Author |
Message |
G. Ghazarian
Industry Professional
![](images/avatars/11759283549d196b3580e8.jpg)
|
Posted: Wed 17 Nov, 2010 5:20 pm Post subject: Creation inspired by 15-16th Century Swords |
|
|
Here is one of my latest creations inspired by various great swords of the late 15-th and early 16-th centuries.
Overall length :------------------- 52 1/8 inches
Blade length :--------------------- 37 1/2
Handle length :------------------- 11
Blade width at cross :----------- 2.160
Blade thickness at cross :----- 0.260
Center of gravity :---------------- 2 1/2 from cross
Center of percussion :---------- about 24" from cross
Weight :----------------------------- 4lb 15.5 oz
The handle is Amboyna burl with Ebony side pieces and Nickel Silver bands.
Your questions and comments are welcome.
Enjoy.
Gabriel
Attachment: 41.61 KB
![15-16.jpg](files/15-16_109.jpg)
Attachment: 57.78 KB
![IMG_3449.JPG](files/img_3449_361.jpg)
Attachment: 59.86 KB
![IMG_3451.JPG](files/img_3451_161.jpg)
Attachment: 68.31 KB
![IMG_3457.JPG](files/img_3457_670.jpg)
G. Ghazarian
http://gloryships.com/
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Roger Hooper
![](images/avatars/13223414565c25c22f6b376.jpg)
|
Posted: Wed 17 Nov, 2010 5:56 pm Post subject: |
|
|
It's a beautiful sword. I like the variations on the type T pommel and type 11 guard. At 1/2 oz. under 5 lbs. it seems kind of heavy, even for a big sword. How does it handle?
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Sander Marechal
![](images/avatars/3416438784b3fce99ea000.jpg)
|
Posted: Wed 17 Nov, 2010 9:38 pm Post subject: |
|
|
Whoa. It's so crips and clean, it almost looks like CGI rendering. Especially that first picture.
The Knights Hospitaller: http://www.hospitaalridders.nl
|
|
|
![](templates/myArmoury/images/spacer.gif) |
G. Ghazarian
Industry Professional
![](images/avatars/11759283549d196b3580e8.jpg)
|
Posted: Thu 18 Nov, 2010 4:49 pm Post subject: |
|
|
Thank you gentlemen for your comments. I appreciate it.
Despite the weight, this sword with a rigid blade has an excellent point control and handles beautifully.
The blade tapers distally from 0.260" at the cross to 0.150" at 3 inches from the tip. I believe this is adequate for a Cut and Thrust type sword. Of course It could be ground further and made lighter, but at the cost of compromising rigidity and turning it into a whip, something that I would not let happen.
G. Ghazarian
http://gloryships.com/
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Jean Thibodeau
![](images/avatars/1042827364ba7034bbacbe.jpg)
|
Posted: Thu 18 Nov, 2010 5:10 pm Post subject: |
|
|
G. Ghazarian wrote: | Thank you gentlemen for your comments. I appreciate it.
Despite the weight, this sword with a rigid blade has an excellent point control and handles beautifully.
The blade tapers distally from 0.260" at the cross to 0.150" at 3 inches from the tip. I believe this is adequate for a Cut and Thrust type sword. Of course It could be ground further and made lighter, but at the cost of compromising rigidity and turning it into a whip, something that I would not let happen. |
Very interesting about the distal taper: Although some if not most of medieval sword ( Well depending on type this will be more or less thin ) seem to distal taper to what seems to me alarmingly thin blades I sort of like when they maintain some thickness near the point.
Naturally one must still distal taper them enough to achieve a desire handling quality I sort of like when it isn't overdone.
Oh, very nice sword and your swords do have a very specific aesthetics where they are almost too perfect if one wanted them to match the historical swords that had " flaws ", but as modern reinterpretations and as art they are awesome and very beautiful.
You can easily give up your freedom. You have to fight hard to get it back!
|
|
|
![](templates/myArmoury/images/spacer.gif) |
Tim Lison
|
Posted: Thu 18 Nov, 2010 8:24 pm Post subject: |
|
|
As always, you have turned out a beautiful sword. The grip is simply marvelous!
I know it isn't your favored era but I would love to see what you could do with a migration era sword with sandwiched hilt components or even a ring hilt. Sorry for the flight of fancy but I think you could really do one justice.
Anyway, this sword is brilliant!
|
|
|
![](templates/myArmoury/images/spacer.gif) |
G. Ghazarian
Industry Professional
![](images/avatars/11759283549d196b3580e8.jpg)
|
Posted: Sun 21 Nov, 2010 3:45 pm Post subject: |
|
|
I do appreciate your good words for the quality of my work. I thank you both et merci bien Jean.
Tim, your suggestion is duly noted. Single handed in general, migration and specially viking swords are getting to be more and more interesting. I may try my hand at these as enough information becomes available.
G. Ghazarian
http://gloryships.com/
|
|
|
![](templates/myArmoury/images/spacer.gif) |
|