Where to buy mail gauntlets?
Hi all! I'm working on a kit for a Scot (lowlander) from about 1320. I've already got my haubergeon and am in need of a pair of mail gauntlets. I know about the ones from MRL, which are 18 gauge steel. I am really hoping to find some that are heavy enough to be used for sparring/armored combat (SCA, ECS, Adrian Empire, and similar). Does anyone know where to obtain a good pair for this purpose?

In addition, I'm not necessarily set on mail. The persona is a mercenary, so if there are other forms of gauntlets appropriate for that persona, I'm willing to take suggestions. I've already used the search function and wasn't able to find much information.

Thanks in advance,
Alan
1320's? If I were you I'd be looking at early wisby-style gauntlets. I think they're safer too for SCA-type work. Mail isn't that good at absorbing blunt force on it's own without significant padding underneath. That's usually not a problem for a hauberk with a gambeson underneath but I wouldn't trust my fingers to a thinner padding on mail gauntlets.
For mail gauntlets, which would be mufflers, they are very easy to make yourself. Just get yourself a patch of very small ringed mail. Sew a muffler first, here you can hide additional protection, be it dense foam, plastic, steel or just padding, cover it with coth and them add the maille cut to shape. Only your thub would have to be an extra piece. So you see, very easy and not too costly.
Thanks guys. I was originally looking at getting steel gauntlets, but was hoping that I could find a mail alternative for cheaper. I was able to find some information that David Teague wrote about making his own mail gloves by attaching fine mail to a padded sparring glove. Even with the padding, he said his hands were still more vulnerable than if he wore steel gauntlets. That being the case, I'll go back to my original plan with steel.

Thanks again for the replies,
Alan
Edit: wrong link

How about these? I've never bought any Windlass armor so I can't testify to its quality or anything. Something like what you're looking for?

http://www.museumreplicas.com/p-68-mail-gauntlets.aspx
Hey Myles, those are the ones I mentioned from MRL. They are 18 gauge, both cuff and rings, and although the mesh is fine enough to protect against cuts, they are not padded at all, and others who have owned them have said they are practically useless for combat use, as strikes to the hands will still lead to injury due to blunt trauma. I was looking for something similar, though.

Thanks,
Alan
I think the best option is doing them yourself, like Felix suggested. You can pad them as much as you want, with the right steel that suit yourself and your combat style, and even special addition (steel, kevlar, etc.). I have see even mail gauntlets started with gloves for motorcycles.
In my company someone prefer very light undergloves, to maximize flexibility, but I prefer heavly underpadder ones.
If you need help to start mailing you have only to ask...
Thanks everyone for your input. After thinking about it more, I think I might be better off with Wisby-style gauntlets. Personally I generally prefer mail to plate, but I really want to make sure I don't mess up my hands, and would feel safer with rigid steel protection.

That being said, does anyone know where to get budget Wisby gauntlets? The only ones I've seen were prohibitively expensive. Unfortunately as a poor college student, I don't have a large budget ($200 at most) for gauntlets. So if anyone knows of a pair for that price or under, I'd appreciate it.

Alternatively, I can add the cuffs myself, and really only need the hand of the gauntlet. If anyone can point me to a different pair of gauntlets that I could modify into a Wisby style, that would work too. I was thinking about trying to work with the GDFB Churburg gauntlets, since the fingers are very similar to the Merc's Tailor Wisby gauntlets. Do you think those would work?

Thanks for all your help,
Alan
Yo can have a look at the bestarmour webpage. But the thing with Visby gauntlets is, that those involve a lot of fiddling with small pieces and a lot of riveting. This is what makes them expensive.
Alan Schiff wrote:
Thanks guys. I was originally looking at getting steel gauntlets, but was hoping that I could find a mail alternative for cheaper. I was able to find some information that David Teague wrote about making his own mail gloves by attaching fine mail to a padded sparring glove. Even with the padding, he said his hands were still more vulnerable than if he wore steel gauntlets. That being the case, I'll go back to my original plan with steel.


David Teague? Hey, that's me! ;)

Fingers... look half way down the page

Visby gauntlet kits thread I'd make my own wrist plates and only buy the fingers & backs of hands

Cheers,

The Real David Teague...

P.S. Stay away from the GDFB Churburg gauntlets... I rebuilt a pair and they were a lot of work and still aren't all that good.

Thanks Felix. Unfortunately, the gauntlets at bestarmour are more than my budget.

David, thanks for the links. Do you know if the rfth fingers come with the entire back of the hand? It says they come with knuckles, but I wasn't sure what that means exactly.

Thanks again,
Alan
I took another look around for gauntlets that I might be able to modify and found a couple that are in my price range. Has anyone heard of or ordered from wither of these sites?

http://medieval-chain-mail-armor.com/armor-gauntlets.htm

http://wholesalearmor.com/SCALEDGAUNTLETS.html

Thanks,
Alan
David Teague wrote:
P.S. Stay away from the GDFB Churburg gauntlets... I rebuilt a pair and they were a lot of work and still aren't all that good.

Thanks for that bit of information David. You just described what I was planning on doing this spring! Could you provide a "mini-review" of the GDFB Churburg gauntlets for the forum?
Alan Schiff wrote:
I took another look around for gauntlets that I might be able to modify and found a couple that are in my price range. Has anyone heard of or ordered from wither of these sites?

http://medieval-chain-mail-armor.com/armor-gauntlets.htm

http://wholesalearmor.com/SCALEDGAUNTLETS.html

Thanks,
Alan


From the looks of it and the term "gernerous" in the shape I would advise to stay away from those. Better safe more money and buy the real thing, or just do some maille mufflers with hidden plates.
Thanks Felix, that was my thought too, but I was hoping someone had experience with them.

At this point, I may end up just trying my hand at making a Wisby style gauntlet using steel over leather like the Best Armour design.

Thanks again,
Alan
Well I've been working on one for use in my HEMA group (Stoccata) for when I eventualy get onto some I.33.
Basicaly, I'm not sure what the SCA-ish regulations are where you are, but as far as I've been told, the muffler I've made is legal... Mostly.
It's just butted wire (same old, same old), but done in a "Double Maille" sort of way. So instead of 4'n1 it's 8'n2 if that makes any sense.
I've got some "Making Of..." type videos up on here: http://www.youtube.com/user/SamGCampbell


 Attachment: 76.64 KB
Picture 1.jpg
Just thought I'd post this real quick.

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum