:03 pm    Post subject:         Reply with quote

An excellent array of weaponry, David. After selling my three incomplete Burridge blades some time ago, I am seriously regretting the move... It's been hard to come up with finances to purchase more to actually finish!

Are you a member over at the Bronze Age Center? I can't recall... Re-posting your collection there would be a very fine thing, indeed, as many members would appreciate being able to see these photos and even more details regarding your hilt constructions, etc.

Cheers!

-Gregory
View user's profile Send private message
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 5:07 pm    Post subject:         Reply with quote

Timo Nieminen wrote:
David Wilson wrote:
The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better.


Do we have art showing how duckbills were mounted?

What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes.


I'm not sure, anyway I haven't seen any... I was considering the leather cord/wrap technique similar to what you're describing at some point, though....

David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 5:11 pm    Post subject:         Reply with quote

Gregory J. Liebau wrote:
An excellent array of weaponry, David. After selling my three incomplete Burridge blades some time ago, I am seriously regretting the move... It's been hard to come up with finances to purchase more to actually finish!

Are you a member over at the Bronze Age Center? I can't recall... Re-posting your collection there would be a very fine thing, indeed, as many members would appreciate being able to see these photos and even more details regarding your hilt constructions, etc.

Cheers!

-Gregory


I actually am a member over at BAC... was going to post there too but ran out of time....

(My hilt construction technique is simple -- I usually let more talented folks do it for me.....) Big Grin

David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
Matthew Amt




Location: Laurel, MD, USA
Joined: 17 Sep 2003

Posts: 1,462

PostPosted: Tue 25 Sep, 2012 8:54 pm    Post subject:         Reply with quote

Timo Nieminen wrote:
Do we have art showing how duckbills were mounted?

What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes.


There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours!

WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!)

Nice collection, thanks for sharing the photos!

Matthew
View user's profile Send private message Visit poster's website
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 25 Sep, 2012 11:40 pm    Post subject:         Reply with quote

Matthew Amt wrote:

There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours!

WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!)

Nice collection, thanks for sharing the photos!

Matthew


Thanks!
Actually, the axe head itself isn't bad at all! The haft is weird, though. It's rather wide, and just feels odd in the hand.

David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
Paul Hansen




Location: The Netherlands
Joined: 17 Mar 2005
Likes: 5 pages

Posts: 845

PostPosted: Tue 02 Oct, 2012 11:49 am    Post subject:         Reply with quote

Nice collection David!

It reminds me that I need a khopesh. Or to finish one of my many unfinished bronze swords... Confused
View user's profile Send private message
Robert Muse




Location: Washington
Joined: 28 Sep 2009
Likes: 1 page

Posts: 494

PostPosted: Tue 02 Oct, 2012 2:48 pm    Post subject: Bronze Age         Reply with quote

Very nice collection. Somewhat before my era for collecting, but I agree that everyone should have a sword by Neil, who is a real gentleman to deal with.

Here is mine.

Robert



 Attachment: 100.69 KB
P1030753.JPG

View user's profile Send private message
David Wilson




Location: In a van down by the river
Joined: 23 Aug 2003

Posts: 803

PostPosted: Tue 02 Oct, 2012 5:50 pm    Post subject:         Reply with quote

Nice scabbard! Who made it?
David K. Wilson, Jr.
Laird of Glencoe

Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
View user's profile Send private message AIM Address
Robert Muse




Location: Washington
Joined: 28 Sep 2009
Likes: 1 page

Posts: 494

PostPosted: Tue 02 Oct, 2012 6:36 pm    Post subject: Scabbaard         Reply with quote

Hi,
Sonny Suttles made it. He has made some great scabbards for me. Of late he has been impossible to contact and must be very behind. I have some work in limbo with him. I hope he is very busy and isn't ill.

Robert
View user's profile Send private message
Jean Thibodeau




Location: Montreal,Quebec,Canada
Joined: 15 Mar 2004
Likes: 50 pages
Reading list: 1 book

Spotlight topics: 5
Posts: 8,310

PostPosted: Tue 02 Oct, 2012 6:51 pm    Post subject:         Reply with quote

Matthew Amt wrote:
Timo Nieminen wrote:
Do we have art showing how duckbills were mounted?

What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes.


There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours!

WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!)

Nice collection, thanks for sharing the photos!

Matthew


I have a reference book with that type of axe identified as from Luristan in origin but I guess Assyrian is regionally close by or overlaps with the Assyrian Empire at some time period ?

In any case it looks very very close to the pics in my reference books.

Oh, and nice collection David. Big Grin Cool

I have another version of Bronze sword by Del-tin ( Leaf shaped blade ) purchased from Albion around 2001 and it is overweight also, the tip/central rib was sort of crude and stubby but I used files to at least re-profile it to better geometry and sort of sharpen the edges. I assume that the edges of the Del Tins are not hammer work hardened and too soft to take a good edge: So I didn't try to do much more than create a decent secondary bevel.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,641

PostPosted: Wed 03 Oct, 2012 1:08 am    Post subject:         Reply with quote

Jean Thibodeau wrote:
I have a reference book with that type of axe identified as from Luristan in origin but I guess Assyrian is regionally close by or overlaps with the Assyrian Empire at some time period ?.

These days "Luristan" has become shorthand for "illegally looted from somewhere in the Middle East".


Last edited by Dan Howard on Wed 03 Oct, 2012 1:10 am; edited 1 time in total
View user's profile Send private message
Mackenzie Cosens




Location: Vancouver Canada
Joined: 08 Aug 2007

Posts: 238

PostPosted: Wed 03 Oct, 2012 1:09 am    Post subject:         Reply with quote

lovely.

http://www.bronze-age-swords.com/index.htm

The menu at the side will roll out when you mouse over it.
View user's profile Send private message
Jean Thibodeau




Location: Montreal,Quebec,Canada
Joined: 15 Mar 2004
Likes: 50 pages
Reading list: 1 book

Spotlight topics: 5
Posts: 8,310

PostPosted: Wed 03 Oct, 2012 8:30 pm    Post subject:         Reply with quote

Dan Howard wrote:
Jean Thibodeau wrote:
I have a reference book with that type of axe identified as from Luristan in origin but I guess Assyrian is regionally close by or overlaps with the Assyrian Empire at some time period ?.

These days "Luristan" has become shorthand for "illegally looted from somewhere in the Middle East".



Interesting and " unfortunate ": Don't know if it qualifies as " these days " since it's in a book I bought around 1969 published in France.

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,641

PostPosted: Thu 04 Oct, 2012 6:22 am    Post subject:         Reply with quote

Back then it might actually have been found in Luristan.
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Bronze-age Stuff
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum