Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Artisans selling blade only Reply to topic
This is a standard topic  
Author Message
M. Adair Orr





Joined: 26 Jan 2004

Posts: 97

PostPosted: Mon 01 Dec, 2008 8:21 pm    Post subject: Artisans selling blade only         Reply with quote

Hello,

I'm a newcomer here. I've kept my interest in longswords at bay for some time, choosing instead to pursue making armour. I have recently been overcome by the desire to purchase a blade, but I have yet to find an artisan who has put together the blade I am craving. I am looking for a German longsword, with siderings and a pronounced fuller, perhaps an arming sword would be the more appropriate term: I am no WMA specialist, definitely a newcomer to this arena. I have finally realized that I would be better off searching for a professionally made blade and construct the hilt myseltf. I find most cast hilts are not evocotive of the originals they seek to duplicate and Forging a hilt and pommel present no problem. I'm sure I can learn to construct and bind the grip. Do any of the major sword manufacturers offer their blades alone for purchase?

I have been drawn to the AA German Bastard Sword, and the Albion Hauptmann seems promising with a rudimentary sidering. But the former is not quite right for my taste and the later is not yet available and perhaps not substantial enough. Lutel and Pavel moc do not quite strike a favorable chord as far as authentic character to my eye. Any suggestions for a blade? The hilt that Arms and Armor modeled their replica from is very similar to what I am after, though they did not at all capture the grip and I would prefer straight Quillons. Think circa 1500-1520, bold fuller, stout blade. Any input is appreciated.

Cheers, Adair
View user's profile Send private message
Nathan Robinson
myArmoury Admin


myArmoury Admin

PostPosted: Mon 01 Dec, 2008 8:28 pm    Post subject:         Reply with quote

Arms & Armor will sell you a bare blade. I've had them create a custom blade for me.
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
View user's profile Send private message Send e-mail Visit poster's website
Bill Grandy
myArmoury Team


myArmoury Team

Location: Northern VA,USA
Joined: 25 Aug 2003
Reading list: 43 books

Spotlight topics: 2
Posts: 4,194

PostPosted: Mon 01 Dec, 2008 9:13 pm    Post subject:         Reply with quote

In addition to Nathan's suggestion, you may also consider having Arms and Armor modify their current German Bastard Sword, as they do customizations for an additional fee.
HistoricalHandcrafts.com
-Inspired by History, Crafted by Hand


"For practice is better than artfulness. Your exercise can do well without artfulness, but artfulness is not much good without the exercise.” -anonymous 15th century fencing master, MS 3227a
View user's profile Send private message Visit poster's website
Tim Lison




Location: Chicago, Illinois
Joined: 05 Aug 2004
Likes: 1 page
Reading list: 6 books

Spotlight topics: 1
Posts: 1,606

PostPosted: Mon 01 Dec, 2008 9:32 pm    Post subject:         Reply with quote

If you are going to construct the hilt and grip yourself, then the Albion Hauptman is not out of the question. It shares a blade with the Gallowglass which IS available and for $55 less than the Hauptman! If it's for the blade only then it wouldn't really matter that the hilt wasn't what you wanted....
View user's profile Send private message
M. Adair Orr





Joined: 26 Jan 2004

Posts: 97

PostPosted: Mon 01 Dec, 2008 10:06 pm    Post subject:         Reply with quote

Thank you both,

I think I will come up with a drawing of what I have in mind. I would be very pleased with the AA blade if it had a fullered section, though I may yet consider it depending on the cost.

If the Hauptmann blade were available as a blade only, I would be very interested, though ideally having read reviews of this type, I think I am looking for something more robust as I stated above. I will report back with an image.

So far, the Albion Viceroy blade seems to represent what I am looking for, though I need to research the typology.

Cheers, Adair
View user's profile Send private message
M. Adair Orr





Joined: 26 Jan 2004

Posts: 97

PostPosted: Mon 01 Dec, 2008 10:12 pm    Post subject:         Reply with quote

Let's try this: The Hilt I have in mind with the Viceroy blade profile. 47" OAL

Not sure about posting images, but I will give this a try...


Cheers, Adair



Last edited by M. Adair Orr on Mon 01 Dec, 2008 11:26 pm; edited 4 times in total
View user's profile Send private message
Jordan A.





Joined: 09 Oct 2008

Posts: 15

PostPosted: Mon 01 Dec, 2008 10:25 pm    Post subject:         Reply with quote

The links section lists a few custom makers, try John Lundemo of Odinblades. John was posting last month that he was taking bare blade orders with a reasonably quick turn around, and he could make whatever you wanted. Look him up he does awsome work, I have commissioned a Zweihander from John and cant wait to get it.
View user's profile Send private message
Will C




Location: Brisbane, Australia
Joined: 22 Nov 2008

Posts: 22

PostPosted: Tue 02 Dec, 2008 3:38 am    Post subject:         Reply with quote

You could also try www.Armorymarek.com from memory he has a couple of swords that resemble your drawing
View user's profile Send private message
Chad Arnow
myArmoury Team


myArmoury Team

PostPosted: Tue 02 Dec, 2008 5:43 am    Post subject:         Reply with quote

Albion doesn't like to sell bare blades, but you could probably work out a custom project with Christian Fletcher using an Albion blade.
Happy

ChadA

http://chadarnow.com/
View user's profile Send private message Send e-mail Visit poster's website
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

PostPosted: Tue 02 Dec, 2008 7:56 am    Post subject:         Reply with quote

Here are two inexpensive options for a decent blade of this general type:

http://www.kultofathena.com/product~item~5008...gsword.htm

http://www.kultofathena.com/product~item~5007...+Sword.htm

Windlass blades tend to be pretty good.

-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
M. Adair Orr





Joined: 26 Jan 2004

Posts: 97

PostPosted: Tue 02 Dec, 2008 6:43 pm    Post subject:         Reply with quote

Thank you all for your input. Pity that Albion does not sell their bare blades, I guess they guarantee a level of quality control in marketing that way. I would likely do the same in their position.

I was ideally looking for a manufactured blade to avoid paying for a one-off custom creation. The windlass blades are ones I have seen, and while I've noted improved reviews for some of their swords, my faith in the quality of their product is not high enough to warrant putting in the time and effort. I guess I am steadily constructing my own rigid cell here to languish in. I will start inquiring with the custom blade makers that have been recommended and see what the asking price for a blade of this style is.

Cheers, Adair
View user's profile Send private message
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

PostPosted: Wed 03 Dec, 2008 6:49 am    Post subject:         Reply with quote

FWIW, Windlass fails mainly in assembly and accuracy of detail rather than in blade quality. In fact, the blades are usually the best part of the best Windlass swords.
-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Sa'ar Nudel




Location: Haifa, Israel
Joined: 02 Dec 2005
Likes: 16 pages

Posts: 361

PostPosted: Wed 03 Dec, 2008 9:01 am    Post subject:         Reply with quote

Del Tin will also sell bare blades.
http://www.deltin.net/home.htm

Curator of Beit Ussishkin, regional nature & history museum, Upper Galilee.
View user's profile Send private message Visit poster's website
Chris Last




Location: Janesville, WI
Joined: 21 Jun 2004
Reading list: 8 books

Spotlight topics: 1
Posts: 264

PostPosted: Wed 03 Dec, 2008 9:11 am    Post subject:         Reply with quote

Just a shout out for Ollin Swords, as they are pretty awesome to work with for custom projects and general cutlery.
" Hang fires are all fun and games untill someone gets their eye poked out... by charging calvary." - J.Shoemaker

Chris Last
GSM-Bristol
http://www.gsmbristol.org
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Off-topic Talk > Artisans selling blade only
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum