[Merv Cannon]

There is a great sword stuck up on a section of St Georges College Chapel, Windsor .......... http://www.stgeorges-windsor.org/history/hist_index.asp ...... reported to be the "Bearing" sword of Edward III and I was wondering if anyone has any decent pictures, close-up details or even better, and article or drawing of it. Perhaps some of you might know which books have reference to it ? It may not be a bearing sword but I am finding it hard to get any good historic information on it.
Thanks !

[Chad Arnow]

From our Edward III article:



It's a very similar pic to the one you showed. I've never seen any more than that, and I've looked.

I've seen it in person (briefly and from a distance). St. George's didn't allow any picture-taking when I was there.

It's big, but not as big as many bearing swords. It's certainly very, very large for its era, if I recall correctly. I believe Oakeshott called it a bearing sword, though it's been a while since I've done any reading on the subject.

[Edward Hitchens]

In the first draft of the article I wrote about Edward III, I mentioned that the blade has the profile of a Type XVII, but after looking closely at Chad's picture, I'm not so sure. The fourteenth century may be a bit early for XVII, especially in England. It almost looks like it has a wide fuller running the entire length of the blade. Is it just me, or is there a ricasso just above the cross? The grip looks as though it has been perfectly preserved (unless it's a modern replacement).

[Richard Fay]

Hello all!

I did some digging through my books, and found mention of this sword in Oakeshott's Records of the Medieval Sword. He considered it to be a type XIIIa. Keep in mind that Oakeshott sometimes shifted swords from one type to another, but he also put some swords into his typology that may be different from the "norm" for that type (the rather odd type XVIIIa with fairly parallel edges, a long ricasso, and an extremely sharply-defined mid-rib that he showed in Records as Type XVIIIa. 7 is one example.) A closer inspection of this sword may place it in another type category, who knows?

Anyway, here's what Oakeshott said about this sword in Records of the Medieval Sword:

[Merv Cannon]

Thanks Richard , Edward, Chad...........Its suprising (or mabye not ! ) that so little has been documented about this Historic Sword ! I guess that when people live in countries that are dripping in History all around them, they sort of take it all for granted......thanks for the input....every bit helps. You see, I just got the Hanwei version of the Edward III war sword, and I must say that laying it next to the photos of the original, it looks identical even down to the adder-skin grip ! Its very sharp and pointy !! Now, my good friend is a dealer here for these and other merchandise.... http://www.themedievalemporium.com/ .......( if fact, if I may humbly give myself a quick plug, if you go to the " Furiture and Wooodcraft " page,.... that's all my stuff ) ...but Im back to doing Arms and Armour right now. Anyhow, he's a big fan of Edward and son and asked if I had any reference for the bearing sword. I'd certinally like to get some good photos or a drawing from somewhere for my own files.
Cheers !

[Greg Coffman]

I feel like this is a safe place to confess ignorance. What is a bearing sword?

[Nathan Robinson]

[Chad Arnow]

[Richard Fay]

Hello all!

This doesn't say much more, although it gives a length. Here's what the web site for St. George's Chapel said about the two-handed sword of Edward III: