Stephan Hall
|
 Posted: Sun 03 Feb, 2008 1:35 am Post subject: Hischkrone swordblade |
 |
|
While searching for knife and daggerblades for my next projekts I found some hirschfänger a palaschblade and a swordblade at http://weberknives.de. Its crossection is slightly oval the blade is 75 cm long .
the tang ist 12 cm long its 5mm thick and 35mm wide and made out of carbon steel.
It has no fullers. it costs 79€
Unfortunatly the side is german only.
but take a look at it here
http://weberknives.de/d_WK___006_Leicht_ovale...ge2166.htm
so do someone know any references for such a blade.
|
|
This is a standard topic
