Type XVa
Hello everyone.

Just finished this Type XVa sword, one of my favorite types - classic, simple and very elegant.

Specs as follows:


Total length ---------- 55 1/2 inches
Blade length --------- 41 1/2
COG -------------------- 3 3/4
Blade steel ------------ 5160
Weight ------------------ 4 lb 6 oz

As sharp as a reinforced needle and a knife and with a blade width of 2" and a thickness of 0.320" at the forte, she is as stiff and rigid as a toothpick.

Enjoy and thanks for looking.

Gabriel


 Attachment: 27.8 KB
IMG_2621.JPG


 Attachment: 57.22 KB
IMG_2628.JPG


 Attachment: 70.59 KB
IMG_2631.JPG


 Attachment: 66.73 KB
IMG_2636.JPG


 Attachment: 72.74 KB
IMG_2634.JPG



Last edited by G. Ghazarian on Sat 23 May, 2009 2:19 pm; edited 1 time in total
Is that a cross inset into the pommel? That's really neat.
The inset is a reticulated (samorodok) medalion that I have made, with an outline or a hint of a cross. It is a difficult technique but most importantly, it is a challenge.

Nathan, I appreciate your attention to detail, Thank you.
G,

Very nice!

One question though: Do you make your own blades or do you just do customizations to swords? If so, what is your sword of preference to work on?
That is a very nice sword -- perhaps the longest XVa that I've seen.

I really like the pommel inset. It takes a second for the cross pattee to emerge. Do you have a close-up photo of it?
JE Sarge wrote:
G,

Very nice!

One question though: Do you make your own blades or do you just do customizations to swords? If so, what is your sword of preference to work on?


Thanks for your compliment Jonathan.

Customization, yes I have done that, but that was some time ago. It was a way of learning and practicing. I even do that now occasionally, but I always announce it, and give credit where credit is due.

Otherwise, it is my work, 100%. I am a believer in doing it yourself if you want it done right, or don't do it, buy it from somebody who can.

I only send out for heat treating to people who specialize in it, something I don't want to fool around with.

I like working on all types, but I must admit, I am biased when it comes to the Type XX or XXa. I love them. They are a real challenge to grind, and I am crazy for challenge. The area of transition from the fullers on the ricasso to the facets of the blade is what makes or breaks the beauty of the blade.

Gabriel
Roger Hooper wrote:
That is a very nice sword -- perhaps the longest XVa that I've seen.

I really like the pommel inset. It takes a second for the cross pattee to emerge. Do you have a close-up photo of it?


Roger, I'll take close up pictures of both sides for you in the daylight tomorrow, I hope you don't mind.

Thanks for your good words.
Wow, I really like this one. I think this is my favorite among the other ones you made. Practical yet elegant. Very good job on the pommel!

I also like the shape of the grip....
Thanks Hugo, I'm glad you like this one.
Close up of the insets with a diameter of 1 1/8 inches.


 Attachment: 144.28 KB
IMG_2638.JPG


 Attachment: 135.13 KB
IMG_2640.JPG

That medallion is really beautiful. It has the virtue of being a modern design that honors the past.
Am I reading those dimensions correctly? 55.5"?

WOW, that thing must be a monster in person!

In terms of proportions, I think you got this one spot-on, Gabriel. It all comes together to work beautifully!
That inset is simply stunning in close detail. It has an amazing antiquated look to it.

I'd really like to see how you do the samorodok process you've spoke of to bring out the design. :D
Roger Hooper wrote:
That medallion is really beautiful. It has the virtue of being a modern design that honors the past.


Thanks Roger, I like the way you put it!

Reticulation however, I don't think is modern jewelry per se, Carl Faberge only promoted it in the 1800's and called it "samorodok", which basically means reticulation.

Thanks for your good words Jeremiah. That's right, it is a good 55.5 inches long! The XVa-2L /2W on my website is even 2 inches taller http://gloryships.com/pages/swords-all/page-01/02-XVa-2L.html
and was inspired by this one, having more or less the same dimensions;


 Attachment: 14.22 KB
49580 copy.jpg

JE Sarge wrote:
That inset is simply stunning in close detail. It has an amazing antiquated look to it.

I'd really like to see how you do the samorodok process you've spoke of to bring out the design. :D


Thanks Jonathan, I appreciate it.

The process of reticulation is no secret, it is pretty well covered on the internet. It is a matter of controlled technique and a very thorough knowledge and practice of the process. I would say, it's almost like cooking - recipes are available everywhere, but still everybody cooks differently.
It just looks great. Not sure what makes it that way, but it does.

Maybe it's the lenght that gives it such... lissom appearence?
Thank you Bartek.

I'm glad you like it.

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum