Go to page 1, 2  Next

A&A April Highlight Item
Hello Everyone

Arms & Armor Highlight items for April, yes I said items, will be the #058 Classic Medieval Dagger and the #130 Crusader Dagger. Your choice or both for $135.00 each. Check out the newspage for details and some new items and custom pieces.

Really busy at the moment so I have to go but more on that soon :)


 Attachment: 15.5 KB
april01.jpg

Can't wait to hear why you're so busy at the moment. Sounds like big news :D
Its May!
Can't wait to see what the surprise will be this month!!! :D :D :D
June's Highlight Item was just posted on the Arms & Armor site.
Yes A & A strike again a blow at my bank balance. :p

The axe looks very very tempting and the price is hard to resist ........... Hmmmmmmm: Another E-Mail to Craig is very possible.

I wonder what other surprises he has in the pipeline ? It's good to have a few things from A & A in the lower price range as well as the medium price range. :D Although A & A does have some more expensive things in the high or high-medium range the value for money is way up there IMHO.

Link to special page to save you guys some time: http://www.arms-n-armor.com/news.html
A question for Craig,

Is the head blackened? If this is so will the final version be likewise? What time period does this axe represent?

Thanks,
Jeremy
Nathan Robinson wrote:
June's Highlight Item was just posted on the Arms & Armor site.


Whew!

Going to need a couple of them!!
Jean Thibodeau wrote:
Yes A & A strike again a blow at my bank balance. :p

The axe looks very very tempting and the price is hard to resist ........... Hmmmmmmm: Another E-Mail to Craig is very possible.

I wonder what other surprises he has in the pipeline ? It's good to have a few things from A & A in the lower price range as well as the medium price range. :D Although A & A does have some more expensive things in the high or high-medium range the value for money is way up there IMHO.

Link to special page to save you guys some time: http://www.arms-n-armor.com/news.html


Yeah...well I just called and bought two of them on an impulse. One for myself, on for a Christma gift. Never have bought a weapon on impulse before. I should probably hope it don't become a trend.

They ship Monday but only because I caught Craig at 5 PM his time. Actualy pretty cool that somebody over there picked up right when they should have been closing.
Are these axe heads forged or cast? I may need two or three! :lol:
Nordland Axe
Hi Guys

The heads will be black Jeremy on both the Highlight item and the stock piece when it is ready. It helps keep the price down. You of course can order them with no paint and finish the steel up yourself if you like.

R.E. they are cast in tool steel. Save reason as above, hand forging axes at that price would mean paying ourselves far east wages and my wife would not approve ;) They hold up pretty well and would equate to a medium to low cabon steel from the period as far as durability and such.

Keep well
Craig
Time Frame
OOps forgot time frame.

Axe heads in several varieties will ebb and flow in history with styles reappearing over time. There are a couple of periods where something like this could be seen. The ones we looked to as examples for this are of late Roman through early Viking period. The particular one in Peterson was found with a sword that had Carolingian influences.

Best
Craig
Just recieved two of these today.

Darn nice for the cash involved.
Joe Fults wrote:
Just recieved two of these today.

Darn nice for the cash involved.


Good, mine is now official as Craig E-mailled me to confirm, any short review would be appreciated. ( Well the above was short and could be called a really small review ! )

Would these make good throwers like a Francisca in some ways if somewhat different in aesthetics.

Well, now I could throw the axe and then close in with my Iberian mace. :lol:
Have not tried throwing them, but I think they would throw well enough. Handle seems to be well formed and sturdy. Its all secured together by a wooden wedge which, based on what I've seen from old farm axes, might work loose over time. I suspect the handle is Ash, but don't know for sure, ovalized. Cleanly executed overall.
Craig (and/or Joe),

Any predictions to how well the axe might hold up to HEAVY use? (e.g. splitting wood)

For this price, I'd be up for trying one out as a working axe, but only if you guys think that it could handle the repeated shock. I wouldn't think less of the piece if it isn't. After all, there are differences between purpose built weapons and tools. This looks similar enough to some working axe designs that I thought I'd ask, though. :D
Doug Gardner wrote:
Craig (and/or Joe),

Any predictions to how well the axe might hold up to HEAVY use? (e.g. splitting wood)

For this price, I'd be up for trying one out as a working axe, but only if you guys think that it could handle the repeated shock. I wouldn't think less of the piece if it isn't. After all, there are differences between purpose built weapons and tools. This looks similar enough to some working axe designs that I thought I'd ask, though. :D


At the price it would seem attractive carrying it when there would be a good legal excuse for it like camping trips or work related uses. As long as the cast steel is not brittle and capable of holding a reasonable edge it would make a good working axe. These do seem very generic as opposed to specialized carpentry axes and might have easily been intended for both fighting and general use: Unless the blade is very thin, them maybe more a fighting tool ?

As far as loosening of the head I would use some epoxy glue if ever it got loose before hammering the wedge back in.

Not very historical. :p :lol: And makes changing handles more difficult: Cut the handle flush and then drill it out with multiple holes and chisel the rest of the wood out.
Doug Gardner wrote:
Craig (and/or Joe),

Any predictions to how well the axe might hold up to HEAVY use? (e.g. splitting wood)

For this price, I'd be up for trying one out as a working axe, but only if you guys think that it could handle the repeated shock. I wouldn't think less of the piece if it isn't. After all, there are differences between purpose built weapons and tools. This looks similar enough to some working axe designs that I thought I'd ask, though. :D


That's going to have to be a Craig question.
Axe
Evenin Guys

I am not sure heavy use in the context of lets split a cord of wood kind of work would be applicable. The leverage and handle length are not the best for heavy splitting but as a camp axe it should do pretty well. Tool steel head will hold a bit of an edge especially against softer woods and would work well for camp duty type jobs i.e. loping branches splitting kindling the odd stake pounding, that type of thing. The head shape is close to the axes they used for blazing trails in the colonial period. The longer beards are not the best for heavy chopping but are good for controled shaping and such.

You also see a few heads like this in boarding axes from the age of sail.

I have tried throwing them a bit and they seem pretty good.

Best
Craig
Re: Axe
Craig Johnson wrote:
Evenin Guys

I am not sure heavy use in the context of lets split a cord of wood kind of work would be applicable. The leverage and handle length are not the best for heavy splitting but as a camp axe it should do pretty well. Tool steel head will hold a bit of an edge especially against softer woods and would work well for camp duty type jobs i.e. loping branches splitting kindling the odd stake pounding, that type of thing. The head shape is close to the axes they used for blazing trails in the colonial period. The longer beards are not the best for heavy chopping but are good for controled shaping and such.

You also see a few heads like this in boarding axes from the age of sail.

I have tried throwing them a bit and they seem pretty good.

Best
Craig


Sounds good, is there enough carbon content to just selectively heatreat the edge to a axelike " moderate hardness ?
The extra cost would be fine with me if it' s doable. Depending on what kind of quenching ( Water, air or oil ) it might be possible to just use an acetylene torch to do a selective heating of just the last 3/4" of edge ? If it' s not something you want to do it' s not a deal breaker for me. :cool:
Axe
Hello Jean

Yes we could quench the edge. I am not sure how hard we could get the piece I would have to try ait and see. Probably into the period range of hardness for some of these pieces but I doubt getting close to the 50's range.

One could weld on a cutting edge to get that if it was needed but I do not think even modern axes are hardened to that point.

Best
Craig
Go to page 1, 2  Next

Page 1 of 2

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum