Go to page 1, 2  Next

Border Reiver's Swords ??
What swords did the Reiver's carry ??? (1500s - 1600s ) ( please discount the rapier style )

I have been asked by a friend to "advise" But ....

Jack
I would think that we're talking about better quality swords meant for use on horseback.
German single-hand baskethilt swords, with continental blades of varying type, from Oakeshott XIX to long backsword blades to long, narrow, double-edge blades, sometimes with fuller.
Relatively open native Anglo/Scots single-hand basket hilts (Mary Rose type) mounted on the same continental blades.
German complex-hilt hand-and-a-half swords.
All good candidates, I think:


 Attachment: 26.83 KB
download-8.jpg


 Attachment: 34.34 KB
download-9.jpg


 Attachment: 155.11 KB
eMuseumPlus-3.jpg


 Attachment: 130 KB
eMuseumPlus.jpg


 Attachment: 74.01 KB
download-10.jpg


 Attachment: 55.11 KB
[ Download ]
Hm, maybe even early ribbon hilts with quillons? First one we know of is from portrait of Edward Lyttleton of Longford, 1568...
I think you would have seen this type on the border around 1615.


 Attachment: 95.46 KB
English hilt2.jpg
From Neumann's Swords & Blades of the American Revolution, page 143
Germanic examples like the sword shown below and the modern sword it it inspired in my own collection might be a good choice, too.

This sword is located in the Museum of Border Arms and Armour, Scotland.

[ Linked Image ]
Nathan Robinson wrote:

This sword is located in the Museum of Border Arms and Armour, Scotland.


Too bad the Moffats had to close that up. It was an interesting little place.
Sean, do you have any more info ont this sword from the Wallace Collection?

http://www.myArmoury.com/talk/download.php?id=34194
Eric Hejdström wrote:
Sean, do you have any more info ont this sword from the Wallace Collection?

http://www.myArmoury.com/talk/download.php?id=34194


It's on the Wallace Collection web site.

The Wallace Collection wrote:
Sword
Unknown Artist / Maker
c. 1560 - c. 1580
Iron or steel, fish-skin and steel, chiselled
Length: 92.6 cm, blade
Width: 3.5 cm
Width: 1.105 cm
Maker's mark
A519
European Armoury II
Eric Hejdström wrote:
Sean, do you have any more info on this sword from the Wallace Collection?

http://www.myArmoury.com/talk/download.php?id=34194


It's a personal favorite!

# Sword
# Unknown Artist / Maker
#
# c. 1560 - c. 1580
# Iron or steel, fish-skin and steel, chiselled
# Length: 92.6 cm, blade
Width: 3.5 cm
Width: 1.105 cm
# Maker's mark
# A519
# European Armoury II

Direct link: http://wallacelive.wallacecollection.org/eMus...detailView

Wallace Collection Search Page: http://wallacelive.wallacecollection.org/eMus...=highlight

NOTE: You won't get every sword when you search for "sword". Try both "sword" and "longsword" in separate searches. It's probably a good idea to use a similar system when searching for other items ("helmet" and "sallet", for example).
Thanks guys, it's a superb sword! I'd want one for my wife I think, she would look great with that one...
Thanks Guys. Now the "biggy.??

This individual is just starting to become involved in "portraying a "Reiver" with a small group. He just asked

" Jack, Those examples are great. But my $$$ are some what limited & having a "custom, historical accurate sword is, for now out of my $$ range. My group will accept Swords that although perhaps of a slightly later date ( 1620s ) that still "reflect the Reiver period.
You gave me some ideas of some that may work.
a. Higher end "production makers" - Armor Class etc. Etc.
b. Good "mid range" makers such as Windlass,Hanwei etc.
What swords would you recommend in these $$ brackets ??

Thank You My friend "

Can you guys assist ????

Jack
It sounds like $$ might be an issue (as it is for most of us :\ ) so I would think that the Armour Class early baskethilt would probably be the solution for your friend. Scott at Darkwood armory might be able to make one for the about the same price too. that would be my advice. I have had both AC and Darkwood do work for me in the past and can highly recommend them both! tr
Thom R. nailed it as far as recommendations.
Thom R. wrote:
It sounds like $$ might be an issue (as it is for most of us :\ ) so I would think that the Armour Class early baskethilt would probably be the solution for your friend. Scott at Darkwood armory might be able to make one for the about the same price too. that would be my advice. I have had both AC and Darkwood do work for me in the past and can highly recommend them both! tr


Thorn, In addition would "ACs" 17th cent. Tower Hanger ( proto Morturary ) work ???

Jack
Jack W. Englund wrote:
Thorn, In addition would "ACs" 17th cent. Tower Hanger ( proto Morturary ) work ???


I know your'e asking Thom, but my two cents are that I don't personally like it for that purpose. It does not seem well placed as a border weapon in my eyes. It's too late, to boot, for most people's "border needs".
Windlass Munich sword.
I'm not necessarily recommending this sword - just throwing it into the mix.

The Windlass German Pilsen Rapier

Also, take a look at these Del Tin 16th Century swords --they may cost more than your friend wants to pay.
Hmm, well there ceased to be a border after 1603...... one of James I main accomplishments seems to have been pacification of the border marches by about 1610. Therefore I would still vote for an early baskethilt or a late 15th c rapier and shy away from the Tower type hanger or a Munich Town Guard type of sword as both are really 17th c swords more appropriate for ECW, Covenanter War or Irish Confederate War. anyway I understand that there might not be a Windlass sword option for late 16th c right now although I have been thinking what discontinued Windlass model might fit. I just can't bring one to mind right now. There are some Del Tins that would work but they are about the same price as the swords I already rec'd

One thing that could work would be a rather simply hlted sword with one or two side ring(s). Or have your friend get a good dagger for the time being and save up the money for a sword.

The other problem of course with a late 15th c persona is the firearms. Its the period of the wheelock pistol not the flintlock pistol and getting a reproduction wheellock pistol is tricky too. Maybe Gordon will step in and add his advice.

http://www.theborderers.info

http://forums.armourarchive.org/phpBB3/viewto...mp;t=44846
Thom R. wrote:


The other problem of course with a late 15th c persona is the firearms. Its the period of the wheelock pistol not the flintlock pistol and getting a reproduction wheellock pistol is tricky too. Maybe Gordon will step in and add his advice.



As happens this an area that I have some knowledge of ( via those who make them. ) But the blades = ????

Jack
Go to page 1, 2  Next

Page 1 of 2

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum