New heat treated blades in progress
Hi Here are blades in progress ready to start mounting. With the katana blades, the one with deep sori is 1075 and the other is 1095 fine grain. They were made straight and curved during clay/water quench, then tempered.


 Attachment: 68.41 KB
DSCF0006 (Medium).JPG


 Attachment: 57.09 KB
DSCF0010 (Medium).JPG

Re: New heat treated blades in progress
John Lundemo wrote:
Hi Here are blades in progress ready to start mounting. With the katana blades, the one with deep sori is 1075 and the other is 1095 fine grain. They were made straight and curved during clay/water quench, then tempered.


They all look intriguing. I suspect many are fantasizing about the hilted results. I am curious if the Western European ones that appear; "leaf blade", and the migration era / possibly Roman spatha forms are of 1075 or 1095? And if so, do you oil quench? I have not tried a water quench on a knife yet.
Hmmmm........Is the third one from the top a type X?
Inquiring minds want to know!
Some intriguing looking blades there! Can you provide an approximate sense of scale for these swords? It's hard to tell without any size references, although I have some ideas based on one blade in particular. :D
Re: New heat treated blades in progress
Jared Smith wrote:
John Lundemo wrote:
Hi Here are blades in progress ready to start mounting. With the katana blades, the one with deep sori is 1075 and the other is 1095 fine grain. They were made straight and curved during clay/water quench, then tempered.


They all look intriguing. I suspect many are fantasizing about the hilted results. I am curious if the Western European ones that appear; "leaf blade", and the migration era / possibly Roman spatha forms are of 1075 or 1095? And if so, do you oil quench? I have not tried a water quench on a knife yet.
Everything is 5160H except the two shobu katana. The deep sori one is 1075 and the shallower one is 1095FG
Ken Speed wrote:
Hmmmm........Is the third one from the top a type X?
Inquiring minds want to know!
Yeah it is, good eye;)
Chris Lampe wrote:
Some intriguing looking blades there! Can you provide an approximate sense of scale for these swords? It's hard to tell without any size references, although I have some ideas based on one blade in particular. :D
The gid dark one in center is 46" total The spatha with no fuller is 38" total
good morro
:cool: If the gods are smiling upon me this day. the third one from the top would be type X :cool:
Hi John, Lindley here.
The wu-jian is spectacular and true to form. You were right about the hamon edges; it was how it was done back then and one could carve stove bolts with them. I wanted to see what it would do and I selected a small palm tree that had sprouted in my back yard. I cut all the fronds at their bases with one go. My neighbors think I'm insane. I did it at 4 in the morning. There is not a mark on the blade. The geometry of the blade is also a factor in making it cut so well. If I can figure out how to do it, I'll post some pics of it on this website. People should see this. I now call it.................."Burglar Cutter"
Thanks again. D.L.

By the way, I saw a town in Sweden called Lundemo when I was there; passed it on the road at high speed. Now I see the Viking connection.
Re: Hi John, Lindley here.
D. Lindley wrote:
The wu-jian is spectacular and true to form. You were right about the hamon edges; it was how it was done back then and one could carve stove bolts with them. I wanted to see what it would do and I selected a small palm tree that had sprouted in my back yard. I cut all the fronds at their bases with one go. My neighbors think I'm insane. I did it at 4 in the morning. There is not a mark on the blade. The geometry of the blade is also a factor in making it cut so well. If I can figure out how to do it, I'll post some pics of it on this website. People should see this. I now call it.................."Burglar Cutter"
Thanks again. D.L.

By the way, I saw a town in Sweden called Lundemo when I was there; passed it on the road at high speed. Now I see the Viking connection.


Is this a new jian from John or one we've seen before? If you want to e-mail me the photos I'll post them up here for all to see.

clampe1518hp@cox.net
Re: Hi John, Lindley here.
Chris Lampe wrote:
D. Lindley wrote:
The wu-jian is spectacular and true to form. You were right about the hamon edges; it was how it was done back then and one could carve stove bolts with them. I wanted to see what it would do and I selected a small palm tree that had sprouted in my back yard. I cut all the fronds at their bases with one go. My neighbors think I'm insane. I did it at 4 in the morning. There is not a mark on the blade. The geometry of the blade is also a factor in making it cut so well. If I can figure out how to do it, I'll post some pics of it on this website. People should see this. I now call it.................."Burglar Cutter"
Thanks again. D.L.

By the way, I saw a town in Sweden called Lundemo when I was there; passed it on the road at high speed. Now I see the Viking connection.


Is this a new jian from John or one we've seen before? If you want to e-mail me the photos I'll post them up here for all to see.



This is a new jian that John made for me that does not appear on the website. It has a died green maple burl handle that looks like jade. I asked him to make me one and gave him freedom to make variations wherever he thought appropriate. It turned out to be a real functional work of art. I've noticed that in his work there is most always the Viking in there. Since the origin of the jian in China is from the northwest and the guards on the early Han Jians were nearly an exact Thor's Hammer it made it even more appropriate that he make a jian. Boy was I ever right on this one. I'm on the road right now but I'll be back in two weeks and I'll take some pics. Thanks. D.L.
Ken Speed wrote:
Hmmmm........Is the third one from the top a type X?
Inquiring minds want to know!



Tim Seaton wrote:
:cool: If the gods are smiling upon me this day. the third one from the top would be type X :cool:



Back off boys, that one is mine. :cool:

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum